Re: [Intel-gfx] [RFC v1 01/20] drm/hdcp: HDCP bitmask property for connectors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 12, 2017 at 08:26:02PM +0530, Ramalingam C wrote:
> Daniel,
> 
> Thank you for reviewing the patch in short time. My views are below.
> 
> 
> On Wednesday 12 July 2017 03:24 PM, Daniel Vetter wrote:
> > On Wed, Jul 12, 2017 at 01:58:45PM +0530, Ramalingam C wrote:
> > > DRM connector property is created as bitmask to receive
> > > HDCP enable/disable request along with content type.
> > > 
> > > And also there are Read only status bits for
> > > 	1. HDCP spec capability of the connector + panel
> > > 	2. HDCP encryption status of the connector

Hi Ram,
Thank you for posting this set! I'll do some code review in a separate
pass.


> > > 
> > > Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
> > > ---
> > >   drivers/gpu/drm/drm_connector.c | 30 +++++++++++++++++++++
> > >   include/drm/drm_hdcp.h          | 58 +++++++++++++++++++++++++++++++++++++++++
> > >   include/drm/drm_mode_config.h   |  5 ++++
> > >   3 files changed, 93 insertions(+)
> > >   create mode 100644 include/drm/drm_hdcp.h
> > > 
> > > diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> > > index 8072e6e..04f8cf8 100644
> > > --- a/drivers/gpu/drm/drm_connector.c
> > > +++ b/drivers/gpu/drm/drm_connector.c
> > > @@ -24,6 +24,7 @@
> > >   #include <drm/drm_connector.h>
> > >   #include <drm/drm_edid.h>
> > >   #include <drm/drm_encoder.h>
> > > +#include <drm/drm_hdcp.h>
> > >   #include "drm_crtc_internal.h"
> > >   #include "drm_internal.h"
> > > @@ -617,6 +618,28 @@ static const struct drm_prop_enum_list drm_link_status_enum_list[] = {
> > >   };
> > >   DRM_ENUM_NAME_FN(drm_get_link_status_name, drm_link_status_enum_list)
> > > +static const struct drm_prop_enum_list drm_hdcp_enum_list[] = {
> > > +	{ __builtin_ffs(DRM_HDCP_ENABLE) - 1,
> > > +					"Enable HDCP Encryption" },
> > > +	{ __builtin_ffs(DRM_HDCP_TYPE_BIT0) - 1,
> > > +					"HDCP Content type bit0" },
> > > +	{ __builtin_ffs(DRM_HDCP_TYPE_BIT1) - 1,
> > > +					"HDCP Content type bit1" },
> > > +	{ __builtin_ffs(DRM_HDCP1_SUPPORTED) - 1,
> > > +					"HDCP1.x Supported" },
> > > +	{ __builtin_ffs(DRM_HDCP2_SUPPORTED) - 1,
> > > +					"HDCP2.x Supported" },
> > > +	{ __builtin_ffs(DRM_HDCP_WIP) - 1,
> > > +					"HDCP work in progress" },
> > > +	{ __builtin_ffs(DRM_HDCP_AUTH_FAILED) - 1,
> > > +					"HDCP Authentication Failed" },
> > > +	{ __builtin_ffs(DRM_HDCP_LINK_INTEGRITY_FAILED) - 1,
> > > +					"HDCP Link Integrity Failed" },
> > > +	{ __builtin_ffs(DRM_HDCP_REAUTH_REQUESTED) - 1,
> > > +					"HDCP Reauthentication Requested" },
> > Why all these intermediate steps and different failure modes? Either hdcp
> > works, or it doesnt (and we can split up with the type 0 or type 1 if
> > needed), but I don't know what userspace would do with all the other
> > stuff?
> enum values  HDCP_ENABLE, HDCP_ENABLE_TYPE1 and HDCP_DISABLE along with
> kobj-uevent
> for HDCP state change, could do the bare minimal HDCP1.4 and HDCP2.2
> configuration.
> 
> And without Type info it is not possible for HDCP2.2.

I've had requests from chrome team to expose HDCP version, so I don't think this
is too contentious.

