Re: [Intel-gfx] [PATCH v7 4/4] drm/dp: Track MST link bandwidth

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2017-04-25 at 09:51 +0200, Maarten Lankhorst wrote:
> On 21-04-17 07:51, Dhinakaran Pandiyan wrote:
> > From: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@xxxxxxxxx>
> >
> > Use the added helpers to track MST link bandwidth for atomic modesets.
> > Link bw is acquired in the ->atomic_check() phase when CRTCs are being
> > enabled with drm_atomic_find_vcpi_slots() instead of drm_find_vcpi_slots().
> > Similarly, link bw is released during ->atomic_check() with the connector
> > helper callback ->atomic_release() when CRTCs are disabled.
> >
> > v5: Implement connector->atomic_check() in place of atomic_release()
> > v4: Return an int from intel_dp_mst_atomic_release() (Maarten)
> > v3:
> >  Handled the case where ->atomic_release() is called more than once
> >  during an atomic_check() for the same state.
> > v2:
> >  Squashed atomic_release() implementation and caller (Daniel)
> >  Fixed logic for connector-crtc switching case (Daniel)
> >  Fixed logic for suspend-resume case.
> >
> > Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
> > Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> > Cc: Archit Taneja <architt@xxxxxxxxxxxxxx>
> > Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> > Cc: Harry Wentland <Harry.wentland@xxxxxxx>
> > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> > ---
> >  drivers/gpu/drm/i915/intel_dp_mst.c | 57 +++++++++++++++++++++++++++++++++----
> >  1 file changed, 51 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
> > index 5af22a7..20c557c 100644
> > --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> > +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> > @@ -39,9 +39,9 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
> >  	struct intel_dp *intel_dp = &intel_dig_port->dp;
> >  	struct intel_connector *connector =
> >  		to_intel_connector(conn_state->connector);
> > -	struct drm_atomic_state *state;
> > +	struct drm_atomic_state *state = pipe_config->base.state;
> >  	int bpp;
> > -	int lane_count, slots;
> > +	int lane_count, slots = 0;
> >  	const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
> >  	int mst_pbn;
> >  
> > @@ -63,24 +63,68 @@ static bool intel_dp_mst_compute_config(struct intel_encoder *encoder,
> >  	pipe_config->pipe_bpp = bpp;
> >  	pipe_config->port_clock = intel_dp_max_link_rate(intel_dp);
> >  
> > -	state = pipe_config->base.state;
> > -
> >  	if (drm_dp_mst_port_has_audio(&intel_dp->mst_mgr, connector->port))
> >  		pipe_config->has_audio = true;
> > -	mst_pbn = drm_dp_calc_pbn_mode(adjusted_mode->crtc_clock, bpp);
> >  
> > +	mst_pbn = drm_dp_calc_pbn_mode(adjusted_mode->crtc_clock, bpp);
> >  	pipe_config->pbn = mst_pbn;
> > -	slots = drm_dp_find_vcpi_slots(&intel_dp->mst_mgr, mst_pbn);
> >  
> >  	intel_link_compute_m_n(bpp, lane_count,
> >  			       adjusted_mode->crtc_clock,
> >  			       pipe_config->port_clock,
> >  			       &pipe_config->dp_m_n);
> >  
> > +	if (pipe_config->base.active) {
> Is this check needed? If so it needs a comment as to why.
> 
> I know that the output won't actually turn on, but if the crtc is configured vcpi slots should be allocated if possible.
> 
> Else the following will fail in the wrong place:
> 1. Configure CRTC with a valid mode and DP-MST connector, but set active=false. connectors_changed = true, mode_changed = true. Not enough VCPI slots to enable all crtc's at the same time now, but this returns OK.
> 2. Commit with active property set to true. There are too few vcpi slots to make this work, this atomic commit returns -EINVAL. This might happen on a different crtc than the newly configured one in stap 1, if they were all previously set to !active.
> 

I gave this more thought, what you are recommending is not allocating
vcpi for active false->true but instead doing it only for enable
false->true. The problem I see is encoder->compute_config() is called to
configure the link for a modeset with active=false->true transition. If
we don't want to allocate vcpi slots in this case, we should not be
doing other config. computations as well i.e., not call
encoder->compute_config() at all for active_changed. This means we
should complete this FIXME in intel_atomic_check()

