Hi rob,
Thanks for your reply.
在 2017/10/4 5:56, Rob Herring 写道:
On Fri, Sep 22, 2017 at 11:00:26AM +0800, Sandy Huang wrote:
This path add support rv1108 rgb output interface driver.
Signed-off-by: Sandy Huang <hjc@xxxxxxxxxxxxxx>
---
Changes in v2:
1. rename rockchip,rgb-mode to rgb-mode;
You can't just drop the vendor. This needs to be documented in a common
place that others will find and use. See panel-common.txt or
panel-dpi.txt.
Alternatively, you could just drop it and let the panel compatible imply
what the mode is.
ok, get it, i will move the rgb-mode to panel and describe it at
panel-rgb.txt. the patches will be send soon later.
2. delete reg for signle endpoint;
.../bindings/display/rockchip/rockchip-rgb.txt | 78 ++++++++++++++++++++++
1 file changed, 78 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
new file mode 100644
index 0000000..86bd1ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
@@ -0,0 +1,78 @@
+Rockchip RV1108 RGB interface
+================================
+
+Required properties:
+- compatible: matching the soc type:
+ - "rockchip,rv1108-rgb";
+
+Optional properties:
+- pinctrl-names: must contain a "lcdc" entry.
+- pinctrl-0: pin control group to be used for this interface.
+
+Required nodes:
+- rgb-mode: should be "p888", "p666", "p565", "s888", "s888-dummy"
+ - p888: output r8-g8-b8 at each dclk cycle for per-pixel
+ - p666: output r6-g6-b6 at each dclk cycle for per-pixel
+ - p565: output r5-g6-b5 at each dclk cycle for per-pixel
+ - s888: output r8-g8-b8 in three dclk cycle for per-pixel
+ - s888-dmmy: output r8-g8-b8-dummy in four dclk cycle for per-pixel
+
+The rgb has two video ports described by:
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+Their connections are modeled using the OF graph bindings specified in
+ Documentation/devicetree/bindings/graph.txt.
+
+- video port 0 for the VOP input, the remote endpoint maybe vopb/vopl/vop
+- video port 1 for either a panel or subsequent encoder
+
+the panel described by:
+ Documentation/devicetree/bindings/display/panel/simple-panel.txt
+Panel other required properties:
+- ports for remote rgb output.
+
+Example:
+
+panel: panel {
+ compatible = "auo,b101ean01";
+ enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ panel_in_rgb: endpoint {
+ remote-endpoint = <&rgb_out_panel>;
+ };
+ };
+};
+
+For Rockchip RV1108:
+
+ rgb: rgb {
+ compatible = "rockchip,rv1108-rgb";
+ pinctrl-names = "lcdc";
+ pinctrl-0 = <&lcdc_ctl>;
+ rgb-mode = "p888";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgb_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgb_in_vop: endpoint {
+ remote-endpoint = <&vop_out_rgb>;
+ };
+ };
+
+ rgb_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgb_out_panel: endpoint {
+ remote-endpoint = <&panel_in_rgb>;
+ };
+ };
+ };
+ };
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
