On Thu, May 4, 2017 at 7:48 PM, Icenowy Zheng <icenowy@xxxxxxx> wrote: > Allwinner V3s SoC have a display engine which have a different pipeline > with older SoCs. > > Add document for it (new compatibles and the new "mixer" part). > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> > Acked-by: Rob Herring <robh@xxxxxxxxxx> > --- > Changes in v4: > - Removed the refactor at TCON chapter. > Changes in v3: > - Remove the description of having a BE directly as allwinner,pipeline. > > .../bindings/display/sunxi/sun4i-drm.txt | 29 ++++++++++++++++++++-- > 1 file changed, 27 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > index 7acdbf14ae1c..33452884b96e 100644 > --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt > @@ -41,6 +41,7 @@ Required properties: > * allwinner,sun6i-a31-tcon > * allwinner,sun6i-a31s-tcon > * allwinner,sun8i-a33-tcon > + * allwinner,sun8i-v3s-tcon > - reg: base address and size of memory-mapped region > - interrupts: interrupt associated to this IP > - clocks: phandles to the clocks feeding the TCON. Three are needed: > @@ -62,7 +63,7 @@ Required properties: > second the block connected to the TCON channel 1 (usually the TV > encoder) > > -On SoCs other than the A33, there is one more clock required: > +On SoCs other than the A33 and V3s, there is one more clock required: > - 'tcon-ch1': The clock driving the TCON channel 1 > > DRC > @@ -148,6 +149,26 @@ Required properties: > Documentation/devicetree/bindings/media/video-interfaces.txt. The > first port should be the input endpoints, the second one the outputs > > +Display Engine 2.0 Mixer > +------------------------ > + > +The DE2 mixer have many functionalities, currently only layer blending is > +supported. > + > +Required properties: > + - compatible: value must be one of: > + * allwinner,sun8i-v3s-de2-mixer > + - reg: base address and size of the memory-mapped region. > + - clocks: phandles to the clocks feeding the frontend and backend > + * bus: the backend interface clock > + * ram: the backend DRAM clock You probably mean "mixer" here. > + - clock-names: the clock names mentioned above > + - resets: phandles to the reset controllers driving the backend And here. > + > +- ports: A ports node with endpoint definitions as defined in > + Documentation/devicetree/bindings/media/video-interfaces.txt. The > + first port should be the input endpoints, the second one the output > + > > Display Engine Pipeline > ----------------------- > @@ -162,9 +183,13 @@ Required properties: > * allwinner,sun6i-a31-display-engine > * allwinner,sun6i-a31s-display-engine > * allwinner,sun8i-a33-display-engine > + * allwinner,sun8i-v3s-display-engine > > - allwinner,pipelines: list of phandle to the display engine > - frontends available. > + pipeline entry point. For SoCs with original DE (currently > + all SoCs supported by display engine except V3s), this > + phandle should be a display frontend; for SoCs with DE2, > + this phandle should be a mixer. You could simplify this to "list of phandles to the display engine frontends (DE 1.0) or mixers (DE 2.0) available". Regards ChenYu > > Example: > > -- > 2.12.2 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx. > For more options, visit https://groups.google.com/d/optout. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
