On Tue, Oct 17, 2017 at 5:06 PM, Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote: > Hi, > > Here is an attempt at supporting the LVDS output in our DRM driver. This > has been tested on the A83T (with DE2), but since everything is basically > in the TCON, it should also be usable on the older SoCs with minor > modifications. > > This was the occasion to refactor a bunch of things. The most notable ones > would be the documentation, and split of the UI layers in the mixer code, > and the switch to kfifo for our endpoint parsing code in the driver that > fixes an issue introduced by the switch to BFS. > > Let me know what you think, > Maxime > > Maxime Ripard (23): > drm/sun4i: Implement endpoint parsing using kfifo > drm/sun4i: Realign Makefile padding and reorder it > drm/sun4i: tcon: Make tcon_set_mux mode argument const > drm/sun4i: tcon: Make tcon_get_clk_delay mode argument const > drm/sun4i: tcon: Don't rely on encoders to enable the TCON > drm/sun4i: tcon: Don't rely on encoders to set the TCON mode > drm/sun4i: tcon: Move out the tcon0 common setup > dt-bindings: panel: lvds: Document power-supply property > drm/panel: lvds: Add support for the power-supply property > clk: sunxi-ng: Add A83T display clocks > drm/sun4i: Rename layers to UI planes > drm/sun4i: sun8i: properly support UI channels > drm/sun4i: Reorder and document DE2 mixer registers > drm/sun4i: Create minimal multipliers and dividers > drm/sun4i: Add LVDS support > drm/sun4i: Add A83T support > arm: dts: sun8i: a83t: Add display pipeline > arm: dts: sun8i: a83t: Enable the PWM > arm: dts: sun8i: a83t: Add LVDS pins group > arm: dts: sun8i: a83t: Add the PWM pin group > arm: dts: sun8i: a711: Add regulator support > arm: dts: sun8i: a711: Enable USB OTG > arm: dts: sun8i: a711: Enable the LCD AFAIK ARM should be uppercase for armv7, and lowercase for arm64. ChenYu _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
