From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
This documents the binding for the Tegra CEC module.
Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
.../devicetree/bindings/media/tegra-cec.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/tegra-cec.txt
diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt
new file mode 100644
index 000000000000..ba0b6071acaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/tegra-cec.txt
@@ -0,0 +1,26 @@
+* Tegra HDMI CEC driver
+
+The HDMI CEC module is present in Tegra SoCs and its purpose is to
+handle communication between HDMI connected devices over the CEC bus.
+
+Required properties:
+ - compatible : value should be one of the following:
+ "nvidia,tegra114-cec"
+ "nvidia,tegra124-cec"
+ "nvidia,tegra210-cec"
+ - reg : Physical base address of the IP registers and length of memory
+ mapped region.
+ - interrupts : HDMI CEC interrupt number to the CPU.
+ - clocks : from common clock binding: handle to HDMI CEC clock.
+ - clock-names : from common clock binding: must contain "cec",
+ corresponding to ithe entry in the clocks property.
+ - hdmi-phandle : phandle to the HDMI controller, see also cec.txt.
+
+Example:
+
+tegra_cec {
+ compatible = "nvidia,tegra124-cec";
+ reg = <0x0 0x70015000 0x0 0x00001000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_CEC>;
+ clock-names = "cec";
--
2.11.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
