CEC support was added for Exynos5 in 4.13, but for the Odroids we need to set 'needs-hpd' as well since CEC is disabled when there is no HDMI hotplug signal, just as for the exynos4 Odroid-U3. This is due to the level-shifter that is disabled when there is no HPD, thus blocking the CEC signal as well. Same close-but-no-cigar board design as the Odroid-U3. Tested with my Odroid XU4. Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx> --- diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index f92f95741207..a183b56283f8 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -266,6 +266,7 @@ &hdmicec { status = "okay"; + needs-hpd; }; &hsi2c_4 { _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel