On Thu, 11 May 2017 11:31:25 -0700
Eric Anholt <eric@xxxxxxxxxx> wrote:
> Avoids a bunch of connector boilerplate. Note that this causes panel
> prepare() to be moved before mtk_dsi_poweron() and unprepare() to be
> after poweroff(). I think this is the expected usage of the panel API
> (enable should be when you do things that require the link to be
> brought up), but there may be issues here.
>
> Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> ---
>
> Note that I haven't tested this change, and am not committed to this
> patch. It's just an optional cleanup, if it works for you.
>
> drivers/gpu/drm/mediatek/mtk_dsi.c | 125 ++++---------------------------------
> 1 file changed, 13 insertions(+), 112 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 808b995a990f..764bd8b9c256 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -160,7 +160,6 @@ struct mtk_dsi {
> struct device *dev;
> struct mipi_dsi_host host;
> struct drm_encoder encoder;
> - struct drm_connector conn;
> struct drm_panel *panel;
> struct drm_bridge *bridge;
> struct phy *phy;
> @@ -188,11 +187,6 @@ static inline struct mtk_dsi *encoder_to_dsi(struct drm_encoder *e)
> return container_of(e, struct mtk_dsi, encoder);
> }
>
> -static inline struct mtk_dsi *connector_to_dsi(struct drm_connector *c)
> -{
> - return container_of(c, struct mtk_dsi, conn);
> -}
> -
> static inline struct mtk_dsi *host_to_dsi(struct mipi_dsi_host *h)
> {
> return container_of(h, struct mtk_dsi, host);
> @@ -603,16 +597,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
> mtk_dsi_lane0_ulp_mode_leave(dsi);
> mtk_dsi_clk_hs_mode(dsi, 0);
>
> - if (dsi->panel) {
> - if (drm_panel_prepare(dsi->panel)) {
> - DRM_ERROR("failed to prepare the panel\n");
> - goto err_disable_digital_clk;
> - }
> - }
> -
> return 0;
> -err_disable_digital_clk:
> - clk_disable_unprepare(dsi->digital_clk);
> err_disable_engine_clk:
> clk_disable_unprepare(dsi->engine_clk);
> err_phy_power_off:
> @@ -630,15 +615,7 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
> if (--dsi->refcount != 0)
> return;
>
> - if (!mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500)) {
> - if (dsi->panel) {
> - if (drm_panel_unprepare(dsi->panel)) {
> - DRM_ERROR("failed to unprepare the panel\n");
> - return;
> - }
> - }
> - }
> -
> + mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500);
> mtk_dsi_reset_engine(dsi);
> mtk_dsi_lane0_ulp_mode_enter(dsi);
> mtk_dsi_clk_ulp_mode_enter(dsi);
> @@ -669,19 +646,9 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi)
>
> mtk_dsi_start(dsi);
>
> - if (dsi->panel) {
> - if (drm_panel_enable(dsi->panel)) {
> - DRM_ERROR("failed to enable the panel\n");
> - goto err_dsi_power_off;
> - }
> - }
> -
> dsi->enabled = true;
>
> return;
> -err_dsi_power_off:
> - mtk_dsi_stop(dsi);
> - mtk_dsi_poweroff(dsi);
> }
>
> static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
> @@ -689,13 +656,6 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
> if (!dsi->enabled)
> return;
>
> - if (dsi->panel) {
> - if (drm_panel_disable(dsi->panel)) {
> - DRM_ERROR("failed to disable the panel\n");
> - return;
> - }
> - }
> -
> mtk_dsi_stop(dsi);
> mtk_dsi_poweroff(dsi);
>
> @@ -750,13 +710,6 @@ static void mtk_dsi_encoder_enable(struct drm_encoder *encoder)
> mtk_output_dsi_enable(dsi);
> }
>
> -static int mtk_dsi_connector_get_modes(struct drm_connector *connector)
> -{
> - struct mtk_dsi *dsi = connector_to_dsi(connector);
> -
> - return drm_panel_get_modes(dsi->panel);
> -}
> -
> static const struct drm_encoder_helper_funcs mtk_dsi_encoder_helper_funcs = {
> .mode_fixup = mtk_dsi_encoder_mode_fixup,
> .mode_set = mtk_dsi_encoder_mode_set,
> @@ -764,52 +717,7 @@ static const struct drm_encoder_helper_funcs mtk_dsi_encoder_helper_funcs = {
> .enable = mtk_dsi_encoder_enable,
> };
>
> -static const struct drm_connector_funcs mtk_dsi_connector_funcs = {
> - .dpms = drm_atomic_helper_connector_dpms,
> - .fill_modes = drm_helper_probe_single_connector_modes,
> - .destroy = drm_connector_cleanup,
> - .reset = drm_atomic_helper_connector_reset,
> - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> -};
> -
> -static const struct drm_connector_helper_funcs
> - mtk_dsi_connector_helper_funcs = {
> - .get_modes = mtk_dsi_connector_get_modes,
> -};
> -
> -static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi)
> -{
> - int ret;
> -
> - ret = drm_connector_init(drm, &dsi->conn, &mtk_dsi_connector_funcs,
> - DRM_MODE_CONNECTOR_DSI);
> - if (ret) {
> - DRM_ERROR("Failed to connector init to drm\n");
> - return ret;
> - }
> -
> - drm_connector_helper_add(&dsi->conn, &mtk_dsi_connector_helper_funcs);
> -
> - dsi->conn.dpms = DRM_MODE_DPMS_OFF;
> - drm_mode_connector_attach_encoder(&dsi->conn, &dsi->encoder);
> -
> - if (dsi->panel) {
> - ret = drm_panel_attach(dsi->panel, &dsi->conn);
> - if (ret) {
> - DRM_ERROR("Failed to attach panel to drm\n");
> - goto err_connector_cleanup;
> - }
> - }
> -
> - return 0;
> -
> -err_connector_cleanup:
> - drm_connector_cleanup(&dsi->conn);
> - return ret;
> -}
> -
> -static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi)
> +static int mtk_dsi_create_enc(struct drm_device *drm, struct mtk_dsi *dsi)
> {
> int ret;
>
> @@ -827,15 +735,10 @@ static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi)
> */
> dsi->encoder.possible_crtcs = 1;
>
> - /* If there's a bridge, attach to it and let it create the connector */
> ret = drm_bridge_attach(&dsi->encoder, dsi->bridge, NULL);
> if (ret) {
> DRM_ERROR("Failed to attach bridge to drm\n");
> -
> - /* Otherwise create our own connector and attach to a panel */
> - ret = mtk_dsi_create_connector(drm, dsi);
> - if (ret)
> - goto err_encoder_cleanup;
> + goto err_encoder_cleanup;
> }
>
> return 0;
> @@ -848,9 +751,8 @@ static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi)
> static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi)
> {
> drm_encoder_cleanup(&dsi->encoder);
> - /* Skip connector cleanup if creation was delegated to the bridge */
> - if (dsi->conn.dev)
> - drm_connector_cleanup(&dsi->conn);
> + if (dsi->panel)
> + drm_panel_bridge_remove(dsi->bridge);
> }
>
> static void mtk_dsi_ddp_start(struct mtk_ddp_comp *comp)
> @@ -881,20 +783,12 @@ static int mtk_dsi_host_attach(struct mipi_dsi_host *host,
> dsi->format = device->format;
> dsi->mode_flags = device->mode_flags;
>
> - if (dsi->conn.dev)
> - drm_helper_hpd_irq_event(dsi->conn.dev);
> -
> return 0;
> }
>
> static int mtk_dsi_host_detach(struct mipi_dsi_host *host,
> struct mipi_dsi_device *device)
> {
> - struct mtk_dsi *dsi = host_to_dsi(host);
> -
> - if (dsi->conn.dev)
> - drm_helper_hpd_irq_event(dsi->conn.dev);
> -
> return 0;
> }
>
> @@ -1062,7 +956,7 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
> goto err_ddp_comp_unregister;
> }
>
> - ret = mtk_dsi_create_conn_enc(drm, dsi);
> + ret = mtk_dsi_create_enc(drm, dsi);
> if (ret) {
> DRM_ERROR("Encoder create failed with %d\n", ret);
> goto err_unregister;
> @@ -1114,6 +1008,13 @@ static int mtk_dsi_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> + if (dsi->panel) {
> + dsi->bridge = drm_panel_bridge_add(dsi->panel,
> + DRM_MODE_CONNECTOR_DSI);
> + if (IS_ERR(dsi->bridge))
> + return PTR_ERR(dsi->bridge);
> + }
> +
> dsi->engine_clk = devm_clk_get(dev, "engine");
> if (IS_ERR(dsi->engine_clk)) {
> ret = PTR_ERR(dsi->engine_clk);
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
