On 06/06/2017 06:28 PM, Tomi Valkeinen wrote:
On 06/06/17 15:48, Boris Brezillon wrote:
Okay. Thanks for the clarification. Can you confirm that this version
is correct?
dsi@xxx {
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
dpi_in: port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
endpoint@0 {
remote-endpoint = <&dpi_out>;
};
};
dsi_out: port@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
dsi_out_vc0: endpoint@0 {
reg = <0>;
remote-endpoint = <&dsi_panel0_in>;
};
dsi_out_vc1: endpoint@1 {
reg = <1>;
remote-endpoint = <&dsi_panel1_in>;
};
};
};
panel@0 {
compatible = "...";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
dsi_panel0_in: endpoint@0 {
reg = <0>;
remote-endpoint = <&dsi_out_vc0>;
};
};
};
panel@1 {
compatible = "...";
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
dsi_panel1_in: endpoint@0 {
reg = <0>;
remote-endpoint = <&dsi_out_vc1>;
};
};
};
};
Looks correct to me. I think it can be a bit shorter though:
- You don't need #address-cells and #size-cells for all. I think those
are inherited from the parent.
- If there's just one port and one endpoint, you can leave the 'reg'
out, as it's considered to be 0 by default.
So for the panel, you can have just:
port {
dsi_panel1_in: endpoint {
remote-endpoint = <&dsi_out_vc1>;
};
};
Looks good to me too.
Thanks,
Archit
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
