From: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
Date: Tue, 2 May 2017 21:54:49 +0200
Strings which did not contain data format specifications should be put
into a sequence. Thus use the corresponding function "seq_puts".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/radeon/r100.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index c31e660e35db..09b88738aa07 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -2992,19 +2992,19 @@ static int r100_debugfs_cp_csq_fifo(struct seq_file *m, void *data)
seq_printf(m, "Indirect2 wptr %u\n", ib2_wptr);
/* FIXME: 0, 128, 640 depends on fifo setup see cp_init_kms
* 128 = indirect1_start * 8 & 640 = indirect2_start * 8 */
- seq_printf(m, "Ring fifo:\n");
+ seq_puts(m, "Ring fifo:\n");
for (i = 0; i < 256; i++) {
WREG32(RADEON_CP_CSQ_ADDR, i << 2);
tmp = RREG32(RADEON_CP_CSQ_DATA);
seq_printf(m, "rfifo[%04d]=0x%08X\n", i, tmp);
}
- seq_printf(m, "Indirect1 fifo:\n");
+ seq_puts(m, "Indirect1 fifo:\n");
for (i = 256; i <= 512; i++) {
WREG32(RADEON_CP_CSQ_ADDR, i << 2);
tmp = RREG32(RADEON_CP_CSQ_DATA);
seq_printf(m, "ib1fifo[%04d]=0x%08X\n", i, tmp);
}
- seq_printf(m, "Indirect2 fifo:\n");
+ seq_puts(m, "Indirect2 fifo:\n");
for (i = 640; i < ib1_wptr; i++) {
WREG32(RADEON_CP_CSQ_ADDR, i << 2);
tmp = RREG32(RADEON_CP_CSQ_DATA);
--
2.12.2
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
