Re: [PATCH v4] drm/bridge/sii8620: add remote control support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Em Thu, 24 Aug 2017 10:58:07 +0200
Maciej Purski <m.purski@xxxxxxxxxxx> escreveu:

> MHL specification defines Remote Control Protocol(RCP) to
> send input events between MHL devices.
> The driver now recognizes RCP messages and reacts to them
> by reporting key events to input subsystem, allowing
> a user to control a device using TV remote control.
> 
> Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx>

Acked-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>


> ---
> 
> Changes in v2:
> - use RC subsystem (including CEC keymap)
> - RC device initialized in attach drm_bridge callback and
>   removed in detach callback. This is necessary, because RC_CORE,
>   which is needed during rc_dev init, is loaded after sii8620.
>   DRM bridge is binded later which solves the problem.
> - add RC_CORE dependency
> 
> Changes in v3:
> - fix error handling in init_rcp and in attach callback
> 
> Changes in v4:
> - usage of rc-core API compatible with upcoming changes
> - fix error handling in init_rcp
> - fix commit message
> ---
>  drivers/gpu/drm/bridge/Kconfig       |  2 +-
>  drivers/gpu/drm/bridge/sil-sii8620.c | 96 ++++++++++++++++++++++++++++++++++--
>  include/drm/bridge/mhl.h             |  4 ++
>  3 files changed, 96 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index adf9ae0..6ef901c 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -71,7 +71,7 @@ config DRM_PARADE_PS8622
>  
>  config DRM_SIL_SII8620
>  	tristate "Silicon Image SII8620 HDMI/MHL bridge"
> -	depends on OF
> +	depends on OF && RC_CORE
>  	select DRM_KMS_HELPER
>  	help
>  	  Silicon Image SII8620 HDMI/MHL bridge chip driver.
> diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c
> index 2d51a22..ecb26c4 100644
> --- a/drivers/gpu/drm/bridge/sil-sii8620.c
> +++ b/drivers/gpu/drm/bridge/sil-sii8620.c
> @@ -28,6 +28,8 @@
>  #include <linux/regulator/consumer.h>
>  #include <linux/slab.h>
>  
> +#include <media/rc-core.h>
> +
>  #include "sil-sii8620.h"
>  
>  #define SII8620_BURST_BUF_LEN 288
> @@ -58,6 +60,7 @@ enum sii8620_mt_state {
>  struct sii8620 {
>  	struct drm_bridge bridge;
>  	struct device *dev;
> +	struct rc_dev *rc_dev;
>  	struct clk *clk_xtal;
>  	struct gpio_desc *gpio_reset;
>  	struct gpio_desc *gpio_int;
> @@ -431,6 +434,16 @@ static void sii8620_mt_rap(struct sii8620 *ctx, u8 code)
>  	sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RAP, code);
>  }
>  
> +static void sii8620_mt_rcpk(struct sii8620 *ctx, u8 code)
> +{
> +	sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RCPK, code);
> +}
> +
> +static void sii8620_mt_rcpe(struct sii8620 *ctx, u8 code)
> +{
> +	sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RCPE, code);
> +}
> +
>  static void sii8620_mt_read_devcap_send(struct sii8620 *ctx,
>  					struct sii8620_mt_msg *msg)
>  {
> @@ -1753,6 +1766,25 @@ static void sii8620_send_features(struct sii8620 *ctx)
>  	sii8620_write_buf(ctx, REG_MDT_XMIT_WRITE_PORT, buf, ARRAY_SIZE(buf));
>  }
>  
> +static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 scancode)
> +{
> +	bool pressed = !(scancode & MHL_RCP_KEY_RELEASED_MASK);
> +
> +	scancode &= MHL_RCP_KEY_ID_MASK;
> +
> +	if (!ctx->rc_dev) {
> +		dev_dbg(ctx->dev, "RCP input device not initialized\n");
> +		return false;
> +	}
> +
> +	if (pressed)
> +		rc_keydown(ctx->rc_dev, RC_PROTO_CEC, scancode, 0);
> +	else
> +		rc_keyup(ctx->rc_dev);
> +
> +	return true;
> +}
> +
>  static void sii8620_msc_mr_set_int(struct sii8620 *ctx)
>  {
>  	u8 ints[MHL_INT_SIZE];
