On 07/18/2017 09:57 AM, Archit Taneja wrote: > > Hi, > > On 07/17/2017 01:10 PM, Philippe CORNU wrote: >> Version 6: >> - bridge/synopsys/dw-mipi-dsi.c: drm_bridge_add update (Archit Taneja) > > queued patches #1 to #4 to drm-misc-next. Please let me know when you apply > the remainder of the ST patches. Once that's done, we can add > CONFIG_DRM_STM_DSI=y > in the drm-misc defconfigs for arm/arm64. > > Thanks, > Archit > Hi Archit & Many thanks. Benjamin integrated the last 3 patches + its last fix "drm: stm: remove "default y" in Kconfig". So you should add CONFIG_DRM_STM=y too. I take the opportunity to thank you for your great support, I learned so much from you and from drm & kernel communities : ) *BIG THANK YOU* to all of you, Philippe >> >> Version 5: >> - bridge/synopsys/dw-mipi-dsi.c: Improve the direct call to panel >> bridge post_disable() & related comments (Archit Taneja) >> - stm/ltdc.c: fix leak of pixel clock enable in some error >> paths (Eric Anholt) >> - bindings/display/bridge/dw_mipi_dsi.txt: add pixel clock & remove >> "driver" (Rob Herring, Archit Taneja) >> - bindings/display/st,stm32-ltdc.txt: remove "driver" (Rob Herring, >> Archit Taneja) >> >> Version 4: >> - bridge/synopsys/dw-mipi-dsi.c: Add panel-bridge support (-45 lines, >> but no so easy to do) and is_panel_bridge for a better clean up, add >> stm copyright/remove dpms_mode/remove drm_of.h/improve clk >> management/add mode_valid (thanks to comments of Archit Taneja), use >> "DesignWare" instead of "Designware (thanks to comments of Neil >> Armstrong) >> - bridge/synopsys/Kconfig: Remove help section to hide it in menuconfig >> (thanks to comments of Archit Taneja) >> - include/drm/bridge/dw_mipi_dsi.h: Remove drmP.h (thanks to comments >> of Archit Taneja) >> - bindings/display/bridge/dw_mipi_dsi.txt: Improve optional property >> explanations (thanks to comments of Neil Armstrong) >> - stm/ltdc.c: Add is_panel_bridge for a better clean up/remove >> drm_encoder_helper_add() (thanks to comments of Eric Anholt) >> - stm/dw_mipi_dsi-stm.c: remove math64.h/use DRM_WARN/remove warnings >> (thanks to comments of Archit Taneja), minor alignment fix (thanks to >> comments of Neil Armstrong) >> - bindings/display/st,stm32-ltdc.txt: use graph binding in the >> example/improve ports usage doc (thanks to comments of Rob Herring), >> use "DSI" instead of "dsi" where relevant (thanks to comments of Neil >> Armstrong) >> >> Version 3: >> - stm/ltdc: Use panel-bridge (-170 lines), thanks to comments of Eric >> Anholt, >> Boris Brezillon, Archit Taneja & Andrzej Hajda. >> - Synopsys dsi: Add dw_mipi_dsi.h (forgotten in v2), thanks to >> comments of >> Neil Armstrong. >> - Synopsys dsi/dw-mipi-dsi.c: add dw_mipi_dsi_dphy_init() & >> dw_mipi_dsi_dphy_enable() to better manage DW phy-dedicated regs, >> remove >> dw_mipi_dsi_mode enum, remove stm32 patch for lpm, remove pllref >> (manage in >> the vendor phy) thanks to comments of Archit Taneja. Add mode_flags >> to phy >> parameters to better adjust lane mbps according to dsi burst and >> non burst >> modes todos in caps. >> - stm/dw_mipi_dsi-stm.c: Add pllref management. >> - dt-bindings/display/stm: Split dt-bindings patch in two (parent node >> removal/ dsi), add required nodes (port & panel/bridge), updates >> thanks to >> comments of Rob Herring. >> - dt-bindings/display/Synopsys dsi: remove port as part of the vendor >> documentation, add panel/bridge node, update dt-bindings thanks to >> comments >> of Rob Herring. >> - Add more people from Hisilicon & Rockchip. >> >> Version 2: >> - Add a generic Synopsys DesignWare MIPI DSI bridge driver following >> comments from Neil Armstrong & Archit Taneja. >> - Use drm_of_find_panel_or_bridge() thanks to Eric Anholt comments >> - Update dt-bindings thanks to Rob Herring comments >> >> Version 1: >> - Initial commit >> >> The purpose of this set of patches is to add the mipi dsi host driver >> to the stm32 family. >> >> This mipi dsi host driver is based on the Rockchip version of the >> Synopsys Designware mipi dsi driver (rockchip/dw-mipi-dsi.c) >> modified for the stm32 family: >> - replace Rockchip digital & phy specific extensions with stm32's >> ones. >> - add a bridge >> >> Philippe CORNU (7): >> drm/stm: ltdc: Fix leak of px clk enable in some error paths >> drm/stm: ltdc: Add panel-bridge support >> dt-bindings: display: Add Synopsys DW MIPI DSI host controller >> drm/bridge/synopsys: Add MIPI DSI host controller bridge >> dt-bindings: display: stm32: remove st-display-subsystem parent node >> requirement >> dt-bindings: display: stm32: Add DSI controller >> drm/stm: Add STM32 DSI controller driver >> >> .../bindings/display/bridge/dw_mipi_dsi.txt | 32 + >> .../devicetree/bindings/display/st,stm32-ltdc.txt | 105 ++- >> drivers/gpu/drm/bridge/synopsys/Kconfig | 6 + >> drivers/gpu/drm/bridge/synopsys/Makefile | 2 + >> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 981 >> +++++++++++++++++++++ >> drivers/gpu/drm/stm/Kconfig | 9 +- >> drivers/gpu/drm/stm/Makefile | 2 + >> drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 352 ++++++++ >> drivers/gpu/drm/stm/ltdc.c | 220 +---- >> drivers/gpu/drm/stm/ltdc.h | 3 +- >> include/drm/bridge/dw_mipi_dsi.h | 39 + >> 11 files changed, 1568 insertions(+), 183 deletions(-) >> create mode 100644 >> Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt >> create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c >> create mode 100644 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c >> create mode 100644 include/drm/bridge/dw_mipi_dsi.h >> > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
