2017년 09월 29일 19:05에 Andrzej Hajda 이(가) 쓴 글:
> MIXER in SoCs prior to Exynos5420 supports only 4 video modes:
> 720x480, 720x576, 1280x720, 1920x1080. Support for other modes
> can be enabled by manipulating timings of HDMI. To do it
> adjusted_mode should contain actual mode set on crtc.
> With this patch it is possible to enable 1024x768 and 1280x1024
> modes in MIXER.
>
> Suggested-by: Daniel Drake <drake@xxxxxxxxxxxx>
> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> Reviewed-by: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/exynos/exynos_hdmi.c | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
> index 7225b6521148..4b081f6cfdcb 100644
> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
> @@ -1239,6 +1239,17 @@ static void hdmi_v13_mode_apply(struct hdmi_context *hdata)
> static void hdmi_v14_mode_apply(struct hdmi_context *hdata)
> {
> struct drm_display_mode *m = &hdata->encoder.crtc->state->mode;
> + struct drm_display_mode *am = &hdata->encoder.crtc->state->adjusted_mode;
> + int hquirk = 0;
> +
> + /*
> + * In case video mode coming from CRTC differs from requested one HDMI
> + * sometimes is able to almost properly perform conversion - only
> + * first line is distorted.
> + */
> + if ((m->vdisplay != am->vdisplay) &&
> + (m->hdisplay == 1280 || m->hdisplay == 1024))
> + hquirk = 258;
Andrzej,
The distorted value couldn't be described logically? Just I wonder why the difference happens.
Thanks,
Inki Dae
>
> hdmi_reg_writev(hdata, HDMI_H_BLANK_0, 2, m->htotal - m->hdisplay);
> hdmi_reg_writev(hdata, HDMI_V_LINE_0, 2, m->vtotal);
> @@ -1332,8 +1343,8 @@ static void hdmi_v14_mode_apply(struct hdmi_context *hdata)
> hdmi_reg_writev(hdata, HDMI_V_SYNC_LINE_AFT_PXL_6_0, 2, 0xffff);
>
> hdmi_reg_writev(hdata, HDMI_TG_H_FSZ_L, 2, m->htotal);
> - hdmi_reg_writev(hdata, HDMI_TG_HACT_ST_L, 2, m->htotal - m->hdisplay);
> - hdmi_reg_writev(hdata, HDMI_TG_HACT_SZ_L, 2, m->hdisplay);
> + hdmi_reg_writev(hdata, HDMI_TG_HACT_ST_L, 2, m->htotal - m->hdisplay - hquirk);
> + hdmi_reg_writev(hdata, HDMI_TG_HACT_SZ_L, 2, m->hdisplay + hquirk);
> hdmi_reg_writev(hdata, HDMI_TG_V_FSZ_L, 2, m->vtotal);
> if (hdata->drv_data == &exynos5433_hdmi_driver_data)
> hdmi_reg_writeb(hdata, HDMI_TG_DECON_EN, 1);
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
