On Sat, Jun 17, 2017 at 07:48:02PM +0200, Peter Rosin wrote:
> All layers of all supported chips support this, the only variable is the
> base address of the lookup table in the register map.
>
> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
As Boris said, pls use the new color manager stuff for atomic drivers, and
then use the helper to implement the legacy kms LUT support on top of it,
it's drm_atomic_helper_legacy_gamma_set().
-Daniel
> ---
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 5 +++++
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 13 +++++++++++
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h | 16 ++++++++++++++
> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 29 +++++++++++++++++++++++++
> 4 files changed, 63 insertions(+)
>
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> index 5348985..694adcc 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> @@ -429,6 +429,8 @@ static const struct drm_crtc_funcs atmel_hlcdc_crtc_funcs = {
> .atomic_destroy_state = atmel_hlcdc_crtc_destroy_state,
> .enable_vblank = atmel_hlcdc_crtc_enable_vblank,
> .disable_vblank = atmel_hlcdc_crtc_disable_vblank,
> + .set_property = drm_atomic_helper_crtc_set_property,
> + .gamma_set = drm_atomic_helper_legacy_gamma_set,
> };
>
> int atmel_hlcdc_crtc_create(struct drm_device *dev)
> @@ -484,6 +486,9 @@ int atmel_hlcdc_crtc_create(struct drm_device *dev)
> drm_crtc_helper_add(&crtc->base, &lcdc_crtc_helper_funcs);
> drm_crtc_vblank_reset(&crtc->base);
>
> + drm_mode_crtc_set_gamma_size(&crtc->base, ATMEL_HLCDC_CLUT_SIZE);
> + drm_crtc_enable_color_mgmt(&crtc->base, 0, false, ATMEL_HLCDC_CLUT_SIZE);
> +
> dc->crtc = &crtc->base;
>
> return 0;
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
> index 30dbffd..4f6ef07 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
> @@ -42,6 +42,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9n12_layers[] = {
> .default_color = 3,
> .general_config = 4,
> },
> + .clut_offset = 0x400,
> },
> };
>
> @@ -73,6 +74,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
> .disc_pos = 5,
> .disc_size = 6,
> },
> + .clut_offset = 0x400,
> },
> {
> .name = "overlay1",
> @@ -91,6 +93,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
> .chroma_key_mask = 8,
> .general_config = 9,
> },
> + .clut_offset = 0x800,
> },
> {
> .name = "high-end-overlay",
> @@ -112,6 +115,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
> .scaler_config = 13,
> .csc = 14,
> },
> + .clut_offset = 0x1000,
> },
> {
> .name = "cursor",
> @@ -131,6 +135,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = {
> .chroma_key_mask = 8,
> .general_config = 9,
> },
> + .clut_offset = 0x1400,
> },
> };
>
> @@ -162,6 +167,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
> .disc_pos = 5,
> .disc_size = 6,
> },
> + .clut_offset = 0x600,
> },
> {
> .name = "overlay1",
> @@ -180,6 +186,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
> .chroma_key_mask = 8,
> .general_config = 9,
> },
> + .clut_offset = 0xa00,
> },
> {
> .name = "overlay2",
> @@ -198,6 +205,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
> .chroma_key_mask = 8,
> .general_config = 9,
> },
> + .clut_offset = 0xe00,
> },
> {
> .name = "high-end-overlay",
> @@ -223,6 +231,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
> },
> .csc = 14,
> },
> + .clut_offset = 0x1200,
> },
> {
> .name = "cursor",
> @@ -244,6 +253,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = {
> .general_config = 9,
> .scaler_config = 13,
> },
> + .clut_offset = 0x1600,
> },
> };
>
> @@ -275,6 +285,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
> .disc_pos = 5,
> .disc_size = 6,
> },
> + .clut_offset = 0x600,
> },
> {
> .name = "overlay1",
> @@ -293,6 +304,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
> .chroma_key_mask = 8,
> .general_config = 9,
> },
> + .clut_offset = 0xa00,
> },
> {
> .name = "overlay2",
> @@ -336,6 +348,7 @@ static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = {
> },
> .csc = 14,
> },
> + .clut_offset = 0x1200,
> },
> };
>
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
> index b0596a8..709f7b9 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h
> @@ -88,6 +88,11 @@
> #define ATMEL_HLCDC_YUV422SWP BIT(17)
> #define ATMEL_HLCDC_DSCALEOPT BIT(20)
>
> +#define ATMEL_HLCDC_C1_MODE ATMEL_HLCDC_CLUT_MODE(0)
> +#define ATMEL_HLCDC_C2_MODE ATMEL_HLCDC_CLUT_MODE(1)
> +#define ATMEL_HLCDC_C4_MODE ATMEL_HLCDC_CLUT_MODE(2)
> +#define ATMEL_HLCDC_C8_MODE ATMEL_HLCDC_CLUT_MODE(3)
> +
> #define ATMEL_HLCDC_XRGB4444_MODE ATMEL_HLCDC_RGB_MODE(0)
> #define ATMEL_HLCDC_ARGB4444_MODE ATMEL_HLCDC_RGB_MODE(1)
> #define ATMEL_HLCDC_RGBA4444_MODE ATMEL_HLCDC_RGB_MODE(2)
> @@ -142,6 +147,8 @@
> #define ATMEL_HLCDC_DMA_CHANNEL_DSCR_DONE BIT(2)
> #define ATMEL_HLCDC_DMA_CHANNEL_DSCR_OVERRUN BIT(3)
>
> +#define ATMEL_HLCDC_CLUT_SIZE 256
> +
> #define ATMEL_HLCDC_MAX_LAYERS 6
>
> /**
> @@ -259,6 +266,7 @@ struct atmel_hlcdc_layer_desc {
> int id;
> int regs_offset;
> int cfgs_offset;
> + int clut_offset;
> struct atmel_hlcdc_formats *formats;
> struct atmel_hlcdc_layer_cfg_layout layout;
> int max_width;
> @@ -414,6 +422,14 @@ static inline u32 atmel_hlcdc_layer_read_cfg(struct atmel_hlcdc_layer *layer,
> (cfgid * sizeof(u32)));
> }
>
> +static inline void atmel_hlcdc_layer_write_clut(struct atmel_hlcdc_layer *layer,
> + unsigned int c, u32 val)
> +{
> + atmel_hlcdc_layer_write_reg(layer,
> + layer->desc->clut_offset + c * sizeof(u32),
> + val);
> +}
> +
> static inline void atmel_hlcdc_layer_init(struct atmel_hlcdc_layer *layer,
> const struct atmel_hlcdc_layer_desc *desc,
> struct regmap *regmap)
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> index 1124200..b5bd9b0 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> @@ -83,6 +83,7 @@ drm_plane_state_to_atmel_hlcdc_plane_state(struct drm_plane_state *s)
> #define SUBPIXEL_MASK 0xffff
>
> static uint32_t rgb_formats[] = {
> + DRM_FORMAT_C8,
> DRM_FORMAT_XRGB4444,
> DRM_FORMAT_ARGB4444,
> DRM_FORMAT_RGBA4444,
> @@ -100,6 +101,7 @@ struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_formats = {
> };
>
> static uint32_t rgb_and_yuv_formats[] = {
> + DRM_FORMAT_C8,
> DRM_FORMAT_XRGB4444,
> DRM_FORMAT_ARGB4444,
> DRM_FORMAT_RGBA4444,
> @@ -128,6 +130,9 @@ struct atmel_hlcdc_formats atmel_hlcdc_plane_rgb_and_yuv_formats = {
> static int atmel_hlcdc_format_to_plane_mode(u32 format, u32 *mode)
> {
> switch (format) {
> + case DRM_FORMAT_C8:
> + *mode = ATMEL_HLCDC_C8_MODE;
> + break;
> case DRM_FORMAT_XRGB4444:
> *mode = ATMEL_HLCDC_XRGB4444_MODE;
> break;
> @@ -424,6 +429,29 @@ static void atmel_hlcdc_plane_update_format(struct atmel_hlcdc_plane *plane,
> ATMEL_HLCDC_LAYER_FORMAT_CFG, cfg);
> }
>
> +static void atmel_hlcdc_plane_update_clut(struct atmel_hlcdc_plane *plane)
> +{
> + struct drm_crtc *crtc = plane->base.crtc;
> + struct drm_color_lut *lut;
> + int idx;
> +
> + if (!crtc || !crtc->state)
> + return;
> +
> + if (!crtc->state->color_mgmt_changed || !crtc->state->gamma_lut)
> + return;
> +
> + lut = (struct drm_color_lut *)crtc->state->gamma_lut->data;
> +
> + for (idx = 0; idx < ATMEL_HLCDC_CLUT_SIZE; idx++, lut++) {
> + u32 val = ((lut->red << 8) & 0xff0000) |
> + (lut->green & 0xff00) |
> + (lut->blue >> 8);
> +
> + atmel_hlcdc_layer_write_clut(&plane->layer, idx, val);
> + }
> +}
> +
> static void atmel_hlcdc_plane_update_buffers(struct atmel_hlcdc_plane *plane,
> struct atmel_hlcdc_plane_state *state)
> {
> @@ -768,6 +796,7 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
> atmel_hlcdc_plane_update_pos_and_size(plane, state);
> atmel_hlcdc_plane_update_general_settings(plane, state);
> atmel_hlcdc_plane_update_format(plane, state);
> + atmel_hlcdc_plane_update_clut(plane);
> atmel_hlcdc_plane_update_buffers(plane, state);
> atmel_hlcdc_plane_update_disc_area(plane, state);
>
> --
> 2.1.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