> @@ -1804,19 +1836,25 @@ static void sii8620_msc_mt_done(struct sii8620 *ctx)
>  
>  static void sii8620_msc_mr_msc_msg(struct sii8620 *ctx)
>  {
> -	struct sii8620_mt_msg *msg = sii8620_msc_msg_first(ctx);
> +	struct sii8620_mt_msg *msg;
>  	u8 buf[2];
>  
> -	if (!msg)
> -		return;
> -
>  	sii8620_read_buf(ctx, REG_MSC_MR_MSC_MSG_RCVD_1ST_DATA, buf, 2);
>  
>  	switch (buf[0]) {
>  	case MHL_MSC_MSG_RAPK:
> +		msg = sii8620_msc_msg_first(ctx);
> +		if (!msg)
> +			return;
>  		msg->ret = buf[1];
>  		ctx->mt_state = MT_STATE_DONE;
>  		break;
> +	case MHL_MSC_MSG_RCP:
> +		if (!sii8620_rcp_consume(ctx, buf[1]))
> +			sii8620_mt_rcpe(ctx,
> +					MHL_RCPE_STATUS_INEFFECTIVE_KEY_CODE);
> +		sii8620_mt_rcpk(ctx, buf[1]);
> +		break;
>  	default:
>  		dev_err(ctx->dev, "%s message type %d,%d not supported",
>  			__func__, buf[0], buf[1]);
> @@ -2102,11 +2140,57 @@ static void sii8620_cable_in(struct sii8620 *ctx)
>  	enable_irq(to_i2c_client(ctx->dev)->irq);
>  }
>  
> +static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
> +{
> +	struct rc_dev *rc_dev;
> +	int ret;
> +
> +	rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE);
> +	if (!rc_dev) {
> +		dev_err(ctx->dev, "Failed to allocate RC device\n");
> +		ctx->error = -ENOMEM;
> +		return;
> +	}
> +
> +	rc_dev->input_phys = "sii8620/input0";
> +	rc_dev->input_id.bustype = BUS_VIRTUAL;
> +	rc_dev->map_name = RC_MAP_CEC;
> +	rc_dev->allowed_protocols = RC_PROTO_BIT_CEC;
> +	rc_dev->driver_name = "sii8620";
> +	rc_dev->device_name = "sii8620";
> +
> +	ret = rc_register_device(rc_dev);
> +
> +	if (ret) {
> +		dev_err(ctx->dev, "Failed to register RC device\n");
> +		ctx->error = ret;
> +		rc_free_device(ctx->rc_dev);
> +		return;
> +	}
> +	ctx->rc_dev = rc_dev;
> +}
> +
>  static inline struct sii8620 *bridge_to_sii8620(struct drm_bridge *bridge)
>  {
>  	return container_of(bridge, struct sii8620, bridge);
>  }
>  
> +static int sii8620_attach(struct drm_bridge *bridge)
> +{
> +	struct sii8620 *ctx = bridge_to_sii8620(bridge);
> +
> +	sii8620_init_rcp_input_dev(ctx);
> +
> +	return sii8620_clear_error(ctx);
> +}
> +
> +static void sii8620_detach(struct drm_bridge *bridge)
> +{
> +	struct sii8620 *ctx = bridge_to_sii8620(bridge);
> +
> +	rc_unregister_device(ctx->rc_dev);
> +}
> +
>  static bool sii8620_mode_fixup(struct drm_bridge *bridge,
>  			       const struct drm_display_mode *mode,
>  			       struct drm_display_mode *adjusted_mode)
> @@ -2151,6 +2235,8 @@ static bool sii8620_mode_fixup(struct drm_bridge *bridge,
>  }
>  
>  static const struct drm_bridge_funcs sii8620_bridge_funcs = {
> +	.attach = sii8620_attach,
> +	.detach = sii8620_detach,
>  	.mode_fixup = sii8620_mode_fixup,
>  };
>  
> @@ -2217,8 +2303,8 @@ static int sii8620_remove(struct i2c_client *client)
>  	struct sii8620 *ctx = i2c_get_clientdata(client);
>  
>  	disable_irq(to_i2c_client(ctx->dev)->irq);
> -	drm_bridge_remove(&ctx->bridge);
>  	sii8620_hw_off(ctx);
> +	drm_bridge_remove(&ctx->bridge);
>  
>  	return 0;
>  }
> diff --git a/include/drm/bridge/mhl.h b/include/drm/bridge/mhl.h
> index fbdfc8d..96a5e0f 100644
> --- a/include/drm/bridge/mhl.h
> +++ b/include/drm/bridge/mhl.h
> @@ -262,6 +262,10 @@ enum {
>  #define MHL_RAPK_UNSUPPORTED	0x02	/* Rcvd RAP action code not supported */
>  #define MHL_RAPK_BUSY		0x03	/* Responder too busy to respond */
>  
> +/* Bit masks for RCP messages */
> +#define MHL_RCP_KEY_RELEASED_MASK	0x80
> +#define MHL_RCP_KEY_ID_MASK		0x7F
> +
>  /*
>   * Error status codes for RCPE messages
>   */



Thanks,
Mauro
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux