On Fri, Jun 30, 2017 at 03:12:51PM +0200, Daniel Vetter wrote: > On Fri, Jun 30, 2017 at 03:27:29PM +0300, ville.syrjala@xxxxxxxxxxxxxxx wrote: > > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > > > Make sure the armed even doesn't fire until the next vblank by adding > > one to the current vblank counter value. This will prevent the event > > being fired off prematurely if drm_handle_vblank() is called > > redundantly, or if the irq handler gets delayed somehow. > > > > This is actually a real race on Intel gen2/3 hardware due to the vblank > > interrupt firing approx. one or more scanlines after the start of vblank > > (which is when the double buffered registers get latched). So if we were > > to perform an atomic update just after the start of vblank, but before > > the irq has fired, the irq handler would send out the the event immediately > > instead of waiting for the next vblank like it should. > > > > This also makes logs less confusing because now it normally looks like > > the vblank interrupt was somehow missed and the event gets sent one > > frame too late. > > So this para here I like, since the others are already written off in the > kernel-doc as "don't use this function if this is a problem for you". I'd > say your claim is even wrong, since we're not using > drm_accurate_vblank_count, and so the race still exists (if you're > sufficiently unlucky at least, and since there can be an arbitrary delay > between when the hw raises an irq and when the kernel runs the irq > handler it's not any better). At least for i915 it should be accurate if the irq wasn't enabled prior to starting the pipe update as we'll update the counter when enabling the irq. To make sure it's accurate we should probably have a drm_vblank_get_accurate() or something like that. > > Anyway, as long as it's not cc: stable (that would need more convincing on > my side): > > Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx> > > > > Cc: Daniel Vetter <daniel@xxxxxxxx> > > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > --- > > drivers/gpu/drm/drm_vblank.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c > > index bfe86fa2d3b1..823c853de052 100644 > > --- a/drivers/gpu/drm/drm_vblank.c > > +++ b/drivers/gpu/drm/drm_vblank.c > > @@ -869,7 +869,7 @@ void drm_crtc_arm_vblank_event(struct drm_crtc *crtc, > > assert_spin_locked(&dev->event_lock); > > > > e->pipe = pipe; > > - e->event.sequence = drm_vblank_count(dev, pipe); > > + e->event.sequence = drm_vblank_count(dev, pipe) + 1; > > e->event.crtc_id = crtc->base.id; > > list_add_tail(&e->base.link, &dev->vblank_event_list); > > } > > -- > > 2.13.0 > > > > -- > Daniel Vetter > Software Engineer, Intel Corporation > http://blog.ffwll.ch -- Ville Syrjälä Intel OTC _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
