Using the ARRAY_SIZE macro improves the readability of the code. Also,
it is not always useful to use a variable to store this constant
calculated at compile time nor to re-invent the ARRAY_SIZE macro.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@xxxxxxxxxxxx>
---
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 9 +++++----
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 9 +++++----
drivers/gpu/drm/gma500/psb_intel_sdvo.c | 9 ++++-----
drivers/gpu/drm/i915/gvt/vgpu.c | 3 ++-
drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c | 7 ++++---
drivers/gpu/drm/via/via_verifier.c | 10 ++++------
6 files changed, 24 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index dfc10b1baea0..304862e2a8a6 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -20,6 +20,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*
*/
+#include <linux/kernel.h>
#include <linux/firmware.h>
#include <drm/drmP.h>
#include "amdgpu.h"
@@ -3952,10 +3953,10 @@ static int gfx_v8_0_init_save_restore_list(struct amdgpu_device *adev)
adev->gfx.rlc.reg_list_format_size_bytes >> 2,
unique_indices,
&indices_count,
- sizeof(unique_indices) / sizeof(int),
+ ARRAY_SIZE(unique_indices),
indirect_start_offsets,
&offset_count,
- sizeof(indirect_start_offsets)/sizeof(int));
+ ARRAY_SIZE(indirect_start_offsets));
/* save and restore list */
WREG32_FIELD(RLC_SRM_CNTL, AUTO_INCR_ADDR, 1);
@@ -3977,14 +3978,14 @@ static int gfx_v8_0_init_save_restore_list(struct amdgpu_device *adev)
/* starting offsets starts */
WREG32(mmRLC_GPM_SCRATCH_ADDR,
adev->gfx.rlc.starting_offsets_start);
- for (i = 0; i < sizeof(indirect_start_offsets)/sizeof(int); i++)
+ for (i = 0; i < ARRAY_SIZE(indirect_start_offsets); i++)
WREG32(mmRLC_GPM_SCRATCH_DATA,
indirect_start_offsets[i]);
/* unique indices */
temp = mmRLC_SRM_INDEX_CNTL_ADDR_0;
data = mmRLC_SRM_INDEX_CNTL_DATA_0;
- for (i = 0; i < sizeof(unique_indices) / sizeof(int); i++) {
+ for (i = 0; i < ARRAY_SIZE(unique_indices); i++) {
if (unique_indices[i] != 0) {
WREG32(temp + i, unique_indices[i] & 0x3FFFF);
WREG32(data + i, unique_indices[i] >> 20);
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index deeaee1457ef..180726f4f34e 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -20,6 +20,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*
*/
+#include <linux/kernel.h>
#include <linux/firmware.h>
#include <drm/drmP.h>
#include "amdgpu.h"
@@ -1730,10 +1731,10 @@ static int gfx_v9_0_init_rlc_save_restore_list(struct amdgpu_device *adev)
adev->gfx.rlc.reg_list_format_size_bytes >> 2,
unique_indirect_regs,
&unique_indirect_reg_count,
- sizeof(unique_indirect_regs)/sizeof(int),
+ ARRAY_SIZE(unique_indirect_regs),
indirect_start_offsets,
&indirect_start_offsets_count,
- sizeof(indirect_start_offsets)/sizeof(int));
+ ARRAY_SIZE(indirect_start_offsets));
/* enable auto inc in case it is disabled */
tmp = RREG32(SOC15_REG_OFFSET(GC, 0, mmRLC_SRM_CNTL));
@@ -1770,12 +1771,12 @@ static int gfx_v9_0_init_rlc_save_restore_list(struct amdgpu_device *adev)
/* write the starting offsets to RLC scratch ram */
WREG32(SOC15_REG_OFFSET(GC, 0, mmRLC_GPM_SCRATCH_ADDR),
adev->gfx.rlc.starting_offsets_start);
- for (i = 0; i < sizeof(indirect_start_offsets)/sizeof(int); i++)
+ for (i = 0; i < ARRAY_SIZE(indirect_start_offsets); i++)
WREG32(SOC15_REG_OFFSET(GC, 0, mmRLC_GPM_SCRATCH_DATA),
indirect_start_offsets[i]);
/* load unique indirect regs*/
- for (i = 0; i < sizeof(unique_indirect_regs)/sizeof(int); i++) {
+ for (i = 0; i < ARRAY_SIZE(unique_indirect_regs); i++) {
WREG32(SOC15_REG_OFFSET(GC, 0, mmRLC_SRM_INDEX_CNTL_ADDR_0) + i,
unique_indirect_regs[i] & 0x3FFFF);
WREG32(SOC15_REG_OFFSET(GC, 0, mmRLC_SRM_INDEX_CNTL_DATA_0) + i,
diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
index e787d376ba67..84507912be84 100644
--- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c
+++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
@@ -37,6 +37,7 @@
#include "psb_drv.h"
#include "psb_intel_sdvo_regs.h"
#include "psb_intel_reg.h"
+#include <linux/kernel.h>
#define SDVO_TMDS_MASK (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1)
#define SDVO_RGB_MASK (SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1)
@@ -62,8 +63,6 @@ static const char *tv_format_names[] = {
"SECAM_60"
};
-#define TV_FORMAT_NUM (sizeof(tv_format_names) / sizeof(*tv_format_names))
-
struct psb_intel_sdvo {
struct gma_encoder base;
@@ -148,7 +147,7 @@ struct psb_intel_sdvo_connector {
int force_audio;
/* This contains all current supported TV format */
- u8 tv_format_supported[TV_FORMAT_NUM];
+ u8 tv_format_supported[ARRAY_SIZE(tv_format_names)];
int format_supported_num;
struct drm_property *tv_format;
@@ -1709,7 +1708,7 @@ psb_intel_sdvo_set_property(struct drm_connector *connector,
}
if (property == psb_intel_sdvo_connector->tv_format) {
- if (val >= TV_FORMAT_NUM)
+ if (val >= ARRAY_SIZE(tv_format_names))
return -EINVAL;
if (psb_intel_sdvo->tv_format_index ==
@@ -2269,7 +2268,7 @@ static bool psb_intel_sdvo_tv_create_property(struct psb_intel_sdvo *psb_intel_s
return false;
psb_intel_sdvo_connector->format_supported_num = 0;
- for (i = 0 ; i < TV_FORMAT_NUM; i++)
+ for (i = 0 ; i < ARRAY_SIZE(tv_format_names); i++)
if (format_map & (1 << i))
psb_intel_sdvo_connector->tv_format_supported[psb_intel_sdvo_connector->format_supported_num++] = i;
diff --git a/drivers/gpu/drm/i915/gvt/vgpu.c b/drivers/gpu/drm/i915/gvt/vgpu.c
index 02c61a1ad56a..9c6d2849c5b7 100644
--- a/drivers/gpu/drm/i915/gvt/vgpu.c
+++ b/drivers/gpu/drm/i915/gvt/vgpu.c
@@ -31,6 +31,7 @@
*
*/
+#include <linux/kernel.h>
#include "i915_drv.h"
#include "gvt.h"
#include "i915_pvinfo.h"
@@ -116,7 +117,7 @@ int intel_gvt_init_vgpu_types(struct intel_gvt *gvt)
*/
low_avail = gvt_aperture_sz(gvt) - HOST_LOW_GM_SIZE;
high_avail = gvt_hidden_sz(gvt) - HOST_HIGH_GM_SIZE;
- num_types = sizeof(vgpu_types) / sizeof(vgpu_types[0]);
+ num_types = ARRAY_SIZE(vgpu_types);
gvt->types = kzalloc(num_types * sizeof(struct intel_vgpu_type),
GFP_KERNEL);
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c
index b58ee99f7bfc..9cc10e438b3d 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c
@@ -36,6 +36,8 @@
#include <subdev/i2c.h>
#include <subdev/vga.h>
+#include <linux/kernel.h>
+
#define bioslog(lvl, fmt, args...) do { \
nvkm_printk(init->subdev, lvl, info, "0x%08x[%c]: "fmt, \
init->offset, init_exec(init) ? \
@@ -2271,8 +2273,6 @@ static struct nvbios_init_opcode {
[0xaa] = { init_reserved },
};
-#define init_opcode_nr (sizeof(init_opcode) / sizeof(init_opcode[0]))
-
int
nvbios_exec(struct nvbios_init *init)
{
@@ -2281,7 +2281,8 @@ nvbios_exec(struct nvbios_init *init)
init->nested++;
while (init->offset) {
u8 opcode = nvbios_rd08(bios, init->offset);
- if (opcode >= init_opcode_nr || !init_opcode[opcode].exec) {
+ if (opcode >= ARRAY_SIZE(init_opcode) ||
+ !init_opcode[opcode].exec) {
error("unknown opcode 0x%02x\n", opcode);
return -EINVAL;
}
diff --git a/drivers/gpu/drm/via/via_verifier.c b/drivers/gpu/drm/via/via_verifier.c
index 0677bbf4ec7e..fb2609434df7 100644
--- a/drivers/gpu/drm/via/via_verifier.c
+++ b/drivers/gpu/drm/via/via_verifier.c
@@ -34,6 +34,7 @@
#include <drm/drm_legacy.h>
#include "via_verifier.h"
#include "via_drv.h"
+#include <linux/kernel.h>
typedef enum {
state_command,
@@ -1102,10 +1103,7 @@ setup_hazard_table(hz_init_t init_table[], hazard_t table[], int size)
void via_init_command_verifier(void)
{
- setup_hazard_table(init_table1, table1,
- sizeof(init_table1) / sizeof(hz_init_t));
- setup_hazard_table(init_table2, table2,
- sizeof(init_table2) / sizeof(hz_init_t));
- setup_hazard_table(init_table3, table3,
- sizeof(init_table3) / sizeof(hz_init_t));
+ setup_hazard_table(init_table1, table1, ARRAY_SIZE(init_table1));
+ setup_hazard_table(init_table2, table2, ARRAY_SIZE(init_table2));
+ setup_hazard_table(init_table3, table3, ARRAY_SIZE(init_table3));
}
--
2.14.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
