On 03.08.2017 10:28, Hans Verkuil wrote: > Hi Maciej, > > Unfortunately I do not have the MHL spec, but I was wondering what the > relationship between RCP and CEC is. CEC has remote control support as > well, so is RCP that subset of the CEC specification or is it completely > separate? We also do not have MHL specs. From my research it looks like MHL consortium was mainly focused on supporting different input devices - remote control, mice, keyboard, touchscreen, game controller, etc. In public data sheets of some chips Lattice/Silicon Image (main MHL chip producer) suggest they do not support CEC pass-through via MHL[1]. On the other side superMHL extends RCP with support for multiple devices [2], so for me it looks like RCP wants to be an alternative to CEC. But all this is just my interpretation of info found on the Net. [1]: http://www.latticesemi.com/~/media/LatticeSemi/Documents/DataSheets/ASSP/SiI-DS-1128_Public.pdf?document_id=51627 [2]: https://en.wikipedia.org/wiki/Mobile_High-Definition_Link#superMHL Regards Andrzej > > I'm CC-ing Sean Young and the linux-media mailinglist as well since Sean > maintains the rc subsystem. Which you probably should use, but I'm not the > expert on that. > > Regards, > > Hans > > On 08/03/17 09:44, Maciej Purski wrote: >> MHL specification defines Remote Control Protocol(RCP) to >> send input events between MHL devices. >> The driver now recognizes RCP messages and reacts to them >> by reporting key events to input subsystem, allowing >> a user to control a device using TV remote control. >> >> Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx> >> --- >> drivers/gpu/drm/bridge/sil-sii8620.c | 188 ++++++++++++++++++++++++++++++++++- >> include/drm/bridge/mhl.h | 4 + >> 2 files changed, 187 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c >> index 2d51a22..7e75f2f 100644 >> --- a/drivers/gpu/drm/bridge/sil-sii8620.c >> +++ b/drivers/gpu/drm/bridge/sil-sii8620.c >> @@ -19,6 +19,7 @@ >> #include <linux/delay.h> >> #include <linux/gpio/consumer.h> >> #include <linux/i2c.h> >> +#include <linux/input.h> >> #include <linux/interrupt.h> >> #include <linux/irq.h> >> #include <linux/kernel.h> >> @@ -58,6 +59,7 @@ enum sii8620_mt_state { >> struct sii8620 { >> struct drm_bridge bridge; >> struct device *dev; >> + struct input_dev *rcp_input_dev; >> struct clk *clk_xtal; >> struct gpio_desc *gpio_reset; >> struct gpio_desc *gpio_int; >> @@ -106,6 +108,82 @@ struct sii8620_mt_msg { >> sii8620_cb continuation; >> }; >> >> +static struct { >> + u16 key; >> + u16 extra_key; >> + bool autorepeat; >> +} rcp_keymap[] = { >> + [0x00] = { KEY_SELECT }, >> + [0x01] = { KEY_UP, 0, true }, >> + [0x02] = { KEY_DOWN, 0, true }, >> + [0x03] = { KEY_LEFT, 0, true }, >> + [0x04] = { KEY_RIGHT, 0, true }, >> + >> + [0x05] = { KEY_RIGHT, KEY_UP, true }, >> + [0x06] = { KEY_RIGHT, KEY_DOWN, true }, >> + [0x07] = { KEY_LEFT, KEY_UP, true }, >> + [0x08] = { KEY_LEFT, KEY_DOWN, true }, >> + >> + [0x09] = { KEY_MENU }, >> + [0x0A] = { KEY_UNKNOWN }, >> + [0x0B] = { KEY_UNKNOWN }, >> + [0x0C] = { KEY_BOOKMARKS }, >> + [0x0D] = { KEY_EXIT }, >> + >> + [0x20] = { KEY_NUMERIC_0 }, >> + [0x21] = { KEY_NUMERIC_1 }, >> + [0x22] = { KEY_NUMERIC_2 }, >> + [0x23] = { KEY_NUMERIC_3 }, >> + [0x24] = { KEY_NUMERIC_4 }, >> + [0x25] = { KEY_NUMERIC_5 }, >> + [0x26] = { KEY_NUMERIC_6 }, >> + [0x27] = { KEY_NUMERIC_7 }, >> + [0x28] = { KEY_NUMERIC_8 }, >> + [0x29] = { KEY_NUMERIC_9 }, >> + >> + [0x2A] = { KEY_DOT }, >> + [0x2B] = { KEY_ENTER }, >> + [0x2C] = { KEY_CLEAR }, >> + >> + [0x30] = { KEY_CHANNELUP, 0, true }, >> + [0x31] = { KEY_CHANNELDOWN, 0, true }, >> + >> + [0x33] = { KEY_SOUND }, >> + [0x35] = { KEY_PROGRAM }, /* Show Information */ >> + >> + [0x37] = { KEY_PAGEUP, 0, true }, >> + [0x38] = { KEY_PAGEDOWN, 0, true }, >> + >> + [0x41] = { KEY_VOLUMEUP, 0, true }, >> + [0x42] = { KEY_VOLUMEDOWN, 0, true }, >> + [0x43] = { KEY_MUTE }, >> + [0x44] = { KEY_PLAY }, >> + [0x45] = { KEY_STOP }, >> + [0x46] = { KEY_PLAYPAUSE }, /* Pause */ >> + [0x47] = { KEY_RECORD }, >> + [0x48] = { KEY_REWIND, 0, true }, >> + [0x49] = { KEY_FASTFORWARD, 0, true }, >> + [0x4A] = { KEY_EJECTCD }, >> + [0x4B] = { KEY_NEXTSONG, 0, true }, /* Forward */ >> + [0x4C] = { KEY_PREVIOUSSONG, 0, true }, /* Backward */ >> + >> + [0x60] = { KEY_PLAYPAUSE }, /* Play */ >> + [0x61] = { KEY_PLAYPAUSE }, /* Pause the Play */ >> + [0x62] = { KEY_RECORD }, >> + [0x63] = { KEY_PAUSE }, >> + [0x64] = { KEY_STOP }, >> + [0x65] = { KEY_MUTE }, >> + [0x66] = { KEY_MUTE }, /* Restore Mute */ >> + >> + [0x71] = { KEY_F1 }, >> + [0x72] = { KEY_F2 }, >> + [0x73] = { KEY_F3 }, >> + [0x74] = { KEY_F4 }, >> + [0x75] = { KEY_F5 }, >> + >> + [0x7E] = { KEY_VENDOR }, >> +}; >> + >> static const u8 sii8620_i2c_page[] = { >> 0x39, /* Main System */ >> 0x3d, /* TDM and HSIC */ >> @@ -431,6 +509,16 @@ static void sii8620_mt_rap(struct sii8620 *ctx, u8 code) >> sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RAP, code); >> } >> >> +static void sii8620_mt_rcpk(struct sii8620 *ctx, u8 code) >> +{ >> + sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RCPK, code); >> +} >> + >> +static void sii8620_mt_rcpe(struct sii8620 *ctx, u8 code) >> +{ >> + sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RCPE, code); >> +} >> + >> static void sii8620_mt_read_devcap_send(struct sii8620 *ctx, >> struct sii8620_mt_msg *msg) >> { >> @@ -1753,6 +1841,43 @@ static void sii8620_send_features(struct sii8620 *ctx) >> sii8620_write_buf(ctx, REG_MDT_XMIT_WRITE_PORT, buf, ARRAY_SIZE(buf)); >> } >> >> +static void sii8620_rcp_report_key(struct sii8620 *ctx, u8 keycode, bool pressed) >> +{ >> + input_report_key(ctx->rcp_input_dev, >> + rcp_keymap[keycode].key, pressed); >> + >> + if (rcp_keymap[keycode].extra_key) >> + input_report_key(ctx->rcp_input_dev, >> + rcp_keymap[keycode].extra_key, pressed); >> +} >> + >> +static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 keycode) >> +{ >> + bool pressed = !(keycode & MHL_RCP_KEY_RELEASED_MASK); >> + >> + if (!ctx->rcp_input_dev) { >> + dev_dbg(ctx->dev, "RCP input device not initialized\n"); >> + return false; >> + } >> + >> + keycode &= MHL_RCP_KEY_ID_MASK; >> + if (keycode >= ARRAY_SIZE(rcp_keymap) || !rcp_keymap[keycode].key) { >> + dev_dbg(ctx->dev, "Unsupported RCP key code: %d\n", keycode); >> + return false; >> + } >> + >> + if (rcp_keymap[keycode].autorepeat && pressed) { >> + sii8620_rcp_report_key(ctx, keycode, true); >> + sii8620_rcp_report_key(ctx, keycode, false); >> + } else if (!rcp_keymap[keycode].autorepeat) { >> + sii8620_rcp_report_key(ctx, keycode, pressed); >> + } >> + >> + input_sync(ctx->rcp_input_dev); >> + >> + return true; >> +} >> + >> static void sii8620_msc_mr_set_int(struct sii8620 *ctx) >> { >> u8 ints[MHL_INT_SIZE]; >> @@ -1804,19 +1929,25 @@ static