On 21/09/17 22:37, Maxime Ripard wrote: > Hi Hans, > > On Fri, Sep 08, 2017 at 10:59:44AM +0000, Hans Verkuil wrote: >> Hi Maxime, >> >> On 07/18/17 18:29, Maxime Ripard wrote: >>> Hi, >>> >>> On Tue, Jul 11, 2017 at 11:06:52PM +0200, Hans Verkuil wrote: >>>> On 11/07/17 22:39, Maxime Ripard wrote: >>>>> On Tue, Jul 11, 2017 at 08:30:33AM +0200, Hans Verkuil wrote: >>>>>> From: Hans Verkuil <hans.verkuil@xxxxxxxxx> >>>>>> >>>>>> This patch series adds CEC support for the sun4i HDMI controller. >>>>>> >>>>>> The CEC hardware support for the A10 is very low-level as it just >>>>>> controls the CEC pin. Since I also wanted to support GPIO-based CEC >>>>>> hardware most of this patch series is in the CEC framework to >>>>>> add a generic low-level CEC pin framework. It is only the final patch >>>>>> that adds the sun4i support. >>>>>> >>>>>> This patch series first makes some small changes in the CEC framework >>>>>> (patches 1-4) to prepare for this CEC pin support. >>>>>> >>>>>> Patch 5-7 adds the new API elements and documents it. Patch 6 reworks >>>>>> the CEC core event handling. >>>>>> >>>>>> Patch 8 adds pin monitoring support (allows userspace to see all >>>>>> CEC pin transitions as they happen). >>>>>> >>>>>> Patch 9 adds the core cec-pin implementation that translates low-level >>>>>> pin transitions into valid CEC messages. Basically this does what any >>>>>> SoC with a proper CEC hardware implementation does. >>>>>> >>>>>> Patch 10 documents the cec-pin kAPI (and also the cec-notifier kAPI >>>>>> which was missing). >>>>>> >>>>>> Finally patch 11 adds the actual sun4i_hdmi CEC implementation. >>>>>> >>>>>> I tested this on my cubieboard. There were no errors at all >>>>>> after 126264 calls of 'cec-ctl --give-device-vendor-id' while at the >>>>>> same time running a 'make -j4' of the v4l-utils git repository and >>>>>> doing a continuous scp to create network traffic. >>>>>> >>>>>> This patch series is based on top of the mainline kernel as of >>>>>> yesterday (so with all the sun4i and cec patches for 4.13 merged). >>>>> >>>>> For the whole serie: >>>>> Reviewed-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> >>>>> >>>>>> Maxime, patches 1-10 will go through the media subsystem. How do you >>>>>> want to handle the final patch? It can either go through the media >>>>>> subsystem as well, or you can sit on it and handle this yourself during >>>>>> the 4.14 merge window. Another option is to separate the Kconfig change >>>>>> into its own patch. That way you can merge the code changes and only >>>>>> have to handle the Kconfig patch as a final change during the merge >>>>>> window. >>>>> >>>>> We'll probably have a number of reworks for 4.14, so it would be >>>>> better if I merged it. >>>>> >>>>> However, I guess if we just switch to a depends on CEC_PIN instead of >>>>> a select, everything would just work even if we merge your patches in >>>>> a separate tree, right? >>>> >>>> This small patch will do it: >>>> >>>> diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig >>>> index e884d265c0b3..ebad80aefc87 100644 >>>> --- a/drivers/gpu/drm/sun4i/Kconfig >>>> +++ b/drivers/gpu/drm/sun4i/Kconfig >>>> @@ -25,7 +25,7 @@ config DRM_SUN4I_HDMI_CEC >>>> bool "Allwinner A10 HDMI CEC Support" >>>> depends on DRM_SUN4I_HDMI >>>> select CEC_CORE >>>> - select CEC_PIN >>>> + depends on CEC_PIN >>>> help >>>> Choose this option if you have an Allwinner SoC with an HDMI >>>> controller and want to use CEC. >> >> Just a reminder: now that both this driver and the CEC_PIN code has been >> merged in 4.14, this 'depends on' can become a 'select' again. > > Thanks for the reminder. > > Would that commit work for you: > http://code.bulix.org/19o9y6-201254 Acked-by: Hans Verkuil <hans.verkuil@xxxxxxxxx> This obviously should be merged for 4.14. Regards, Hans > > Maxime > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
