[PATCH] drm/tinydrm: Replace dev_error with DRM_DEV_ERROR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert instances of dev_error to DRM_DEV_ERROR as we have
DRM_DEV_ERROR variants of drm print macros.

Signed-off-by: Harsha Sharma <harshasharmaiitr@xxxxxxxxx>
---
 drivers/gpu/drm/tinydrm/mi0283qt.c |  8 ++++----
 drivers/gpu/drm/tinydrm/repaper.c  | 26 +++++++++++++-------------
 drivers/gpu/drm/tinydrm/st7586.c   |  6 +++---
 3 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/tinydrm/mi0283qt.c b/drivers/gpu/drm/tinydrm/mi0283qt.c
index 7e5bb7d..7dded50 100644
--- a/drivers/gpu/drm/tinydrm/mi0283qt.c
+++ b/drivers/gpu/drm/tinydrm/mi0283qt.c
@@ -31,7 +31,7 @@ static int mi0283qt_init(struct mipi_dbi *mipi)
 
 	ret = regulator_enable(mipi->regulator);
 	if (ret) {
-		dev_err(dev, "Failed to enable regulator %d\n", ret);
+		DRM_DEV_ERROR(dev, "Failed to enable regulator %d\n", ret);
 		return ret;
 	}
 
@@ -42,7 +42,7 @@ static int mi0283qt_init(struct mipi_dbi *mipi)
 	mipi_dbi_hw_reset(mipi);
 	ret = mipi_dbi_command(mipi, MIPI_DCS_SOFT_RESET);
 	if (ret) {
-		dev_err(dev, "Error sending command %d\n", ret);
+		DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);
 		regulator_disable(mipi->regulator);
 		return ret;
 	}
@@ -175,13 +175,13 @@ static int mi0283qt_probe(struct spi_device *spi)
 
 	mipi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(mipi->reset)) {
-		dev_err(dev, "Failed to get gpio 'reset'\n");
+		DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
 		return PTR_ERR(mipi->reset);
 	}
 
 	dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW);
 	if (IS_ERR(dc)) {
-		dev_err(dev, "Failed to get gpio 'dc'\n");
+		DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n");
 		return PTR_ERR(dc);
 	}
 
diff --git a/drivers/gpu/drm/tinydrm/repaper.c b/drivers/gpu/drm/tinydrm/repaper.c
index 30dc97b..bd152bb 100644
--- a/drivers/gpu/drm/tinydrm/repaper.c
+++ b/drivers/gpu/drm/tinydrm/repaper.c
@@ -473,7 +473,7 @@ static void repaper_get_temperature(struct repaper_epd *epd)
 
 	ret = thermal_zone_get_temp(epd->thermal, &temperature);
 	if (ret) {
-		dev_err(&epd->spi->dev, "Failed to get temperature (%d)\n",
+		DRM_DEV_ERROR(&epd->spi->dev, "Failed to get temperature (%d)\n",
 			ret);
 		return;
 	}
@@ -629,7 +629,7 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb,
 	mutex_unlock(&tdev->dirty_lock);
 
 	if (ret)
-		dev_err(fb->dev->dev, "Failed to update display (%d)\n", ret);
+		DRM_DEV_ERROR(fb->dev->dev, "Failed to update display (%d)\n", ret);
 	kfree(buf);
 
 	return ret;
@@ -703,7 +703,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
 	}
 
 	if (!i) {
-		dev_err(dev, "timeout waiting for panel to become ready.\n");
+		DRM_DEV_ERROR(dev, "timeout waiting for panel to become ready.\n");
 		power_off(epd);
 		return;
 	}
@@ -725,9 +725,9 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
 	ret = repaper_read_val(spi, 0x0f);
 	if (ret < 0 || !(ret & 0x80)) {
 		if (ret < 0)
-			dev_err(dev, "failed to read chip (%d)\n", ret);
+			DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret);
 		else
-			dev_err(dev, "panel is reported broken\n");
+			DRM_DEV_ERROR(dev, "panel is reported broken\n");
 		power_off(epd);
 		return;
 	}
@@ -767,7 +767,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
 		/* check DC/DC */
 		ret = repaper_read_val(spi, 0x0f);
 		if (ret < 0) {
-			dev_err(dev, "failed to read chip (%d)\n", ret);
+			DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret);
 			power_off(epd);
 			return;
 		}
@@ -779,7 +779,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
 	}
 
