On Wed, May 3, 2017 at 10:28 PM, Eric Anholt <eric@xxxxxxxxxx> wrote: >> From: Ong Hean Loong <hean.loong.ong@xxxxxxxxx> >> >> Hi, >> >> The new Intel Arria10 SOC FPGA devkit has a Display Port IP component >> which requires a new driver. This is a virtual driver in which the >> FGPA hardware would enable the Display Port based on the information >> and data provided from the DRM frame buffer from the OS. Basically all >> all information with reagrds to resolution and bits per pixel are >> pre-configured on the FPGA design and these information are fed to >> the driver via the device tree information as part of the hardware >> information. > > I started reviewing the code, but I want to make sure I understand > what's going on: > > This IP core isn't displaying contents from system memory on some sort > of actual physical display, right? It's a core that takes some input > video stream (not described in the DT or in this driver) and stores it > to memory? I assumed it's the input IP core in the linked pdf, i.e. the CVI (clocked video input). There's also a CVO (clocked video output), and that would indeed be a misfit for drm. Definitely need to clarify this (in the DT description). -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
