On 01-06-2017 23:30, Russell King - ARM Linux wrote:
> On Thu, Jun 01, 2017 at 01:53:21AM +0100, Jose Abreu wrote:
>> Hi Russell,
>>
>>
>> On 30-05-2017 15:23, Russell King wrote:
>>> +static int dw_hdmi_cec_transmit(struct cec_adapter *adap, u8 attempts,
>>> + u32 signal_free_time, struct cec_msg *msg)
>>> +{
>>> + struct dw_hdmi_cec *cec = adap->priv;
>>> + unsigned i;
>>> +
>>> + cec->retries = attempts;
>> I think you should check first if CEC engine is in normal
>> operation mode, as a safety measure.
> I'm not sure what you mean there, because the iMX6 manuals don't mention
> anything about that. The only "modes" it talks about is initiator mode
> and follower mode. Moreover, there's nothing in what was FSL's driver
> that hints at that either.
>
> Maybe you could provide some further technical information on this
> point?
>
You should check that CEC is: not in standy, acknowledges
broadcast messages, signal free time is 5bit period, and not lost
arbitration, which basically means CEC_CTRL must be 0x2 and
IH_CEC_STAT0 must not have ARB_LOST set. I do know you set 0x3 at
the end of this function but according to all the docs I have you
must first set 0x2 before writing message.
Best regards,
Jose Miguel Abreu
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