Note that I've tried to use "content protection" instead of HDCP. My original
thinking was that since HDCP 1.x was broken, there was probably going to be
something else coming along. It's probably best to continue to keep the means of
protection vague, since you never know what will happen with HDCP 2.2 and what
will come after it.


> 
> But to inform whether both HDCP source and Sink support HDCP1.4/2.2/None I
> wanted to add
> the capability bits. These capability flags could be avoided if the presence
> of the drm_hdcp_property
> on connector, assures the corresponding HDCP version support on both HDCP
> src and sink.
> But for that we need a way to detach/alter the DRM_property of connector
> based on HDCP
> sink's hdcp version capability. Need to explore on that direction if that is
> allowed.

Meh, just change the content protection type to UNSUPPORTED or whatever.

> 
> Once HDCP protection is enabled link protection might break for many reasons
> including hot unplug. So Other Error
> flags are just to give more information to UMD on that scenario. But we can
> avoid them by setting the state
> as HDCP_DISABLE and notifying the UMD through Kobj-uevent for HDCP state
> change.

I can't think of a scenario where this info is worth exposing to userspace. We
can just log failures for debugging purposes and we'll be fine.

> 
> But one concern remains un-addressed that is compliance requirement will
> force us to reauthenticate
> in case of failures in authentication or on HDCP enabled link. In that
> scenario UMD has to be in formed that
> reauth is in progress. If UMD wants the port to be reenabled it has to wait
> for the completion of reauth else
> it has to place request for disabling the HDCP on port. We might want to add
> a enum value as HDCP_DISABLE_REAUTH.
> What is your opinion on this?

Let's worry about that if it actually becomes a problem. I don't anticipate
needing such fine grained controls.

> > 
> > This also doesn't seem to do the lockdown mode to force hdcp mode. And
> > afair it also doesn't match what CrOS currently uses, which means we don't
> > have userspace for this.
> AFAIK, Either way we don't have userspace for HDCP2.2 at present, as CrOS
> interface is designed for
> HDCP1.4(Need to cross check this with sean). But I will check with seanpaul
> if there is any plan for extending it for HDCP2.2 too.
> If so we could enable CrOS as consumer for HDCP2.2 against planned open
> source consumer from my side.
> 
> As discussed in cover letter I am starting on a UMD library
> which will be open sourced as a HDCP1.4 and 2.2 service provider for
> chromebox stack and Android.

I'm not sure this really justifies its own library. Or at least, I hope it
doesn't. All userspace should have to do is 3 things:

1- Tell kernel it wants content protection
2- Determine what method is being used for content protection
3- Determine if the display is protected at any given time

Chrome, Android (well, drm_hwc) already understand drm properties, so I'm not
sure how they would benefit from an additional layer of misdirection.

