LSPCON chips support YCBCR420 outputs. To be able to get
YCBCR420 output from LSPCON chip, the source should:
- Generate YCBCR444 HDMI output
- Set AVI infoframes for a YCBCR420 output.
LSPCON FW gets the information from AVI infoframes, and generates
YCBCR420 output from a YCBCR444 input. This patch adds the necessary
changes to drive YCBCR420 output from LSPCON based HDMI output.
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Imre Deak <imre.deak@xxxxxxxxx>
Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 10 +++++++---
drivers/gpu/drm/i915/intel_dp.c | 16 +++++++++++++++-
drivers/gpu/drm/i915/intel_drv.h | 20 +++++++++++++++++---
drivers/gpu/drm/i915/intel_hdmi.c | 7 +++++--
drivers/gpu/drm/i915/intel_lspcon.c | 17 +++++++++++++++++
5 files changed, 61 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c5ff568..c3c7b31 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8125,9 +8125,11 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
if (config->ycbcr420) {
- val |= PIPEMISC_OUTPUT_YCBCR |
- PIPEMISC_YCBCR420_ENABLE |
- PIPEMISC_YCBCR420_MODE_BLEND;
+ val |= PIPEMISC_OUTPUT_YCBCR;
+
+ if (!config->lspcon_active)
+ val |= PIPEMISC_YCBCR420_ENABLE |
+ PIPEMISC_YCBCR420_MODE_BLEND;
}
I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
@@ -14205,11 +14207,13 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
* DDI_BUF_CTL_A or SFUSE_STRAP registers, find another way to
* detect the ports.
*/
+
intel_ddi_init(dev_priv, PORT_A);
intel_ddi_init(dev_priv, PORT_B);
intel_ddi_init(dev_priv, PORT_C);
intel_dsi_init(dev_priv);
+
} else if (HAS_DDI(dev_priv)) {
int found;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 67bc8a7a..1690aa9 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1614,7 +1614,9 @@ intel_dp_compute_config(struct intel_encoder *encoder,
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
- enum port port = dp_to_dig_port(intel_dp)->port;
+ struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
+ enum port port = dig_port->port;
+ struct intel_lspcon *lspcon = &dig_port->lspcon;
struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc);
struct intel_connector *intel_connector = intel_dp->attached_connector;
struct intel_digital_connector_state *intel_conn_state =
@@ -1635,6 +1637,18 @@ intel_dp_compute_config(struct intel_encoder *encoder,
common_len = intel_dp_common_len_rate_limit(intel_dp,
intel_dp->max_link_rate);
+ /* LSPCON needs special handling to drive YCBCR420 outputs */
+ if (lspcon->active) {
+ struct drm_connector *connector = &intel_connector->base;
+ int clock_8bpc = pipe_config->base.adjusted_mode.crtc_clock;
+ int clock_12bpc = clock_8bpc * 3 / 2;
+
+ pipe_config->lspcon_active = true;
+ pipe_config->ycbcr420 = lspcon_ycbcr420_config(connector,
+ pipe_config, &clock_12bpc,
+ &clock_8bpc);
+ }
+
/* No common link rates between source and sink */
WARN_ON(common_len <= 0);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index ed04de9..40d56f2 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -790,6 +790,9 @@ struct intel_crtc_state {
/* HDMI output type */
bool ycbcr420;
+
+ /* LSPCON is active on port */
+ bool lspcon_active;
};
struct intel_crtc {
@@ -1205,6 +1208,12 @@ static inline struct intel_dp *enc_to_intel_dp(struct drm_encoder *encoder)
return &enc_to_dig_port(encoder)->dp;
}
+static inline struct intel_lspcon *
+enc_to_intel_lspcon(struct drm_encoder *encoder)
+{
+ return &enc_to_dig_port(encoder)->lspcon;
+}
+
static inline struct intel_digital_port *
dp_to_dig_port(struct intel_dp *intel_dp)
{
@@ -1675,14 +1684,16 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