 /* FIXME: For only active_changed we shouldn't need to do any
                 * state recomputation at all. */ 

Otoh if you want me to remove 'if (pipe_config->base.active)', we can do
this - 

a) allocate slots unconditionally in compute_config()
        intel_link_compute_m_n(bpp, lane_count,
                               adjusted_mode->crtc_clock,
                               pipe_config->port_clock,
                               &pipe_config->dp_m_n);

+       slots = drm_dp_atomic_find_vcpi_slots(state, &intel_dp->mst_mgr,
+                                             connector->port, mst_pbn);
+       if (slots < 0) {
+               DRM_DEBUG_KMS("failed finding vcpi slots:%d\n", slots);
+               return false;
+       }
        pipe_config->dp_m_n.tu = slots;

b) release slots on connectors_changed||mode_changed||active_changed. 
 
+       if (drm_atomic_crtc_needs_modeset(crtc_state) && slots > 0) {
+               struct drm_dp_mst_topology_mgr *mgr;
+               struct drm_encoder *old_encoder;
+
+               old_encoder = old_conn_state->best_encoder;
+               mgr = &enc_to_mst(old_encoder)->primary->dp.mst_mgr;
+
+               ret = drm_dp_atomic_release_vcpi_slots(state, mgr,
slots);

Full patch - https://pastebin.ubuntu.com/24469988/
This assumes encoder->compute_config() will be called only once for a
state.

-DK



> > +		slots = drm_dp_atomic_find_vcpi_slots(state, &intel_dp->mst_mgr,
> > +					      connector->port, mst_pbn);
> > +		if (slots < 0) {
> > +			DRM_DEBUG_KMS("failed finding vcpi slots:%d\n", slots);
> > +			return false;
> > +		}
> > +	}
> >  	pipe_config->dp_m_n.tu = slots;
> >  
> >  	return true;
> > +}
> >  
> > +static inline bool release_resources(struct drm_crtc_state *crtc_state)
> > +{
> > +	return (crtc_state->connectors_changed ||
> > +		crtc_state->mode_changed ||
> > +		(crtc_state->active_changed && !crtc_state->active));
> > +}
> > +
> > +static int intel_dp_mst_atomic_check(struct drm_connector *connector,
> > +		struct drm_connector_state *new_conn_state)
> > +{
> > +	struct drm_atomic_state *state = new_conn_state->state;
> > +	struct drm_connector_state *old_conn_state;
> > +	struct drm_crtc *old_crtc;
> > +	struct drm_crtc_state *crtc_state;
> > +	int slots, ret = 0;
> > +
> > +	old_conn_state = drm_atomic_get_old_connector_state(state, connector);
> > +	old_crtc = old_conn_state->crtc;
> > +	if (!old_crtc)
> > +		return 0;
> > +
> > +	crtc_state = drm_atomic_get_new_crtc_state(state, old_crtc);
> > +	slots = to_intel_crtc_state(crtc_state)->dp_m_n.tu;
> > +
> > +	if (release_resources(crtc_state) && slots > 0) {
> > +		struct drm_dp_mst_topology_mgr *mgr;
> > +		struct drm_encoder *old_encoder;
> > +
> > +		old_encoder = old_conn_state->best_encoder;
> > +		mgr = &enc_to_mst(old_encoder)->primary->dp.mst_mgr;
> > +
> > +		ret = drm_dp_atomic_release_vcpi_slots(state, mgr, slots);
> > +		if (ret)
> > +			DRM_DEBUG_KMS("failed releasing %d vcpi slots:%d\n", slots, ret);
> > +		else
> > +			to_intel_crtc_state(crtc_state)->dp_m_n.tu = 0;
> > +	}
> > +	return ret;
> >  }
> >  
> >  static void intel_mst_disable_dp(struct intel_encoder *encoder,
> > @@ -378,6 +422,7 @@ static const struct drm_connector_helper_funcs intel_dp_mst_connector_helper_fun
> >  	.mode_valid = intel_dp_mst_mode_valid,
> >  	.atomic_best_encoder = intel_mst_atomic_best_encoder,
> >  	.best_encoder = intel_mst_best_encoder,
> > +	.atomic_check = intel_dp_mst_atomic_check,
> >  };
> >  
> >  static void intel_dp_mst_encoder_destroy(struct drm_encoder *encoder)
> 
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux