Hi Daniel, Alexey,
On 25-05-2017 15:19, Jose Abreu wrote:
> Now that we have a callback to check if crtc supports a given mode
> we can use it in arcpgu so that we restrict the number of probbed
> modes to the ones we can actually display.
>
> This is specially useful because arcpgu crtc is responsible to set
> a clock value in the commit() stage but unfortunatelly this clock
> does not support all the needed ranges.
>
> Also, remove the atomic_check() callback as mode_valid() callback
> will be called before.
>
> Signed-off-by: Jose Abreu <joabreu@xxxxxxxxxxxx>
> Reviewed-by: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
@Daniel: I know that arcpgu is not under drm-misc but could you
apply this into drm-misc-next? Alexey (the arcpgu maintainer)
already gave the reviewed-by and this is also "Reviewed-by: Neil
Armstrong <narmstrong@xxxxxxxxxxxx>". It was also tested-by: me.
@Alexey: Is this ok for you?
I need this because I have a pending patch for accepting clock
variations instead of always failing when clk_round_rate() does
not return the expected rate.
Best regards,
Jose Miguel Abreu
> Cc: Carlos Palminha <palminha@xxxxxxxxxxxx>
> Cc: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
> Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
> Cc: Dave Airlie <airlied@xxxxxxxx>
> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>
> Changes v4->v5:
> - Change commit message to "arcpgu" (Alexey)
> Changes v3->v4:
> - Do not use aux function (Laurent)
>
> ---
> drivers/gpu/drm/arc/arcpgu_crtc.c | 29 ++++++++++++++---------------
> 1 file changed, 14 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/arc/arcpgu_crtc.c b/drivers/gpu/drm/arc/arcpgu_crtc.c
> index ad9a959..99fbdae 100644
> --- a/drivers/gpu/drm/arc/arcpgu_crtc.c
> +++ b/drivers/gpu/drm/arc/arcpgu_crtc.c
> @@ -64,6 +64,19 @@ static void arc_pgu_set_pxl_fmt(struct drm_crtc *crtc)
> .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> };
>
> +enum drm_mode_status arc_pgu_crtc_mode_valid(struct drm_crtc *crtc,
> + const struct drm_display_mode *mode)
> +{
> + struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
> + long rate, clk_rate = mode->clock * 1000;
> +
> + rate = clk_round_rate(arcpgu->clk, clk_rate);
> + if (rate != clk_rate)
> + return MODE_NOCLOCK;
> +
> + return MODE_OK;
> +}
> +
> static void arc_pgu_crtc_mode_set_nofb(struct drm_crtc *crtc)
> {
> struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
> @@ -129,20 +142,6 @@ static void arc_pgu_crtc_disable(struct drm_crtc *crtc)
> ~ARCPGU_CTRL_ENABLE_MASK);
> }
>
> -static int arc_pgu_crtc_atomic_check(struct drm_crtc *crtc,
> - struct drm_crtc_state *state)
> -{
> - struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
> - struct drm_display_mode *mode = &state->adjusted_mode;
> - long rate, clk_rate = mode->clock * 1000;
> -
> - rate = clk_round_rate(arcpgu->clk, clk_rate);
> - if (rate != clk_rate)
> - return -EINVAL;
> -
> - return 0;
> -}
> -
> static void arc_pgu_crtc_atomic_begin(struct drm_crtc *crtc,
> struct drm_crtc_state *state)
> {
> @@ -158,6 +157,7 @@ static void arc_pgu_crtc_atomic_begin(struct drm_crtc *crtc,
> }
>
> static const struct drm_crtc_helper_funcs arc_pgu_crtc_helper_funcs = {
> + .mode_valid = arc_pgu_crtc_mode_valid,
> .mode_set = drm_helper_crtc_mode_set,
> .mode_set_base = drm_helper_crtc_mode_set_base,
> .mode_set_nofb = arc_pgu_crtc_mode_set_nofb,
> @@ -165,7 +165,6 @@ static void arc_pgu_crtc_atomic_begin(struct drm_crtc *crtc,
> .disable = arc_pgu_crtc_disable,
> .prepare = arc_pgu_crtc_disable,
> .commit = arc_pgu_crtc_enable,
> - .atomic_check = arc_pgu_crtc_atomic_check,
> .atomic_begin = arc_pgu_crtc_atomic_begin,
> };
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
