On Thu, Jul 13, 2017 at 4:47 PM, Sean Paul <seanpaul@xxxxxxxxxxxx> wrote:
> On Thu, Jul 06, 2017 at 02:57:32PM +0200, Daniel Vetter wrote:
>
> <snip>
>
>> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
>> Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
>
> Just 2 nits, code looks good.
>
> Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
>
>> ---
>> v2: Switch to building fbcon code into fb.ko right away because the
>> cheap trick leads to a module depency loop.
>> ---
>> drivers/video/console/Kconfig | 2 +-
>> drivers/video/console/Makefile | 8 --------
>> drivers/video/fbdev/core/Makefile | 11 +++++++++++
>> drivers/video/{console => fbdev/core}/bitblit.c | 4 ----
>> drivers/video/{console => fbdev/core}/fbcon.c | 13 +++----------
>> drivers/video/{console => fbdev/core}/fbcon.h | 0
>> drivers/video/{console => fbdev/core}/fbcon_ccw.c | 4 ----
>> drivers/video/{console => fbdev/core}/fbcon_cw.c | 4 ----
>> drivers/video/{console => fbdev/core}/fbcon_rotate.c | 4 ----
>> drivers/video/{console => fbdev/core}/fbcon_rotate.h | 0
>> drivers/video/{console => fbdev/core}/fbcon_ud.c | 4 ----
>> drivers/video/fbdev/core/fbmem.c | 6 ++++++
>> drivers/video/{console => fbdev/core}/softcursor.c | 4 ----
>> drivers/video/{console => fbdev/core}/tileblit.c | 5 -----
>> include/linux/fbcon.h | 12 ++++++++++++
>> 15 files changed, 33 insertions(+), 48 deletions(-)
>> rename drivers/video/{console => fbdev/core}/bitblit.c (98%)
>> rename drivers/video/{console => fbdev/core}/fbcon.c (99%)
>> rename drivers/video/{console => fbdev/core}/fbcon.h (100%)
>> rename drivers/video/{console => fbdev/core}/fbcon_ccw.c (98%)
>> rename drivers/video/{console => fbdev/core}/fbcon_cw.c (98%)
>> rename drivers/video/{console => fbdev/core}/fbcon_rotate.c (95%)
>> rename drivers/video/{console => fbdev/core}/fbcon_rotate.h (100%)
>> rename drivers/video/{console => fbdev/core}/fbcon_ud.c (98%)
>> rename drivers/video/{console => fbdev/core}/softcursor.c (93%)
>> rename drivers/video/{console => fbdev/core}/tileblit.c (96%)
>> create mode 100644 include/linux/fbcon.h
>>
>> diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
>> index 2111d06f8c81..7f1f1fbcef9e 100644
>> --- a/drivers/video/console/Kconfig
>> +++ b/drivers/video/console/Kconfig
>> @@ -117,7 +117,7 @@ config DUMMY_CONSOLE_ROWS
>> Select 25 if you use a 640x480 resolution by default.
>>
>> config FRAMEBUFFER_CONSOLE
>> - tristate "Framebuffer Console support"
>> + bool "Framebuffer Console support"
>> depends on FB && !UML
>> select VT_HW_CONSOLE_BINDING
>> select CRC32
>> diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile
>> index 43bfa485db96..eb2cbec52643 100644
>> --- a/drivers/video/console/Makefile
>> +++ b/drivers/video/console/Makefile
>> @@ -7,13 +7,5 @@ obj-$(CONFIG_SGI_NEWPORT_CONSOLE) += newport_con.o
>> obj-$(CONFIG_STI_CONSOLE) += sticon.o sticore.o
>> obj-$(CONFIG_VGA_CONSOLE) += vgacon.o
>> obj-$(CONFIG_MDA_CONSOLE) += mdacon.o
>> -obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += fbcon.o bitblit.o softcursor.o
>> -ifeq ($(CONFIG_FB_TILEBLITTING),y)
>> -obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += tileblit.o
>> -endif
>> -ifeq ($(CONFIG_FRAMEBUFFER_CONSOLE_ROTATION),y)
>> -obj-$(CONFIG_FRAMEBUFFER_CONSOLE) += fbcon_rotate.o fbcon_cw.o fbcon_ud.o \
>> - fbcon_ccw.o
>> -endif
>>
>> obj-$(CONFIG_FB_STI) += sticore.o
>> diff --git a/drivers/video/fbdev/core/Makefile b/drivers/video/fbdev/core/Makefile
>> index 9e3ddf225393..0214b863ac3f 100644
>> --- a/drivers/video/fbdev/core/Makefile
>> +++ b/drivers/video/fbdev/core/Makefile
>> @@ -4,6 +4,17 @@ obj-$(CONFIG_FB) += fb.o
>> fb-y := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
>> modedb.o fbcvt.o
>> fb-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o
>> +
>> +ifeq ($(CONFIG_FRAMEBUFFER_CONSOLE),y)
>> +fb-y += fbcon.o bitblit.o softcursor.o
>
> fb-$(CONFIG_FRAMEBUFFER_CONSOLE) ?
The ifeq is longer than just this line ...
>> +ifeq ($(CONFIG_FB_TILEBLITTING),y)
>> +fb-y += tileblit.o
>> +endif
>> +ifeq ($(CONFIG_FRAMEBUFFER_CONSOLE_ROTATION),y)
>> +fb-y += fbcon_rotate.o fbcon_cw.o fbcon_ud.o \
>> + fbcon_ccw.oli
>> +endif
>> +endif
>> fb-objs := $(fb-y)
>>
>> obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o
>
> <snip>
>
>> diff --git a/include/linux/fbcon.h b/include/linux/fbcon.h
>> new file mode 100644
>> index 000000000000..0fac6305d51c
>> --- /dev/null
>> +++ b/include/linux/fbcon.h
>
> IANAL, but it seems like you're missing some GPL legalese here?
There's a pile of headers which don't have the GPL header (like
linux/fb.h), I went with the local style ... not strictly necessary I
think.
-Daniel
>
> Sean
>
>> @@ -0,0 +1,12 @@
>> +#ifndef _LINUX_FBCON_H
>> +#define _LINUX_FBCON_H
>> +
>> +#ifdef CONFIG_FRAMEBUFFER_CONSOLE
>> +void __init fb_console_init(void);
>> +void __exit fb_console_exit(void);
>> +#else
>> +static void fb_console_init(void) {}
>> +static void fb_console_exit(void) {}
>> +#endif
>> +
>> +#endif /* _LINUX_FBCON_H */
>> --
>> 2.13.2
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@xxxxxxxxxxxxxxxxxxxxx
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
> --
> Sean Paul, Software Engineer, Google / Chromium OS
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
