Re: [PATCH v2 05/11] drm: create hdmi output property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Regards

Shashank


On 5/30/2017 10:06 PM, Ville Syrjälä wrote:
On Tue, May 30, 2017 at 05:43:44PM +0530, Shashank Sharma wrote:
HDMI displays can support various output types, based on
the color space and subsampling type. The possible
outputs from a HDMI 2.0 monitor could be:
  - RGB
  - YCBCR 444
  - YCBCR 422
  - YCBCR 420

This patch adds a drm property, using which, a userspace
I think we should add the 4:2:0 only mode support first since that
doesn't require new uapi. The uapi stuff probably needs more careful
thought as we might want to consider exposing more of the
colorimetry stuff supported by the HDMI infoframes, and DP MSA MISC
and VSC SDP.
I was coming from the opposite school of thought. I was thinking 420_only modes should be handled carefully, whereas 420_also doesnt need any uapi (This patch series contains
420_also and doesnt modify the UAPI) due to following reasons:

assume there is a mode 3840x2160@60 appears to be in 2 different EDIDs, in first EDID as a 420_only mode
and in other as 420_also mode.
- If we add a 420_also mode in the mode_list, userspace might pick it for the modeset as favorite, as most of the
 420 modes are 4k modes.
- Now, if userspace doesn't set the hdmi_output property to YCBCR420, and sends a modeset on this mode: - the modeset will be successful in case of a 420_also mode, as it can be supported in RGB/YUV444 also. - the modeset will fail in case of 420_only mode, as this mode cant be supported in any other hdmi output format.

In this case, addition of 420_only mode, in the connectors->modes list should be done, only when the driver is ready to handle the YCBCR420 output, or we have to inform userspace about these modes which need the hdmi_ouput property to
be set with the modeset, which might in turn need an uabi.

Does it make a case ?

- Shashank
can specify its preference, for the HDMI output type.
The output type enums are similar to the mentioned outputs
above. To handle various subsampling of YCBCR output types,
this property allows two special cases:
  - DRM_HDMI_OUTPUT_YCBCR_HQ
This indicates preferred output should be YCBCR output, with highest
subsampling rate by the source/sink, which can be typically:
  - ycbcr444
  - ycbcr422
  - ycbcr420
  - DRM_HDMI_OUTPUT_YCBCR_LQ
This indicates preferred output should be YCBCR output, with lowest
subsampling rate supported by source/sink, which can be:
  - ycbcr420
  - ycbcr422
  - ycbcr444

Default value of the property is set to 0 = RGB, so no changes if you
dont set the property.

