Fall back to polling the connector for connect and disconnect events when no interrupt is specified. Otherwise these events will not be noticed and monitor hotplug does not work. Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx> --- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 94d598d8aedf..bd7dbae1119e 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -829,7 +829,11 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge) return -ENODEV; } - adv->connector.polled = DRM_CONNECTOR_POLL_HPD; + if (adv->i2c_main->irq) + adv->connector.polled = DRM_CONNECTOR_POLL_HPD; + else + adv->connector.polled = DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT; ret = drm_connector_init(bridge->dev, &adv->connector, &adv7511_connector_funcs, -- 2.11.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
