[PATCH 7/7 v3] drm/pl111: Add handling of Versatile platforms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The ARM reference designs in the Versatile family: Integrator,
Versatile and RealView can make use of the new DRM driver as well.
We just need to create a bit of platform-specific code for them
that we isolate to its own file.

Reviewed-by: Eric Anholt <eric@xxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog v2->v3:
- Rebase on DRM-TIP
ChangeLog v1->v2:
- Rebase on the other patches.
- Drop pad note from DOC section.
---
 drivers/gpu/drm/pl111/Makefile          |   1 +
 drivers/gpu/drm/pl111/pl111_display.c   |   7 -
 drivers/gpu/drm/pl111/pl111_drv.c       |   8 +-
 drivers/gpu/drm/pl111/pl111_versatile.c | 270 ++++++++++++++++++++++++++++++++
 drivers/gpu/drm/pl111/pl111_versatile.h |   9 ++
 5 files changed, 285 insertions(+), 10 deletions(-)
 create mode 100644 drivers/gpu/drm/pl111/pl111_versatile.c
 create mode 100644 drivers/gpu/drm/pl111/pl111_versatile.h

diff --git a/drivers/gpu/drm/pl111/Makefile b/drivers/gpu/drm/pl111/Makefile
index c5f8f9684848..fce1453a93e1 100644
--- a/drivers/gpu/drm/pl111/Makefile
+++ b/drivers/gpu/drm/pl111/Makefile
@@ -1,4 +1,5 @@
 pl111_drm-y +=	pl111_display.o \
+		pl111_versatile.o \
 		pl111_drv.o
 
 pl111_drm-$(CONFIG_DEBUG_FS) += pl111_debugfs.o
diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
index 68847a074331..cdb042951de0 100644
--- a/drivers/gpu/drm/pl111/pl111_display.c
+++ b/drivers/gpu/drm/pl111/pl111_display.c
@@ -450,13 +450,6 @@ int pl111_display_init(struct drm_device *drm)
 	}
 	of_node_put(endpoint);
 
-	if (tft_r0b0g0[0] != 0 ||
-	    tft_r0b0g0[1] != 8 ||
-	    tft_r0b0g0[2] != 16) {
-		dev_err(dev, "arm,pl11x,tft-r0g0b0-pads != [0,8,16] not yet supported\n");
-		return -EINVAL;
-	}
-
 	ret = pl111_init_clock_divider(drm);
 	if (ret)
 		return ret;
diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c
index 903e948afea1..b7dcf155bd0f 100644
--- a/drivers/gpu/drm/pl111/pl111_drv.c
+++ b/drivers/gpu/drm/pl111/pl111_drv.c
@@ -41,9 +41,6 @@
  * - Fix race between setting plane base address and getting IRQ for
  *   vsync firing the pageflip completion.
  *
- * - Expose the correct set of formats we can support based on the
- *   "arm,pl11x,tft-r0g0b0-pads" DT property.
- *
  * - Use the "max-memory-bandwidth" DT property to filter the
  *   supported formats.
  *
@@ -73,6 +70,7 @@
 #include <drm/drm_panel.h>
 
 #include "pl111_drm.h"
+#include "pl111_versatile.h"
 
 #define DRIVER_DESC      "DRM module for PL111"
 
@@ -255,6 +253,10 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
 		return ret;
 	}
 
