On Tue, Oct 17, 2017 at 11:06:22AM +0200, Maxime Ripard wrote:
> The TCON supports the LVDS interface to output to a panel or a bridge.
> Let's add support for it.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/sun4i/Makefile | 1 +-
> drivers/gpu/drm/sun4i/sun4i_lvds.c | 183 ++++++++++++++++++++++++++++-
> drivers/gpu/drm/sun4i/sun4i_lvds.h | 18 +++-
> drivers/gpu/drm/sun4i/sun4i_tcon.c | 193 +++++++++++++++++++++++++++++-
> drivers/gpu/drm/sun4i/sun4i_tcon.h | 25 ++++-
> 5 files changed, 419 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_lvds.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_lvds.h
>
[...]
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index 3efa1ab045cd..6a20a467ee6d 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
[...]
> @@ -698,6 +858,26 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
> return ret;
> }
>
> + /*
> + * This can only be made optional since we've had DT nodes
> + * without the LVDS reset properties.
> + *
> + * If the property is missing, just disable LVDS, and print a
> + * warning.
> + */
> + tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds");
> + if (IS_ERR(tcon->lvds_rst)) {
> + dev_err(dev, "Couldn't get our reset line\n");
> + return PTR_ERR(tcon->lvds_rst);
> + } else if (tcon->lvds_rst) {
> + has_lvds = true;
> + reset_control_reset(tcon->lvds_rst);
> + } else {
> + has_lvds = false;
> + dev_warn(dev,
> + "Missing LVDS reset property, you should consider upgrading your DT\n");
This will generate annoying warning for tcon1 on A10/A20.
> + }
> +
> ret = sun4i_tcon_init_clocks(dev, tcon);
> if (ret) {
> dev_err(dev, "Couldn't init our TCON clocks\n");
> @@ -729,7 +909,18 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
> goto err_free_clocks;
> }
>
> - ret = sun4i_rgb_init(drm, tcon);
> + /*
> + * If we have an LVDS panel connected to the TCON, we should
> + * just probe the LVDS connector. Otherwise, just probe RGB as
> + * we used to.
> + */
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
