From: Patrick Bruenn <p.bruenn@xxxxxxxxxxxx> Add device tree for Beckhoff CX9020 Embedded PC. The CX9020 differs from i.MX53 Quick Start Board by: - use uart2 instead of uart1 - DVI-D connector instead of VGA - no audio - CCAT FPGA connected to emi - enable rtc Patrick Bruenn (2): ARM: dts: imx: add CX9020 Embedded PC device tree drm/panel: simple: Add support for ddc-only panel arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx53-cx9020.dts | 370 +++++++++++++++++++++++++++++++++++ drivers/gpu/drm/panel/panel-simple.c | 6 + 3 files changed, 377 insertions(+) create mode 100644 arch/arm/boot/dts/imx53-cx9020.dts -- 2.11.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