void sii8620_msc_mt_done(struct sii8620 *ctx) >> >> static void sii8620_msc_mr_msc_msg(struct sii8620 *ctx) >> { >> - struct sii8620_mt_msg *msg = sii8620_msc_msg_first(ctx); >> + struct sii8620_mt_msg *msg; >> u8 buf[2]; >> >> - if (!msg) >> - return; >> - >> sii8620_read_buf(ctx, REG_MSC_MR_MSC_MSG_RCVD_1ST_DATA, buf, 2); >> >> switch (buf[0]) { >> case MHL_MSC_MSG_RAPK: >> + msg = sii8620_msc_msg_first(ctx); >> + if (!msg) >> + return; >> msg->ret = buf[1]; >> ctx->mt_state = MT_STATE_DONE; >> break; >> + case MHL_MSC_MSG_RCP: >> + if (!sii8620_rcp_consume(ctx, buf[1])) >> + sii8620_mt_rcpe(ctx, >> + MHL_RCPE_STATUS_INEFFECTIVE_KEY_CODE); >> + sii8620_mt_rcpk(ctx, buf[1]); >> + break; >> default: >> dev_err(ctx->dev, "%s message type %d,%d not supported", >> __func__, buf[0], buf[1]); >> @@ -2102,6 +2233,51 @@ static void sii8620_cable_in(struct sii8620 *ctx) >> enable_irq(to_i2c_client(ctx->dev)->irq); >> } >> >> +static void sii8620_init_rcp_input_dev(struct sii8620 *ctx) >> +{ >> + struct input_dev *i_dev = input_allocate_device(); >> + int ret, i; >> + u16 keycode; >> + >> + if (!i_dev) { >> + dev_err(ctx->dev, "Failed to allocate RCP input device\n"); >> + ctx->error = -ENOMEM; >> + } >> + >> + set_bit(EV_KEY, i_dev->evbit); >> + i_dev->name = "MHL Remote Control"; >> + i_dev->keycode = rcp_keymap; >> + i_dev->keycodesize = sizeof(u16); >> + i_dev->keycodemax = ARRAY_SIZE(rcp_keymap); >> + >> + for (i = 0; i < ARRAY_SIZE(rcp_keymap); i++) { >> + keycode = rcp_keymap[i].key; >> + if (keycode) >> + __set_bit(keycode, i_dev->keybit); >> + } >> + >> + i_dev->id.bustype = BUS_VIRTUAL; >> + ret = input_register_device(i_dev); >> + >> + if (ret) { >> + dev_err(ctx->dev, "Failed to register rcp input device\n"); >> + input_free_device(i_dev); >> + ctx->error = ret; >> + } >> + >> + ctx->rcp_input_dev = i_dev; >> +} >> + >> +static void sii8620_remove_rcp_input_dev(struct sii8620 *ctx) >> +{ >> + if (!ctx->rcp_input_dev) >> + return; >> + >> + input_unregister_device(ctx->rcp_input_dev); >> + input_free_device(ctx->rcp_input_dev); >> + ctx->rcp_input_dev = NULL; >> +} >> + >> static inline struct sii8620 *bridge_to_sii8620(struct drm_bridge *bridge) >> { >> return container_of(bridge, struct sii8620, bridge); >> @@ -2207,6 +2383,7 @@ static int sii8620_probe(struct i2c_client *client, >> ctx->bridge.of_node = dev->of_node; >> drm_bridge_add(&ctx->bridge); >> >> + sii8620_init_rcp_input_dev(ctx); >> sii8620_cable_in(ctx); >> >> return 0; >> @@ -2217,8 +2394,9 @@ static int sii8620_remove(struct i2c_client *client) >> struct sii8620 *ctx = i2c_get_clientdata(client); >> >> disable_irq(to_i2c_client(ctx->dev)->irq); >> - drm_bridge_remove(&ctx->bridge); >> sii8620_hw_off(ctx); >> + sii8620_remove_rcp_input_dev(ctx); >> + drm_bridge_remove(&ctx->bridge); >> >> return 0; >> } >> diff --git a/include/drm/bridge/mhl.h b/include/drm/bridge/mhl.h >> index fbdfc8d..96a5e0f 100644 >> --- a/include/drm/bridge/mhl.h >> +++ b/include/drm/bridge/mhl.h >> @@ -262,6 +262,10 @@ enum { >> #define MHL_RAPK_UNSUPPORTED 0x02 /* Rcvd RAP action code not supported */ >> #define MHL_RAPK_BUSY 0x03 /* Responder too busy to respond */ >> >> +/* Bit masks for RCP messages */ >> +#define MHL_RCP_KEY_RELEASED_MASK 0x80 >> +#define MHL_RCP_KEY_ID_MASK 0x7F >> + >> /* >> * Error status codes for RCPE messages >> */ >> > > > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