struct intel_connector *intel_connector);
struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder);
bool intel_hdmi_compute_config(struct intel_encoder *encoder,
- struct intel_crtc_state *pipe_config,
- struct drm_connector_state *conn_state);
+ struct intel_crtc_state *pipe_config,
+ struct drm_connector_state *conn_state);
void intel_hdmi_handle_sink_scrambling(struct intel_encoder *intel_encoder,
struct drm_connector *connector,
bool high_tmds_clock_ratio,
bool scrambling);
void intel_dp_dual_mode_set_tmds_output(struct intel_hdmi *hdmi, bool enable);
-
+bool intel_hdmi_ycbcr420_config(struct drm_connector *connector,
+ struct intel_crtc_state *config,
+ int *clock_12bpc, int *clock_8bpc);
/* intel_lvds.c */
void intel_lvds_init(struct drm_i915_private *dev_priv);
@@ -2003,6 +2014,9 @@ void intel_color_load_luts(struct drm_crtc_state *crtc_state);
bool lspcon_init(struct intel_digital_port *intel_dig_port);
void lspcon_resume(struct intel_lspcon *lspcon);
void lspcon_wait_pcon_mode(struct intel_lspcon *lspcon);
+bool lspcon_ycbcr420_config(struct drm_connector *connector,
+ struct intel_crtc_state *config,
+ int *clock_12bpc, int *clock_8bpc);
/* intel_pipe_crc.c */
int intel_pipe_crc_create(struct drm_minor *minor);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index d1b1efc..a08ab99 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1362,8 +1362,7 @@ static bool hdmi_12bpc_possible(struct intel_crtc_state *crtc_state,
return true;
}
-static bool
-intel_hdmi_ycbcr420_config(struct drm_connector *connector,
+bool intel_hdmi_ycbcr420_config(struct drm_connector *connector,
struct intel_crtc_state *config,
int *clock_12bpc, int *clock_8bpc)
{
@@ -1380,6 +1379,10 @@ intel_hdmi_ycbcr420_config(struct drm_connector *connector,
*clock_8bpc /= 2;
config->ycbcr420 = true;
+ /* LSPCON doesn't need scaler for YCBCR420 output */
+ if (config->lspcon_active)
+ return true;
+
/* YCBCR 420 output conversion needs a scaler */
if (skl_update_scaler_crtc_420_output(config)) {
DRM_ERROR("Scaler allocation for output failed\n");
diff --git a/drivers/gpu/drm/i915/intel_lspcon.c b/drivers/gpu/drm/i915/intel_lspcon.c
index a350d79..f611b6d 100644
--- a/drivers/gpu/drm/i915/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/intel_lspcon.c
@@ -202,6 +202,21 @@ static void lspcon_resume_in_pcon_wa(struct intel_lspcon *lspcon)
DRM_DEBUG_KMS("LSPCON DP descriptor mismatch after resume\n");
}
+bool lspcon_ycbcr420_config(struct drm_connector *connector,
+ struct intel_crtc_state *config,
+ int *clock_12bpc, int *clock_8bpc)
+{
+ struct drm_display_info *info = &connector->display_info;
+ struct drm_display_mode *mode = &config->base.adjusted_mode;
+
+ if (drm_mode_is_420_only(info, mode)) {
+ return intel_hdmi_ycbcr420_config(connector, config,
+ clock_12bpc, clock_8bpc);
+ }
+
+ return false;
+}
+
void lspcon_resume(struct intel_lspcon *lspcon)
{
enum drm_lspcon_mode expected_mode;
@@ -233,6 +248,7 @@ bool lspcon_init(struct intel_digital_port *intel_dig_port)
struct intel_lspcon *lspcon = &intel_dig_port->lspcon;
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
+ struct drm_connector *connector = &dp->attached_connector->base;
if (!IS_GEN9(dev_priv)) {
DRM_ERROR("LSPCON is supported on GEN9 only\n");
@@ -264,6 +280,7 @@ bool lspcon_init(struct intel_digital_port *intel_dig_port)
return false;
}
+ connector->ycbcr_420_allowed = true;
drm_dp_read_desc(&dp->aux, &dp->desc, drm_dp_is_branch(dp->dpcd));
DRM_DEBUG_KMS("Success: LSPCON init\n");
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
