On Tue, 2017-05-09 at 16:40 -0700, Puthikorn Voravootivat wrote:
> Add option to allow choosing how to adjust brightness if
> panel supports both PWM pin and AUX channel.
>
> Signed-off-by: Puthikorn Voravootivat <puthik@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_params.c | 8 +++++---
> drivers/gpu/drm/i915/i915_params.h | 2 +-
> drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 23 ++++++++++++++++++-----
> 3 files changed, 24 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
> index b6a7e363d076..13cf3f1572ab 100644
> --- a/drivers/gpu/drm/i915/i915_params.c
> +++ b/drivers/gpu/drm/i915/i915_params.c
> @@ -63,7 +63,7 @@ struct i915_params i915 __read_mostly = {
> .huc_firmware_path = NULL,
> .enable_dp_mst = true,
> .inject_load_failure = 0,
> - .enable_dpcd_backlight = false,
> + .enable_dpcd_backlight = -1,
> .enable_gvt = false,
> };
>
> @@ -246,9 +246,11 @@ MODULE_PARM_DESC(enable_dp_mst,
> module_param_named_unsafe(inject_load_failure, i915.inject_load_failure, uint, 0400);
> MODULE_PARM_DESC(inject_load_failure,
> "Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)");
> -module_param_named(enable_dpcd_backlight, i915.enable_dpcd_backlight, bool, 0600);
> +module_param_named(enable_dpcd_backlight, i915.enable_dpcd_backlight, int, 0600);
> MODULE_PARM_DESC(enable_dpcd_backlight,
> - "Enable support for DPCD backlight control (default:false)");
> + "Enable support for DPCD backlight control "
> + "(-1:disable (default), 0:Use PWM pin if both supported, "
> + "1:Use DPCD if both supported");
>
> module_param_named(enable_gvt, i915.enable_gvt, bool, 0400);
> MODULE_PARM_DESC(enable_gvt,
> diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h
> index 34148cc8637c..ac02efce6e22 100644
> --- a/drivers/gpu/drm/i915/i915_params.h
> +++ b/drivers/gpu/drm/i915/i915_params.h
> @@ -66,7 +66,7 @@
> func(bool, verbose_state_checks); \
> func(bool, nuclear_pageflip); \
> func(bool, enable_dp_mst); \
> - func(bool, enable_dpcd_backlight); \
> + func(int, enable_dpcd_backlight); \
> func(bool, enable_gvt)
>
> #define MEMBER(T, member) T member
> diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
> index c22712762957..e82f7cb9a7af 100644
> --- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
> +++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
> @@ -167,21 +167,34 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector)
> /* Check the eDP Display control capabilities registers to determine if
> * the panel can support backlight control over the aux channel
> */
> - if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP &&
> - (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP) &&
> - !((intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_PIN_ENABLE_CAP) ||
> - (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP))) {
> + if ((intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP) &&
> + (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP)) {
> DRM_DEBUG_KMS("AUX Backlight Control Supported!\n");
> return true;
> }
> return false;
> }
>
> +static bool
> +intel_dp_pwm_pin_display_control_capable(struct intel_connector *connector)
> +{
> + struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);
> +
> + /* Check the eDP Display control capabilities registers to determine if
> + * the panel can support backlight control via BL_PWM_DIM eDP pin
> + */
> + return intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP;
This is not right. The bits in DPCD 0x702 don't mean anything if
DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP in 0x701 is not set.
-DK
> +}
> +
> int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
> {
> struct intel_panel *panel = &intel_connector->panel;
>
> - if (!i915.enable_dpcd_backlight)
> + if (i915.enable_dpcd_backlight == -1)
> + return -ENODEV;
> +
> + if (i915.enable_dpcd_backlight == 0 &&
> + intel_dp_pwm_pin_display_control_capable(intel_connector))
> return -ENODEV;
>
> if (!intel_dp_aux_display_control_capable(intel_connector))
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