Sean


> 
> > 
> > I think the best approach would be if we simply try to upstream _exactly_
> > the property CrOS currently uses (not even bothering with type 0 vs type 1
> > if that's not required), since that is the currently only open source
> > userspace that asks for this.
> At first stage, as we are developing the HDCP2.2 support at DRM at first
> than HDCP1.4,
> we need to extend CrOS property for HDCP2.2 and then upstream. That will be
> the fruitful solution for us.
> 
> --Ram
> >   Going with a much more complicated or
> > different interface just because only risks a massive discussion and
> > subsequent long delays.
> > -Daniel
> > 
> > > +};
> > > +DRM_ENUM_NAME_FN(drm_get_hdcp_name, drm_hdcp_enum_list)
> > > +
> > >   /**
> > >    * drm_display_info_set_bus_formats - set the supported bus formats
> > >    * @info: display info to store bus formats in
> > > @@ -789,6 +812,13 @@ int drm_connector_create_standard_properties(struct drm_device *dev)
> > >   		return -ENOMEM;
> > >   	dev->mode_config.link_status_property = prop;
> > > +	prop = drm_property_create_bitmask(dev, 0, "hdcp", drm_hdcp_enum_list,
> > > +					   ARRAY_SIZE(drm_hdcp_enum_list),
> > > +					   DRM_HDCP_PROP_SUPPORTED_BITS);
> > > +	if (!prop)
> > > +		return -ENOMEM;
> > > +	dev->mode_config.hdcp_property = prop;
> > > +
> > >   	return 0;
> > >   }
> > > diff --git a/include/drm/drm_hdcp.h b/include/drm/drm_hdcp.h
> > > new file mode 100644
> > > index 0000000..7cebf0f
> > > --- /dev/null
> > > +++ b/include/drm/drm_hdcp.h
> > > @@ -0,0 +1,58 @@
> > > +/*
> > > + * Copyright (c) 2017 Intel Corporation
> > > + *
> > > + * Permission to use, copy, modify, distribute, and sell this software and its
> > > + * documentation for any purpose is hereby granted without fee, provided that
> > > + * the above copyright notice appear in all copies and that both that copyright
> > > + * notice and this permission notice appear in supporting documentation, and
> > > + * that the name of the copyright holders not be used in advertising or
> > > + * publicity pertaining to distribution of the software without specific,
> > > + * written prior permission.  The copyright holders make no representations
> > > + * about the suitability of this software for any purpose.  It is provided "as
> > > + * is" without express or implied warranty.
> > > + *
> > > + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
> > > + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
> > > + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
> > > + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
> > > + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
> > > + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
> > > + * OF THIS SOFTWARE.
> > > + */
> > > +
> > > +/*
> > > + * Header for HDCP specific data
> > > + */
> > > +
> > > +#ifndef __DRM_HDCP_H__
> > > +#define __DRM_HDCP_H__
> > > +
> > > +/**
> > > + * HDCP property related information
> > > + */
> > > +/* RW: HDCP Encryption Requests and Status bits */
> > > +#define DRM_HDCP_ENABLE				BIT(0)
> > > +#define DRM_HDCP_TYPE_BIT0			BIT(4)
> > > +#define DRM_HDCP_TYPE_BIT1			BIT(5)
> > > +
> > > +/* RO: HDCP Version supported on Platform + panel */
> > > +#define DRM_HDCP1_SUPPORTED			BIT(12)
> > > +#define DRM_HDCP2_SUPPORTED			BIT(13)
> > > +
> > > +/* RO: Status of the requested operations */
> > > +#define DRM_HDCP_WIP				BIT(20)
> > > +#define DRM_HDCP_AUTH_FAILED			BIT(21)
> > > +
> > > +/* RO: Error Status From HDCP sink */
> > > +#define DRM_HDCP_LINK_INTEGRITY_FAILED		BIT(22)
> > > +#define DRM_HDCP_REAUTH_REQUESTED		BIT(23)
> > > +
> > > +#define DRM_HDCP_PROP_SUPPORTED_BITS	(DRM_HDCP_ENABLE | DRM_HDCP_TYPE_BIT0 \
> > > +					| DRM_HDCP_TYPE_BIT1 | \
> > > +					DRM_HDCP1_SUPPORTED | \
> > > +					DRM_HDCP2_SUPPORTED | DRM_HDCP_WIP | \
> > > +					DRM_HDCP_AUTH_FAILED | \
> > > +					DRM_HDCP_LINK_INTEGRITY_FAILED | \
> > > +					DRM_HDCP_REAUTH_REQUESTED)
> > > +
> > > +#endif	/* __DRM_HDCP_H__ */
> > > diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> > > index 4298171..0c5bb90 100644
> > > --- a/include/drm/drm_mode_config.h
> > > +++ b/include/drm/drm_mode_config.h
> > > @@ -538,6 +538,11 @@ struct drm_mode_config {
> > >   	 */
> > >   	struct drm_property *link_status_property;
> > >   	/**
> > > +	 * @hdcp_property: Default connector property for HDCP
> > > +	 * of a connector
> > > +	 */
> > > +	struct drm_property *hdcp_property;
> > > +	/**
> > >   	 * @plane_type_property: Default plane property to differentiate
> > >   	 * CURSOR, PRIMARY and OVERLAY legacy uses of planes.
> > >   	 */
> > > -- 
> > > 2.7.4
> > > 
> > > _______________________________________________
> > > Intel-gfx mailing list
> > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> > 

> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel


-- 
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux