Comment # 2
on bug 100800
from abittner@opensuse.org
with the kernel I have following [drm loglines: [ +0.011717] [drm] radeon kernel modesetting enabled. [ +0.000540] [drm] initializing kernel modesetting (SUMO 0x1002:0x964A 0x1043:0x84C8 0x00). [ +0.000016] [drm] register mmio base: 0xFEB00000 [ +0.000001] [drm] register mmio size: 262144 [ +0.000004] [drm] Detected VRAM RAM=512M, BAR=256M [ +0.000000] [drm] RAM width 32bits DDR [ +0.000024] [drm] radeon: 512M of VRAM memory ready [ +0.000001] [drm] radeon: 1024M of GTT memory ready. [ +0.000012] [drm] Loading SUMO Microcode [ +0.000051] [drm] Internal thermal controller without fan control [ +0.000035] [drm] Found smc ucode version: 0x00011200 [ +0.000080] [drm] radeon: dpm initialized [ +0.000114] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ +0.018205] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ +0.000002] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ +0.000001] [drm] Driver supports precise vblank timestamp query. [ +0.000025] [drm] radeon: irq initialized. [ +0.016359] [drm] ring test on 0 succeeded in 0 usecs [ +0.000006] [drm] ring test on 3 succeeded in 3 usecs [ +0.045683] [drm] ring test on 5 succeeded in 1 usecs [ +0.009934] [drm] UVD initialized successfully. [ +0.000385] [drm] ib test on ring 0 succeeded in 0 usecs [ +0.000044] [drm] ib test on ring 3 succeeded in 0 usecs [ +0.161967] [drm] ib test on ring 5 succeeded [ +0.010613] [drm] Radeon Display Connectors [ +0.000002] [drm] Connector 0: [ +0.000001] [drm] VGA-1 [ +0.000000] [drm] HPD2 [ +0.000002] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ +0.000000] [drm] Encoders: [ +0.000001] [drm] CRT1: INTERNAL_UNIPHY2 [ +0.000001] [drm] CRT1: NUTMEG [ +0.000000] [drm] Connector 1: [ +0.000001] [drm] HDMI-A-1 [ +0.000000] [drm] HPD1 [ +0.000001] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ +0.000001] [drm] Encoders: [ +0.000000] [drm] DFP1: INTERNAL_UNIPHY2 [ +0.000001] [drm] Connector 2: [ +0.000000] [drm] DP-1 [ +0.000001] [drm] HPD3 [ +0.000001] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ +0.000000] [drm] Encoders: [ +0.000001] [drm] DFP2: INTERNAL_UNIPHY [ +0.091523] [drm] fb mappable at 0xC0366000 [ +0.000003] [drm] vram apper at 0xC0000000 [ +0.000000] [drm] size 9216000 [ +0.000001] [drm] fb depth is 24 [ +0.000000] [drm] pitch is 7680 [ +4.944624] [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting [ +0.000028] [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing E262 (len 2585, WS 4, PS 4) @ 0xE94C [ +0.039430] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery reached max voltage [ +0.000030] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed [ +0.022498] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery reached max voltage [ +0.000086] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed [ +0.000704] [drm] Initialized radeon 2.49.0 20080528 for 0000:00:01.0 on minor 0 [ +0.039081] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery reached max voltage [ +0.000076] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed [ +0.021913] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery reached max voltage .... modinfo: filename: /lib/modules/4.11.0-rc8-1.g20b036c-default/kernel/drivers/gpu/drm/radeon/radeon.ko license: GPL and additional rights description: ATI Radeon author: Gareth Hughes, Keith Whitwell, others. .... srcversion: 50E9ACC7FC15ADCFBF5FE57 .... depends: drm,drm_kms_helper,ttm,i2c-algo-bit intree: Y vermagic: 4.11.0-rc8-1.g20b036c-default SMP preempt mod_unload modversions parm: no_wb:Disable AGP writeback for scratch registers (int) parm: modeset:Disable/Enable modesetting (int) parm: dynclks:Disable/Enable dynamic clocks (int) parm: r4xx_atom:Enable ATOMBIOS modesetting for R4xx (int) parm: vramlimit:Restrict VRAM for testing, in megabytes (int) parm: agpmode:AGP Mode (-1 == PCI) (int) parm: gartsize:Size of PCIE/IGP gart to setup in megabytes (32, 64, etc., -1 = auto) (int) parm: benchmark:Run benchmark (int) parm: test:Run tests (int) parm: connector_table:Force connector table (int) parm: tv:TV enable (0 = disable) (int) parm: audio:Audio enable (-1 = auto, 0 = disable, 1 = enable) (int) parm: disp_priority:Display Priority (0 = auto, 1 = normal, 2 = high) (int) parm: hw_i2c:hw i2c engine enable (0 = disable) (int) parm: pcie_gen2:PCIE Gen2 mode (-1 = auto, 0 = disable, 1 = enable) (int) parm: msi:MSI support (1 = enable, 0 = disable, -1 = auto) (int) parm: lockup_timeout:GPU lockup timeout in ms (default 10000 = 10 seconds, 0 = disable) (int) parm: fastfb:Direct FB access for IGP chips (0 = disable, 1 = enable) (int) parm: dpm:DPM support (1 = enable, 0 = disable, -1 = auto) (int) parm: aspm:ASPM support (1 = enable, 0 = disable, -1 = auto) (int) parm: runpm:PX runtime pm (1 = force enable, 0 = disable, -1 = PX only default) (int) parm: hard_reset:PCI config reset (1 = force enable, 0 = disable (default)) (int) parm: vm_size:VM address space size in gigabytes (default 4GB) (int) parm: vm_block_size:VM page table size in bits (default depending on vm_size) (int) parm: deep_color:Deep Color support (1 = enable, 0 = disable (default)) (int) parm: use_pflipirq:Pflip irqs for pageflip completion (0 = disable, 1 = as fallback, 2 = exclusive (default)) (int) parm: bapm:BAPM support (1 = enable, 0 = disable, -1 = auto) (int) parm: backlight:backlight support (1 = enable, 0 = disable, -1 = auto) (int) parm: auxch:Use native auxch experimental support (1 = enable, 0 = disable, -1 = auto) (int) parm: mst:DisplayPort MST experimental support (1 = enable, 0 = disable) (int) kernel rpm info: Name : kernel-default Version : 4.4.57 Release : 18.3.1 Architecture: x86_64 Install Date: Tue Apr 25 14:14:05 2017 Group : System/Kernel Size : 249253626 License : GPL-2.0 Signature : RSA/SHA256, Thu Mar 30 11:52:11 2017, Key ID b88b2fd43dbdc284 Source RPM : kernel-default-4.4.57-18.3.1.nosrc.rpm Build Date : Thu Mar 30 11:45:47 2017 Build Host : build33 Relocations : (not relocatable) Packager : http://bugs.opensuse.org Vendor : openSUSE URL : http://www.kernel.org/ Summary : The Standard Kernel Description : The standard kernel for both uniprocessor and multiprocessor systems. Source Timestamp: 2017-03-30 08:39:47 +0200 GIT Revision: 39c8557a065a772bd0cbd29c588122288a6c20b3 GIT Branch: openSUSE-42.2 Distribution: openSUSE Leap 42.2 Name : kernel-default Version : 4.11.rc8 Release : 1.1.g20b036c Architecture: x86_64 Install Date: Tue Apr 25 16:32:48 2017 Group : System/Kernel Size : 271704090 License : GPL-2.0 Signature : RSA/SHA256, Tue Apr 25 11:07:57 2017, Key ID eceef21003579c1d Source RPM : kernel-default-4.11.rc8-1.1.g20b036c.nosrc.rpm Build Date : Tue Apr 25 11:03:49 2017 Build Host : lamb75 Relocations : (not relocatable) Vendor : obs://build.opensuse.org/Kernel URL : http://www.kernel.org/ Summary : The Standard Kernel Description : The standard kernel for both uniprocessor and multiprocessor systems. Source Timestamp: 2017-04-24 22:43:58 +0200 GIT Revision: 20b036c0ffdc3161eafe968b14b2b2bb4b7c83bb GIT Branch: master Distribution: Kernel:HEAD
You are receiving this mail because:
- You are the assignee for the bug.
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
