Both TCON channels need to have the resolution doubled, since the size the hardware is going to use is whatever we put in the register divided by two. However, we handle it differently for the two channels: in the channel 0, our register access macro does the multiplication of the value passed as paremeter, while in the channel 1, the macro doesn't do this, and we need to do it before calling it. Make this consistent by aligning the channel 0 with the channel 1 behaviour. Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> Acked-by: Chen-Yu Tsai <wens@xxxxxxxx> --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 2 +- drivers/gpu/drm/sun4i/sun4i_tcon.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 931dd374552e..62e254aedb57 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -194,7 +194,7 @@ void sun4i_tcon0_mode_set(struct sun4i_tcon *tcon, /* Set vertical display timings */ regmap_write(tcon->regs, SUN4I_TCON0_BASIC2_REG, - SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal) | + SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) | SUN4I_TCON0_BASIC2_V_BACKPORCH(bp)); /* Set Hsync and Vsync length */ diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h index f60e0b4c6db8..e3c50ecdcd04 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h @@ -52,7 +52,7 @@ #define SUN4I_TCON0_BASIC1_H_BACKPORCH(bp) (((bp) - 1) & 0xfff) #define SUN4I_TCON0_BASIC2_REG 0x50 -#define SUN4I_TCON0_BASIC2_V_TOTAL(total) ((((total) * 2) & 0x1fff) << 16) +#define SUN4I_TCON0_BASIC2_V_TOTAL(total) (((total) & 0x1fff) << 16) #define SUN4I_TCON0_BASIC2_V_BACKPORCH(bp) (((bp) - 1) & 0xfff) #define SUN4I_TCON0_BASIC3_REG 0x54 -- git-series 0.9.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
