[Bug 96868] AMDGPU Tonga only does 2560x1440 at 120hz, switching to 144hz causes display errors, same thing used to happen with fglrx.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Comment # 32 on bug 96868 from
I wanted to add a comment, because I'm also affected with a slightly different
setup then most of the users that posted here.
I have a Radeon R9 390, use an up-to-date Arch Linux (Kernel 4.13.3-1-ARCH with
xf86-video-amdgpu 1.4.0) but with only a 60Hz screen with therefore a 4K/HiDPI
screen (resolution 3840x2160).
I also have lots of flickering and artefacts.
The problem is solved setting the power level to high, but as it raises the
temps from 50/51 to more then 60°C with the electricity consumption and cooler
going up it's not an option for me.
In low it flickers even more then in auto.

Using the manual setting however (that Andy Furniss mentioned in comment 15
from 2017-05-11 13:01:39 UTC) the problem is solved, the flickerin/tearing and
artifacting gone and the temperature seems to stay like before. (Thanks a lot
for that, Andy!)

Is it possible to make use of that solution to release it upstream?

Thanks for all the work and effort, by the way!


You are receiving this mail because:
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux