To get HDMI YCBCR420 output, the PIPEMISC register should be
programmed to:
- Generate YCBCR output (bit 11)
- In case of YCBCR420 outputs, it should be programmed in full
blend mode to use the scaler in 5x3 ratio (bits 26 and 27)
This patch:
- Adds definition of these bits.
- Programs PIPEMISC for YCBCR420 outputs.
V2: rebase
V3: rebase
V4: rebase
V5: added r-b from Ander
V6: Handle only YCBCR420 outputs (ville)
Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Ander Conselvan de Oliveira <conselvan2@xxxxxxxxx>
Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@xxxxxxxxx>
Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 3 +++
drivers/gpu/drm/i915/intel_display.c | 7 +++++++
2 files changed, 10 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 64cc674..5aea2a9 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -5227,6 +5227,9 @@ enum {
#define _PIPE_MISC_A 0x70030
#define _PIPE_MISC_B 0x71030
+#define PIPEMISC_YCBCR420_ENABLE (1<<27)
+#define PIPEMISC_YCBCR420_MODE_BLEND (1<<26)
+#define PIPEMISC_OUTPUT_YCBCR (1<<11)
#define PIPEMISC_DITHER_BPC_MASK (7<<5)
#define PIPEMISC_DITHER_8_BPC (0<<5)
#define PIPEMISC_DITHER_10_BPC (1<<5)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c56081e..b4a6415 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8081,6 +8081,7 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
{
struct drm_i915_private *dev_priv = to_i915(crtc->dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_crtc_state *config = intel_crtc->config;
if (IS_BROADWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 9) {
u32 val = 0;
@@ -8106,6 +8107,12 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
if (intel_crtc->config->dither)
val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
+ if (config->ycbcr420) {
+ val |= PIPEMISC_OUTPUT_YCBCR |
+ PIPEMISC_YCBCR420_ENABLE |
+ PIPEMISC_YCBCR420_MODE_BLEND;
+ }
+
I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
}
}
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
