On Wed, Oct 11, 2017 at 7:47 AM, Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote: > On Mon, Oct 09, 2017 at 10:41:38AM -0400, Ilia Mirkin wrote: >> Hello, >> >> As a bit of background, all NVIDIA GPUs since GT215 have an audio >> subfunction for HDMI(/DP) audio to be sent to the sink. This generally >> works. >> >> However some, especially laptop, devices come up with that function >> disabled. We have a quirk to enable it when coming back from runpm, >> but that doesn't help the init case. Basically we have to write a bit >> to the PCI config space: >> >> https://github.com/torvalds/linux/blob/v4.12/drivers/gpu/drm/nouveau/nouveau_drm.c#L783 >> >> (MMIO 0x88000 is an alias for the PCI config space) > > /* do magic */ > nvif_mask(&device->object, 0x088488, (1 << 25), (1 << 25)); > > Wow, that *is* inscrutable magic. I gave up trying to convince myself > that this turns into pci_write_config_word() eventually. > > 0x88000 is way too big for an offset into PCI config space (it's only > 4096 bytes per device at most), so I don't know what sort of alias it > could be. It doesn't look like a MMCONFIG address (which the driver > shouldn't be using directly anyway). 0x88000 is an offset into one of the BARs. At this offset is a mirror of the PCI config space (or you could say that the PCI config space is a mirror of these registers... we'll never know). The "magic" comment probably refers to flipping the bit though, since it's the "make it work" bit. > >> This works for runtime pm resume, since the device was originally >> there and we just have to make sure the underlying device agrees with >> it, but when it's missing on boot, we have to convince linux that it >> exists, bind a driver, etc. >> >> What's the best way of going about doing that? > > If you make an early quirk for the GPU device, we'll run the quirk > while enumerating it. If it can enable the audio device, and if the > audio device is at a higher device number, the PCI core should try to > enumerate it later. But there might be wrinkles if setting the bit > turns a single-function device into a multi-function one, because the > core might have already decided it didn't need to scan for more > functions. DECLARE_PCI_FIXUP_CLASS_EARLY() is the place to start. I thought about this type of approach but I have two concerns: - We can't just do this willy-nilly on *any* NVIDIA GPU, only on "new" ones. The definition of "new" here, of course, is like 2010, and there have been a lot of chips released since then. Each chip is allocated a group of 0x20 or 0x40 PCI device ids, but it'll still be a lot of code. Do you really want this in drivers/pci/quirks.c? - This fixup will be applied no matter what. I wonder if that's an OK thing to do -- feels like this sort of thing should be scoped to the driver. I was assuming there'd be some magic hotplug function that could be called. I suppose we could condition the quirk on CONFIG_NOUVEAU being built (into the kernel or otherwise), but that's still a coarse tool given that distros enable everything. How would I find out about the single-function vs multi-function issue? Is there a separate bit in the pci config that indicates a multi-function device, or do you just mean it's an implementation issue in the pci core which might not handle a quirk that adds a second device? FWIW the GPU always comes up on .0, while the audio function comes up on .1. I've never seen an NVIDIA GPU where that's different. Thanks, -ilia _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
