On Mon, Jul 10, 2017 at 04:48:38PM +0530, Shashank Sharma wrote:
> This patch checks encoder level support for YCBCR420 outputs.
> The logic goes as simple as this:
> If the input mode is YCBCR420-only mode: prepare HDMI for
> YCBCR420 output, else continue with RGB output mode.
>
> It checks if the mode is YCBCR420 and source can support this
> output then it marks the ycbcr_420 output indicator into crtc
> state, for further staging in driver.
>
> V2: Split the patch into two, kept helper functions in DRM layer.
> V3: Changed the compute_config function based on new DRM API.
> V4: Rebase
> V5: Rebase
> V6: Check and handle YCBCR420-only modes, discard the property
> based approach (Ville)
>
> Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_display.c | 1 +
> drivers/gpu/drm/i915/intel_drv.h | 3 +++
> drivers/gpu/drm/i915/intel_hdmi.c | 42 +++++++++++++++++++++++++++++++++---
> 3 files changed, 43 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 4e03ca6..01900e1 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -11930,6 +11930,7 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,
> PIPE_CONF_CHECK_I(hdmi_scrambling);
> PIPE_CONF_CHECK_I(hdmi_high_tmds_clock_ratio);
> PIPE_CONF_CHECK_I(has_infoframe);
> + PIPE_CONF_CHECK_I(ycbcr420);
>
> PIPE_CONF_CHECK_I(has_audio);
>
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index d17a324..592243b 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -780,6 +780,9 @@ struct intel_crtc_state {
>
> /* HDMI High TMDS char rate ratio */
> bool hdmi_high_tmds_clock_ratio;
> +
> + /* HDMI output type */
> + bool ycbcr420;
> };
>
> struct intel_crtc {
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index cc0d100..276d916 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -1305,7 +1305,8 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
> return status;
> }
>
> -static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state)
> +static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state,
> + bool output_ycbcr420)
You alreayd have the crtc state, so no need to pass that stuff
separately.
> {
> struct drm_i915_private *dev_priv =
> to_i915(crtc_state->base.crtc->dev);
> @@ -1330,6 +1331,13 @@ static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state)
> if (connector_state->crtc != crtc_state->base.crtc)
> continue;
>
> + if (output_ycbcr420) {
> + const struct drm_hdmi_info *hdmi = &info->hdmi;
> +
> + if (!(hdmi->y420_dc_modes & DRM_EDID_YCBCR420_DC_36))
> + return false;
> + }
> +
else?
> if ((info->edid_hdmi_dc_modes & DRM_EDID_HDMI_DC_36) == 0)
> return false;
> }
> @@ -1342,6 +1350,25 @@ static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state)
> return true;
> }
>
> +static bool
> +intel_hdmi_ycbcr420_config(struct drm_connector *connector,
> + struct intel_crtc_state *config,
> + int *clock_12bpc, int *clock_8bpc)
> +{
> +
> + if (!connector->ycbcr_420_allowed) {
> + DRM_ERROR("Platform doesn't support YCBCR420 output\n");
> + return false;
> + }
> +
> + /* YCBCR420 TMDS rate requirement is half the pixel clock */
> + config->port_clock /= 2;
> + *clock_12bpc /= 2;
> + *clock_8bpc /= 2;
> + config->ycbcr420 = true;
> + return true;
> +}
> +
> bool intel_hdmi_compute_config(struct intel_encoder *encoder,
> struct intel_crtc_state *pipe_config,
> struct drm_connector_state *conn_state)
> @@ -1349,7 +1376,8 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
> struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
> - struct drm_scdc *scdc = &conn_state->connector->display_info.hdmi.scdc;
> + struct drm_connector *connector = conn_state->connector;
> + struct drm_scdc *scdc = &connector->display_info.hdmi.scdc;
> struct intel_digital_connector_state *intel_conn_state =
> to_intel_digital_connector_state(conn_state);
> int clock_8bpc = pipe_config->base.adjusted_mode.crtc_clock;
> @@ -1379,6 +1407,14 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
> clock_12bpc *= 2;
> }
>
> + if (drm_mode_is_420_only(&connector->display_info, adjusted_mode)) {
> + if (!intel_hdmi_ycbcr420_config(connector, pipe_config,
> + &clock_12bpc, &clock_8bpc)) {
> + DRM_ERROR("Can't support YCBCR420 output\n");
> + return false;
> + }
> + }
> +
> if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv))
> pipe_config->has_pch_encoder = true;
>
> @@ -1398,7 +1434,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
> */
> if (pipe_config->pipe_bpp > 8*3 && pipe_config->has_hdmi_sink && !force_dvi &&
> hdmi_port_clock_valid(intel_hdmi, clock_12bpc, true, force_dvi) == MODE_OK &&
> - hdmi_12bpc_possible(pipe_config)) {
> + hdmi_12bpc_possible(pipe_config, pipe_config->ycbcr420)) {
> DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
> desired_bpp = 12*3;
>
> --
> 2.7.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