V2: Added description for the new variable to address build warning

Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Jose Abreu <joabreu@xxxxxxxxxxxx>
Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
---
  drivers/gpu/drm/drm_atomic.c        |  2 ++
  drivers/gpu/drm/drm_atomic_helper.c |  4 ++++
  drivers/gpu/drm/drm_connector.c     | 32 ++++++++++++++++++++++++++++++++
  include/drm/drm_connector.h         | 18 ++++++++++++++++++
  include/drm/drm_mode_config.h       |  5 +++++
  5 files changed, 61 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index e163701..8c4e040 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1192,6 +1192,8 @@ int drm_atomic_connector_set_property(struct drm_connector *connector,
  		state->picture_aspect_ratio = val;
  	} else if (property == connector->scaling_mode_property) {
  		state->scaling_mode = val;
+	} else if (property == config->hdmi_output_property) {
+		state->hdmi_output = val;
  	} else if (connector->funcs->atomic_set_property) {
  		return connector->funcs->atomic_set_property(connector,
  				state, property, val);
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 636e561..86b1780 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -567,6 +567,10 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,
  			if (old_connector_state->link_status !=
  			    new_connector_state->link_status)
  				new_crtc_state->connectors_changed = true;
+
+			if (old_connector_state->hdmi_output !=
+			    new_connector_state->hdmi_output)
+				new_crtc_state->connectors_changed = true;
  		}
if (funcs->atomic_check)
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 5cd61af..f3c5928 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -227,6 +227,11 @@ int drm_connector_init(struct drm_device *dev,
  					      config->edid_property,
  					      0);
+ if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL)
+		drm_object_attach_property(&connector->base,
+					   config->hdmi_output_property,
+					   0);
+
  	drm_object_attach_property(&connector->base,
  				      config->dpms_property, 0);
@@ -617,6 +622,26 @@ static const struct drm_prop_enum_list drm_link_status_enum_list[] = {
  };
  DRM_ENUM_NAME_FN(drm_get_link_status_name, drm_link_status_enum_list)
+static const struct drm_prop_enum_list drm_hdmi_output_enum_list[] = {
+	{ DRM_HDMI_OUTPUT_DEFAULT_RGB, "output_rgb" },
+	{ DRM_HDMI_OUTPUT_YCBCR444, "output_ycbcr444" },
+	{ DRM_HDMI_OUTPUT_YCBCR422, "output_ycbcr422" },
+	{ DRM_HDMI_OUTPUT_YCBCR420, "output_ycbcr420" },
+	{ DRM_HDMI_OUTPUT_YCBCR_HQ, "output_ycbcr_high_subsampling" },
+	{ DRM_HDMI_OUTPUT_YCBCR_LQ, "output_ycbcr_low_subsampling" },
+	{ DRM_HDMI_OUTPUT_INVALID, "invalid_output" },
+};
+
+/**
+ * drm_get_hdmi_output_name - return a string for a given hdmi output enum
+ * @type: enum of output type
+ */
+const char *drm_get_hdmi_output_name(enum drm_hdmi_output_type type)
+{
+	return drm_hdmi_output_enum_list[type].name;
+}
+EXPORT_SYMBOL(drm_get_hdmi_output_name);
+
  /**
   * drm_display_info_set_bus_formats - set the supported bus formats
   * @info: display info to store bus formats in
@@ -789,6 +814,13 @@ int drm_connector_create_standard_properties(struct drm_device *dev)
  		return -ENOMEM;
  	dev->mode_config.link_status_property = prop;
+ prop = drm_property_create_enum(dev, 0, "hdmi_output_format",
+					drm_hdmi_output_enum_list,
+					ARRAY_SIZE(drm_hdmi_output_enum_list));
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.hdmi_output_property = prop;
+
  	return 0;
  }
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 49cc38c..f77f283 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -313,6 +313,17 @@ struct drm_tv_connector_state {
  	unsigned int hue;
  };
+/* HDMI output pixel format */
+enum drm_hdmi_output_type {
+	DRM_HDMI_OUTPUT_DEFAULT_RGB, /* default RGB */
+	DRM_HDMI_OUTPUT_YCBCR444, /* YCBCR 444 */
+	DRM_HDMI_OUTPUT_YCBCR422, /* YCBCR 422 */
+	DRM_HDMI_OUTPUT_YCBCR420, /* YCBCR 420 */
+	DRM_HDMI_OUTPUT_YCBCR_HQ, /* Highest subsampled YUV */
+	DRM_HDMI_OUTPUT_YCBCR_LQ, /* Lowest subsampled YUV */
+	DRM_HDMI_OUTPUT_INVALID, /* Guess what ? */
+};
+
  /**
   * struct drm_connector_state - mutable connector state
   * @connector: backpointer to the connector
@@ -357,6 +368,12 @@ struct drm_connector_state {
  	 * upscaling, mostly used for built-in panels.
  	 */
  	unsigned int scaling_mode;
+
+	/**
+	 * @hdmi_output: Connector property to control the
+	 * HDMI output mode (RGB/YCBCR444/422/420).
+	 */
+	enum drm_hdmi_output_type hdmi_output;
  };
/**
@@ -976,6 +993,7 @@ static inline void drm_connector_unreference(struct drm_connector *connector)
const char *drm_get_connector_status_name(enum drm_connector_status status);
  const char *drm_get_subpixel_order_name(enum subpixel_order order);
+const char *drm_get_hdmi_output_name(enum drm_hdmi_output_type type);
  const char *drm_get_dpms_name(int val);
  const char *drm_get_dvi_i_subconnector_name(int val);
  const char *drm_get_dvi_i_select_name(int val);
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 4298171..1887261 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -740,6 +740,11 @@ struct drm_mode_config {
  	 * the position of the output on the host's screen.
  	 */
  	struct drm_property *suggested_y_property;
+	/**
+	 * @hdmi_output_property: output pixel format from HDMI display
+	 * Default is set for RGB
+	 */
+	struct drm_property *hdmi_output_property;
/* dumb ioctl parameters */
  	uint32_t preferred_depth, prefer_shadow;
--
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux