On 5/9/2017 10:30 PM, Jose Abreu wrote:
This patches makes use of the new mode_valid() callbacks introduced
previously to validate the full video pipeline when modesetting.
This calls the connector->mode_valid(), encoder->mode_valid(),
bridge->mode_valid() and crtc->mode_valid() so that we can
make sure that the mode will be accepted in every components.
Signed-off-by: Jose Abreu <joabreu@xxxxxxxxxxxx>
Cc: Carlos Palminha <palminha@xxxxxxxxxxxx>
Cc: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
Cc: Dave Airlie <airlied@xxxxxxxx>
Cc: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Cc: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
Changes v1->v2:
- Removed call to connector->mode_valid (Ville, Daniel)
- Change function name (Ville)
- Use for_each_new_connector_in_state (Ville)
- Do not validate if connector and mode didn't change (Ville)
- Use new helpers to call mode_valid
drivers/gpu/drm/drm_atomic_helper.c | 75 +++++++++++++++++++++++++++++++++++--
1 file changed, 72 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 8be9719..19d0ea1 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -452,6 +452,69 @@ static int handle_conflicting_encoders(struct drm_atomic_state *state,
return 0;
}
+static enum drm_mode_status mode_valid_path(struct drm_connector *connector,
+ struct drm_encoder *encoder,
+ struct drm_crtc *crtc,
+ struct drm_display_mode *mode)
+{
+ enum drm_mode_status ret;
+
+ ret = drm_encoder_mode_valid(encoder, mode);
+ if (ret != MODE_OK) {
+ DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] mode_valid() failed\n",
+ encoder->base.id, encoder->name);
+ return ret;
+ }
+
+ ret = drm_bridge_mode_valid(encoder->bridge, mode);
+ if (ret != MODE_OK) {
+ DRM_DEBUG_ATOMIC("[BRIDGE] mode_valid() failed\n");
+ return ret;
+ }
+
+ ret = drm_crtc_mode_valid(crtc, mode);
+ if (ret != MODE_OK) {
+ DRM_DEBUG_ATOMIC("[CRTC:%d:%s] mode_valid() failed\n",
+ crtc->base.id, crtc->name);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int
+mode_valid(struct drm_atomic_state *state)
+{
+ struct drm_connector_state *conn_state;
+ struct drm_connector *connector;
+ int i;
+
+ for_each_new_connector_in_state(state, connector, conn_state, i) {
+ struct drm_encoder *encoder = conn_state->best_encoder;
+ struct drm_crtc *crtc = conn_state->crtc;
+ struct drm_crtc_state *crtc_state;
+ enum drm_mode_status mode_status;
+ struct drm_display_mode *mode;
+
+ if (!crtc || !encoder)
+ continue;
+
+ crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+ if (!crtc_state)
+ continue;
+ if (!crtc_state->mode_changed && !crtc_state->connectors_changed)
+ continue;
+
+ mode = &crtc_state->mode;
+
+ mode_status = mode_valid_path(connector, encoder, crtc, mode);
+ if (mode_status != MODE_OK)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/**
* drm_atomic_helper_check_modeset - validate state object for modeset changes
* @dev: DRM device
@@ -466,13 +529,15 @@ static int handle_conflicting_encoders(struct drm_atomic_state *state,
* 2. &drm_connector_helper_funcs.atomic_check to validate the connector state.
* 3. If it's determined a modeset is needed then all connectors on the affected crtc
* crtc are added and &drm_connector_helper_funcs.atomic_check is run on them.
- * 4. &drm_bridge_funcs.mode_fixup is called on all encoder bridges.
- * 5. &drm_encoder_helper_funcs.atomic_check is called to validate any encoder state.
+ * 4. &drm_encoder_helper_funcs.mode_valid, &drm_bridge_funcs.mode_valid and
+ * &drm_crtc_helper_funcs.mode_valid are called on the affected components.
+ * 5. &drm_bridge_funcs.mode_fixup is called on all encoder bridges.
+ * 6. &drm_encoder_helper_funcs.atomic_check is called to validate any encoder state.
* This function is only called when the encoder will be part of a configured crtc,
* it must not be used for implementing connector property validation.
* If this function is NULL, &drm_atomic_encoder_helper_funcs.mode_fixup is called
* instead.
- * 6. &drm_crtc_helper_funcs.mode_fixup is called last, to fix up the mode with crtc constraints.
+ * 7. &drm_crtc_helper_funcs.mode_fixup is called last, to fix up the mode with crtc constraints.
*
* &drm_crtc_state.mode_changed is set when the input mode is changed.
* &drm_crtc_state.connectors_changed is set when a connector is added or
@@ -617,6 +682,10 @@ static int handle_conflicting_encoders(struct drm_atomic_state *state,
return ret;
}
+ ret = mode_valid(state);
+ if (ret)
+ return ret;
+
Since we've ensured that the modes won't fail, can mode_fixup() and
the mode_fixup() ops for crtc/bridge/encoders be assured to not fail
too? This is assuming that all drivers have moved to using the new
mode_valid() ops correctly.
Thanks,
Archit
return mode_fixup(state);
}
EXPORT_SYMBOL(drm_atomic_helper_check_modeset);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