 	if (!dc_ok) {
-		dev_err(dev, "dc/dc failed\n");
+		DRM_DEV_ERROR(dev, "dc/dc failed\n");
 		power_off(epd);
 		return;
 	}
@@ -959,7 +959,7 @@ static int repaper_probe(struct spi_device *spi)
 	if (IS_ERR(epd->panel_on)) {
 		ret = PTR_ERR(epd->panel_on);
 		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get gpio 'panel-on'\n");
+			DRM_DEV_ERROR(dev, "Failed to get gpio 'panel-on'\n");
 		return ret;
 	}
 
@@ -967,7 +967,7 @@ static int repaper_probe(struct spi_device *spi)
 	if (IS_ERR(epd->discharge)) {
 		ret = PTR_ERR(epd->discharge);
 		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get gpio 'discharge'\n");
+			DRM_DEV_ERROR(dev, "Failed to get gpio 'discharge'\n");
 		return ret;
 	}
 
@@ -975,7 +975,7 @@ static int repaper_probe(struct spi_device *spi)
 	if (IS_ERR(epd->reset)) {
 		ret = PTR_ERR(epd->reset);
 		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get gpio 'reset'\n");
+			DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
 		return ret;
 	}
 
@@ -983,7 +983,7 @@ static int repaper_probe(struct spi_device *spi)
 	if (IS_ERR(epd->busy)) {
 		ret = PTR_ERR(epd->busy);
 		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get gpio 'busy'\n");
+			DRM_DEV_ERROR(dev, "Failed to get gpio 'busy'\n");
 		return ret;
 	}
 
@@ -991,7 +991,7 @@ static int repaper_probe(struct spi_device *spi)
 					 &thermal_zone)) {
 		epd->thermal = thermal_zone_get_zone_by_name(thermal_zone);
 		if (IS_ERR(epd->thermal)) {
-			dev_err(dev, "Failed to get thermal zone: %s\n",
+			DRM_DEV_ERROR(dev, "Failed to get thermal zone: %s\n",
 				thermal_zone);
 			return PTR_ERR(epd->thermal);
 		}
@@ -1033,7 +1033,7 @@ static int repaper_probe(struct spi_device *spi)
 		if (IS_ERR(epd->border)) {
 			ret = PTR_ERR(epd->border);
 			if (ret != -EPROBE_DEFER)
-				dev_err(dev, "Failed to get gpio 'border'\n");
+				DRM_DEV_ERROR(dev, "Failed to get gpio 'border'\n");
 			return ret;
 		}
 
diff --git a/drivers/gpu/drm/tinydrm/st7586.c b/drivers/gpu/drm/tinydrm/st7586.c
index b439956..14361a5 100644
--- a/drivers/gpu/drm/tinydrm/st7586.c
+++ b/drivers/gpu/drm/tinydrm/st7586.c
@@ -187,7 +187,7 @@ static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe,
 	mipi_dbi_hw_reset(mipi);
 	ret = mipi_dbi_command(mipi, ST7586_AUTO_READ_CTRL, 0x9f);
 	if (ret) {
-		dev_err(dev, "Error sending command %d\n", ret);
+		DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);
 		return;
 	}
 
@@ -355,13 +355,13 @@ static int st7586_probe(struct spi_device *spi)
 
 	mipi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(mipi->reset)) {
-		dev_err(dev, "Failed to get gpio 'reset'\n");
+		DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
 		return PTR_ERR(mipi->reset);
 	}
 
 	a0 = devm_gpiod_get(dev, "a0", GPIOD_OUT_LOW);
 	if (IS_ERR(a0)) {
-		dev_err(dev, "Failed to get gpio 'a0'\n");
+		DRM_DEV_ERROR(dev, "Failed to get gpio 'a0'\n");
 		return PTR_ERR(a0);
 	}
 
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux