On Thu, Aug 31, 2017 at 1:01 PM, Hans Verkuil <hverkuil@xxxxxxxxx> wrote: > From: Hans Verkuil <hans.verkuil@xxxxxxxxx> > > Add a simple HDMI CEC GPIO driver that sits on top of the cec-pin framework. > > While I have heard of SoCs that use the GPIO pin for CEC (apparently an > early RockChip SoC used that), the main use-case of this driver is to > function as a debugging tool. > > By connecting the CEC line to a GPIO pin on a Raspberry Pi 3 for example > it turns it into a CEC debugger and protocol analyzer. > > With 'cec-ctl --monitor-pin' the CEC traffic can be analyzed. > > But of course it can also be used with any hardware project where the > HDMI CEC line is hooked up to a pull-up gpio line. > > In addition this has (optional) support for tracing HPD changes if the > HPD is connected to a GPIO. > > Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx> This looks nice! Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Yours, Linus Walleij _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
