Add device-tree binding documentation for the 1.44", 1.9", 2.0" and 2.7"
display panels.
Signed-off-by: Noralf Trønnes <noralf@xxxxxxxxxxx>
---
.../devicetree/bindings/display/repaper.txt | 52 ++++++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/repaper.txt
diff --git a/Documentation/devicetree/bindings/display/repaper.txt b/Documentation/devicetree/bindings/display/repaper.txt
new file mode 100644
index 0000000..f5f9f9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/repaper.txt
@@ -0,0 +1,52 @@
+Pervasive Displays RePaper branded e-ink displays
+
+Required properties:
+- compatible: "pervasive,e1144cs021" for 1.44" display
+ "pervasive,e1190cs021" for 1.9" display
+ "pervasive,e2200cs021" for 2.0" display
+ "pervasive,e2271cs021" for 2.7" display
+
+- panel-on-gpios: Timing controller power control
+- discharge-gpios: Discharge control
+- reset-gpios: RESET pin
+- busy-gpios: BUSY pin
+
+Required property for e2271cs021:
+- border-gpios: Border control
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional property:
+- pervasive,thermal-zone: name of thermometer's thermal zone
+
+Example:
+
+ display_temp: lm75@48 {
+ compatible = "lm75b";
+ reg = <0x48>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermal-zones {
+ display {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&display_temp>;
+ };
+ };
+
+ papirus27@0{
+ compatible = "pervasive,e2271cs021";
+ reg = <0>;
+
+ spi-max-frequency = <8000000>;
+
+ panel-on-gpios = <&gpio 23 0>;
+ border-gpios = <&gpio 14 0>;
+ discharge-gpios = <&gpio 15 0>;
+ reset-gpios = <&gpio 24 0>;
+ busy-gpios = <&gpio 25 0>;
+
+ pervasive,thermal-zone = "display";
+ };
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
