On 19.08.2017 13:35, Mikko Perttunen wrote: > On 08/19/2017 01:09 PM, Dmitry Osipenko wrote: >> On 19.08.2017 11:10, Mikko Perttunen wrote: >> [snip] >>>>> + host1x_hw_syncpt_set_protection(host, true); >>>> >>>> Is it really okay to force the protection? Maybe protection should be enabled >>>> with a respect to CONFIG_TEGRA_HOST1X_FIREWALL? In that case we would have to >>>> avoid software jobs validation for Tegra124+. >>> >>> I don't quite get your comment. The hardware syncpt protection layer being >>> enabled should never hurt - it doesn't mess with any valid jobs. It's also only >>> on Tegra186 so I'm not sure where the Tegra124 comes from. >> >> Right, it's the gather filter on T124+, my bad. This raises several questions. >> >> 1) Why we have CONFIG_TEGRA_HOST1X_FIREWALL? Should it be always enforced or we >> actually want to be a bit more flexible and allow to disable it. Imagine that >> you are making a custom application and want to utilize channels in a >> different way. > > I think it should be up to the user to decide whether they want the firewall or > not. It's clearly the most useful on the older chips - especially Tegra20 due to > lack of IOMMU. The performance penalty is too great to force it on always. > Of course there is some overhead but is not that great. Usually command buffer contains just a dozen of commands. It should be an interesting challenge to optimize its performance though. > The programming model should always be considered the same - the rules of what > you are allowed to do are the same whether the firewall, or any > hardware-implemented protection features, are on or not. > Well, okay. >> >> 2) Since syncpoint protection is a T186 feature, what about previous >> generations? Should we validate syncpoints in software for them? We have >> 'syncpoint validation' patch staged in grate's kernel >> https://github.com/grate-driver/linux/commit/c8b6c82173f2ee9fead23380e8330b8099e7d5e7 >> >> (I'll start sending out this and other patches after a bit more thorough >> testing.) Improperly used syncpoints potentially could allow one program to >> damage others. > > Yes, I think the firewall should have this feature for older generations. We > could disable the check on Tegra186, as you point towards in question 4. > >> >> 3) What exactly does gather filter? Could you list all the commands that it >> filters out, please? > > According to the Tegra186 TRM (section 16.8.32), SETCLASS, SETSTRMID and EXTEND > are filtered. > Okay, then what about SETSTRMID command, I don't see its disassembly in the host1x gather debug dump. Is it accidentally missed? >> >> 4) What about T30/T114 that do not have gather filter? Should we validate those >> commands for them in a software firewall? > > Yes, the firewall should validate that. > >> >> So maybe we should implement several layers of validation in the SW firewall. >> Like all layers for T20 (memory boundaries validation etc), software gather >> filter for T30/114 and software syncpoint validation for T30/114/124/210. >> > > That seems like a good idea. Alright, factoring out firewall from job.c probably should be the first step. -- Dmitry _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