+	ret = pl111_versatile_init(dev, priv);
+	if (ret)
+		goto dev_unref;
+
 	ret = pl111_modeset_init(drm);
 	if (ret != 0)
 		goto dev_unref;
diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c
new file mode 100644
index 000000000000..97d4af6925a3
--- /dev/null
+++ b/drivers/gpu/drm/pl111/pl111_versatile.c
@@ -0,0 +1,270 @@
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <drm/drmP.h>
+#include "pl111_versatile.h"
+#include "pl111_drm.h"
+
+static struct regmap *versatile_syscon_map;
+
+/*
+ * We detect the different syscon types from the compatible strings.
+ */
+enum versatile_clcd {
+	INTEGRATOR_CLCD_CM,
+	VERSATILE_CLCD,
+	REALVIEW_CLCD_EB,
+	REALVIEW_CLCD_PB1176,
+	REALVIEW_CLCD_PB11MP,
+	REALVIEW_CLCD_PBA8,
+	REALVIEW_CLCD_PBX,
+};
+
+static const struct of_device_id versatile_clcd_of_match[] = {
+	{
+		.compatible = "arm,core-module-integrator",
+		.data = (void *)INTEGRATOR_CLCD_CM,
+	},
+	{
+		.compatible = "arm,versatile-sysreg",
+		.data = (void *)VERSATILE_CLCD,
+	},
+	{
+		.compatible = "arm,realview-eb-syscon",
+		.data = (void *)REALVIEW_CLCD_EB,
+	},
+	{
+		.compatible = "arm,realview-pb1176-syscon",
+		.data = (void *)REALVIEW_CLCD_PB1176,
+	},
+	{
+		.compatible = "arm,realview-pb11mp-syscon",
+		.data = (void *)REALVIEW_CLCD_PB11MP,
+	},
+	{
+		.compatible = "arm,realview-pba8-syscon",
+		.data = (void *)REALVIEW_CLCD_PBA8,
+	},
+	{
+		.compatible = "arm,realview-pbx-syscon",
+		.data = (void *)REALVIEW_CLCD_PBX,
+	},
+	{},
+};
+
+/*
+ * Core module CLCD control on the Integrator/CP, bits
+ * 8 thru 19 of the CM_CONTROL register controls a bunch
+ * of CLCD settings.
+ */
+#define INTEGRATOR_HDR_CTRL_OFFSET	0x0C
+#define INTEGRATOR_CLCD_LCDBIASEN	BIT(8)
+#define INTEGRATOR_CLCD_LCDBIASUP	BIT(9)
+#define INTEGRATOR_CLCD_LCDBIASDN	BIT(10)
+/* Bits 11,12,13 controls the LCD type */
+#define INTEGRATOR_CLCD_LCDMUX_MASK	(BIT(11)|BIT(12)|BIT(13))
+#define INTEGRATOR_CLCD_LCDMUX_LCD24	BIT(11)
+#define INTEGRATOR_CLCD_LCDMUX_VGA565	BIT(12)
+#define INTEGRATOR_CLCD_LCDMUX_SHARP	(BIT(11)|BIT(12))
+#define INTEGRATOR_CLCD_LCDMUX_VGA555	BIT(13)
+#define INTEGRATOR_CLCD_LCDMUX_VGA24	(BIT(11)|BIT(12)|BIT(13))
+#define INTEGRATOR_CLCD_LCD0_EN		BIT(14)
+#define INTEGRATOR_CLCD_LCD1_EN		BIT(15)
+/* R/L flip on Sharp */
+#define INTEGRATOR_CLCD_LCD_STATIC1	BIT(16)
+/* U/D flip on Sharp */
+#define INTEGRATOR_CLCD_LCD_STATIC2	BIT(17)
+/* No connection on Sharp */
+#define INTEGRATOR_CLCD_LCD_STATIC	BIT(18)
+/* 0 = 24bit VGA, 1 = 18bit VGA */
+#define INTEGRATOR_CLCD_LCD_N24BITEN	BIT(19)
+
+#define INTEGRATOR_CLCD_MASK		(INTEGRATOR_CLCD_LCDBIASEN | \
+					 INTEGRATOR_CLCD_LCDBIASUP | \
+					 INTEGRATOR_CLCD_LCDBIASDN | \
+					 INTEGRATOR_CLCD_LCDMUX_MASK | \
+					 INTEGRATOR_CLCD_LCD0_EN | \
+					 INTEGRATOR_CLCD_LCD1_EN | \
+					 INTEGRATOR_CLCD_LCD_STATIC1 | \
+					 INTEGRATOR_CLCD_LCD_STATIC2 | \
+					 INTEGRATOR_CLCD_LCD_STATIC | \
+					 INTEGRATOR_CLCD_LCD_N24BITEN)
+
+static void pl111_integrator_enable(struct drm_device *drm, u32 format)
+{
+	u32 val;
+
+	dev_info(drm->dev, "enable Integrator CLCD connectors\n");
+
+	/* FIXME: really needed? */
+	val = INTEGRATOR_CLCD_LCD_STATIC1 | INTEGRATOR_CLCD_LCD_STATIC2 |
+		INTEGRATOR_CLCD_LCD0_EN | INTEGRATOR_CLCD_LCD1_EN;
+
+	switch (format) {
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_XRGB8888:
+		break;
+	case DRM_FORMAT_BGR565:
+	case DRM_FORMAT_RGB565:
+		/* truecolor RGB565 */
+		val |= INTEGRATOR_CLCD_LCDMUX_VGA565;
+		break;
+	case DRM_FORMAT_XBGR1555:
+	case DRM_FORMAT_XRGB1555:
+		/* Pseudocolor, RGB555, BGR555 */
+		val |= INTEGRATOR_CLCD_LCDMUX_VGA555;
+		break;
+	default:
+		dev_err(drm->dev, "unhandled format on Integrator 0x%08x\n",
+			format);
+		break;
+	}
+
+	regmap_update_bits(versatile_syscon_map,
+			   INTEGRATOR_HDR_CTRL_OFFSET,
+			   INTEGRATOR_CLCD_MASK,
+			   val);
+}
+
+/*
+ * This configuration register in the Versatile and RealView
+ * family is uniformly present but appears more and more
+ * unutilized starting with the RealView series.
+ */
+#define SYS_CLCD			0x50
+#define SYS_CLCD_MODE_MASK		(BIT(0)|BIT(1))
+#define SYS_CLCD_MODE_888		0
+#define SYS_CLCD_MODE_5551		BIT(0)
+#define SYS_CLCD_MODE_565_R_LSB		BIT(1)
+#define SYS_CLCD_MODE_565_B_LSB		(BIT(0)|BIT(1))
+#define SYS_CLCD_CONNECTOR_MASK		(BIT(2)|BIT(3)|BIT(4)|BIT(5))
+#define SYS_CLCD_NLCDIOON		BIT(2)
+#define SYS_CLCD_VDDPOSSWITCH		BIT(3)
+#define SYS_CLCD_PWR3V5SWITCH		BIT(4)
+#define SYS_CLCD_VDDNEGSWITCH		BIT(5)
+
+static void pl111_versatile_disable(struct drm_device *drm)
+{
+	dev_info(drm->dev, "disable Versatile CLCD connectors\n");
+	regmap_update_bits(versatile_syscon_map,
+			   SYS_CLCD,
+			   SYS_CLCD_CONNECTOR_MASK,
+			   0);
+}
+
+static void pl111_versatile_enable(struct drm_device *drm, u32 format)
+{
+	u32 val = 0;
+
+	dev_info(drm->dev, "enable Versatile CLCD connectors\n");
+
+	switch (format) {
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XRGB8888:
+		val |= SYS_CLCD_MODE_888;
+		break;
+	case DRM_FORMAT_BGR565:
+		val |= SYS_CLCD_MODE_565_R_LSB;
+		break;
+	case DRM_FORMAT_RGB565:
+		val |= SYS_CLCD_MODE_565_B_LSB;
+		break;
+	case DRM_FORMAT_ABGR1555:
+	case DRM_FORMAT_XBGR1555:
+	case DRM_FORMAT_ARGB1555:
+	case DRM_FORMAT_XRGB1555:
+		val |= SYS_CLCD_MODE_5551;
+		break;
+	default:
+		dev_err(drm->dev, "unhandled format on Versatile 0x%08x\n",
+			format);
+		break;
+	}
+
+	/* Set up the MUX */
+	regmap_update_bits(versatile_syscon_map,
+			   SYS_CLCD,
+			   SYS_CLCD_MODE_MASK,
+			   val);
+
+	/* Then enable the display */
+	regmap_update_bits(versatile_syscon_map,
+			   SYS_CLCD,
+			   SYS_CLCD_CONNECTOR_MASK,
+			   SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH);
+}
+
+static void pl111_realview_clcd_disable(struct drm_device *drm)
+{
+	dev_info(drm->dev, "disable RealView CLCD connectors\n");
+	regmap_update_bits(versatile_syscon_map,
+			   SYS_CLCD,
+			   SYS_CLCD_CONNECTOR_MASK,
+			   0);
+}
+
+static void pl111_realview_clcd_enable(struct drm_device *drm, u32 format)
+{
+	dev_info(drm->dev, "enable RealView CLCD connectors\n");
+	regmap_update_bits(versatile_syscon_map,
+			   SYS_CLCD,
+			   SYS_CLCD_CONNECTOR_MASK,
+			   SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH);
+}
+
+int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
+{
+	const struct of_device_id *clcd_id;
+	enum versatile_clcd versatile_clcd_type;
+	struct device_node *np;
+	struct regmap *map;
+
+	np = of_find_matching_node_and_match(NULL, versatile_clcd_of_match,
+					     &clcd_id);
+	if (!np) {
+		/* Non-ARM reference designs, just bail out */
+		return 0;
+	}
+	versatile_clcd_type = (enum versatile_clcd)clcd_id->data;
+
+	map = syscon_node_to_regmap(np);
+	if (IS_ERR(map)) {
+		dev_err(dev, "no Versatile syscon regmap\n");
+		return PTR_ERR(map);
+	}
+
+	switch (versatile_clcd_type) {
+	case INTEGRATOR_CLCD_CM:
+		versatile_syscon_map = map;
+		priv->variant_display_enable = pl111_integrator_enable;
+		dev_info(dev, "set up callbacks for Integrator PL110\n");
+		break;
+	case VERSATILE_CLCD:
+		versatile_syscon_map = map;
+		priv->variant_display_enable = pl111_versatile_enable;
+		priv->variant_display_disable = pl111_versatile_disable;
+		dev_info(dev, "set up callbacks for Versatile PL110+\n");
+		break;
+	case REALVIEW_CLCD_EB:
+	case REALVIEW_CLCD_PB1176:
+	case REALVIEW_CLCD_PB11MP:
+	case REALVIEW_CLCD_PBA8:
+	case REALVIEW_CLCD_PBX:
+		versatile_syscon_map = map;
+		priv->variant_display_enable = pl111_realview_clcd_enable;
+		priv->variant_display_disable = pl111_realview_clcd_disable;
+		dev_info(dev, "set up callbacks for RealView PL111\n");
+		break;
+	default:
+		dev_info(dev, "unknown Versatile system controller\n");
+		break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pl111_versatile_init);
diff --git a/drivers/gpu/drm/pl111/pl111_versatile.h b/drivers/gpu/drm/pl111/pl111_versatile.h
new file mode 100644
index 000000000000..41aa6d969dc6
--- /dev/null
+++ b/drivers/gpu/drm/pl111/pl111_versatile.h
@@ -0,0 +1,9 @@
+#include <linux/device.h>
+#include "pl111_drm.h"
+
+#ifndef PL111_VERSATILE_H
+#define PL111_VERSATILE_H
+
+int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv);
+
+#endif
-- 
2.13.5

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux