On Thu, May 04, 2017 at 03:11:39PM +0100, Jose Abreu wrote:
> This changes the connector probe helper function to use the new
> encoder->mode_valid() and crtc->mode_valid() helper callbacks to
> validate the modes.
>
> The new callbacks are optional so the behaviour remains the same
> if they are not implemented. If they are, then the code loops
> through all the connector's encodersXcrtcs and calls the
> callback.
>
> If at least a valid encoderXcrtc combination is found which
> accepts the mode then the function returns MODE_OK.
>
> Signed-off-by: Jose Abreu <joabreu@xxxxxxxxxxxx>
> Cc: Carlos Palminha <palminha@xxxxxxxxxxxx>
> Cc: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
> Cc: Dave Airlie <airlied@xxxxxxxx>
> Cc: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> Cc: Archit Taneja <architt@xxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/drm_probe_helper.c | 71 +++++++++++++++++++++++++++++++++++---
> 1 file changed, 67 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> index 1b0c14a..bf19f82 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -80,6 +80,67 @@
> return MODE_OK;
> }
>
> +static enum drm_mode_status
> +drm_mode_validate_connector(struct drm_connector *connector,
> + struct drm_display_mode *mode)
> +{
> + const struct drm_connector_helper_funcs *connector_funcs =
> + connector->helper_private;
> + struct drm_device *dev = connector->dev;
> + uint32_t *ids = connector->encoder_ids;
> + enum drm_mode_status ret = MODE_OK;
> + unsigned int i;
> +
> + /* Step 1: Validate against connector */
> + if (connector_funcs && connector_funcs->mode_valid)
> + ret = connector_funcs->mode_valid(connector, mode);
> +
> + if (ret != MODE_OK)
> + return ret;
> +
> + /* Step 2: Validate against encoders and crtcs */
> + for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
> + struct drm_encoder *encoder = drm_encoder_find(dev, ids[i]);
> + const struct drm_encoder_helper_funcs *encoder_funcs;
> + struct drm_crtc *crtc;
> +
> + if (!encoder)
> + continue;
> +
> + encoder_funcs = encoder->helper_private;
> + if (encoder_funcs && encoder_funcs->mode_valid)
> + ret = encoder_funcs->mode_valid(encoder, mode);
> + else
> + ret = MODE_OK; /* encoder accepts everything */
Since you already added the drm_bridge_mode_valid() helper, maybe add one
for connectors, encoders and crtcs as well. Might keep the logic in this
function a bit more clear on account of not having to check for the
presence of the vfunc. Right now all three cases look slightly
different from one another.
> +
> + /* No point in continuing for crtc check as this encoder will
> + * not accept the mode anyway. If all encoders reject the mode
> + * then, at exit, ret will not be MODE_OK. */
> + if (ret != MODE_OK)
> + continue;
> +
> + drm_for_each_crtc(crtc, dev) {
> + const struct drm_crtc_helper_funcs *crtc_funcs;
> +
> + if (!drm_encoder_crtc_ok(encoder, crtc))
> + continue;
> +
> + crtc_funcs = crtc->helper_private;
> + if (!crtc_funcs || !crtc_funcs->mode_valid)
> + return MODE_OK; /* crtc accepts everything */
> +
> + ret = crtc_funcs->mode_valid(crtc, mode);
> + if (ret == MODE_OK)
> + /* If we get to this point there is at least
> + * one combination of encoder+crtc that works
> + * for this mode. Lets return now. */
> + return ret;
> + }
> + }
> +
> + return ret;
> +}
> +
> static int drm_helper_probe_add_cmdline_mode(struct drm_connector *connector)
> {
> struct drm_cmdline_mode *cmdline_mode;
> @@ -283,8 +344,10 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
> * (if specified)
> * - drm_mode_validate_flag() checks the modes against basic connector
> * capabilities (interlace_allowed,doublescan_allowed,stereo_allowed)
> - * - the optional &drm_connector_helper_funcs.mode_valid helper can perform
> - * driver and/or hardware specific checks
> + * - the optional &drm_connector_helper_funcs.mode_valid,
> + * &drm_crtc_helper_funcs.mode_valid and
> + * &drm_encoder_helper_funcs.mode_valid helpers can perform driver and/or
> + * hardware specific checks
> *
> * 5. Any mode whose status is not OK is pruned from the connector's modes list,
> * accompanied by a debug message indicating the reason for the mode's
> @@ -428,8 +491,8 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
> if (mode->status == MODE_OK)
> mode->status = drm_mode_validate_flag(mode, mode_flags);
>
> - if (mode->status == MODE_OK && connector_funcs->mode_valid)
> - mode->status = connector_funcs->mode_valid(connector,
> + if (mode->status == MODE_OK)
> + mode->status = drm_mode_validate_connector(connector,
> mode);
> }
>
> --
> 1.9.1
>
--
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
