The Allwinner A31/A31s SoCs have 2 display pipelines, as in 2 display
frontends, backends, and tcons each. The relationship between the
backends and tcons are 1:1, but the frontends can feed either backend.
Add device nodes and of graph nodes describing this relationship.
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 168 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 167 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 9c999d3788f6..dfcf64515d7f 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -232,7 +232,7 @@
de: display-engine {
compatible = "allwinner,sun6i-a31-display-engine";
- allwinner,pipelines = <&fe0>;
+ allwinner,pipelines = <&fe0>, <&fe1>;
status = "disabled";
};
@@ -289,6 +289,43 @@
};
};
+ tcon1: lcd-controller@01c0d000 {
+ compatible = "allwinner,sun6i-a31-tcon";
+ reg = <0x01c0d000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_AHB1_LCD1>;
+ reset-names = "lcd";
+ clocks = <&ccu CLK_AHB1_LCD1>,
+ <&ccu CLK_LCD1_CH0>,
+ <&ccu CLK_LCD1_CH1>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon1-pixel-clock";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon1_in_drc1: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc1_out_tcon1>;
+ };
+ };
+
+ tcon1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
@@ -896,6 +933,130 @@
reg = <0>;
remote-endpoint = <&be0_in_fe0>;
};
+
+ fe0_out_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_in_fe0>;
+ };
+ };
+ };
+ };
+
+ fe1: display-frontend@01e20000 {
+ compatible = "allwinner,sun6i-a31-display-frontend";
+ reg = <0x01e20000 0x20000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_FE1>, <&ccu CLK_FE1>,
+ <&ccu CLK_DRAM_FE1>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_AHB1_FE1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe1_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_fe1>;
+ };
+
+ fe1_out_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_in_fe1>;
+ };
+ };
+ };
+ };
+
+ be1: display-backend@01e40000 {
+ compatible = "allwinner,sun6i-a31-display-backend";
+ reg = <0x01e40000 0x10000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_BE1>, <&ccu CLK_BE1>,
+ <&ccu CLK_DRAM_BE1>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_AHB1_BE1>;
+
+ assigned-clocks = <&ccu CLK_BE1>;
+ assigned-clock-rates = <300000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be1_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be1>;
+ };
+
+ be1_in_fe1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&fe1_out_be1>;
+ };
+ };
+
+ be1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be1_out_drc1: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc1_in_be1>;
+ };
+ };
+ };
+ };
+
+ drc1: drc@01e50000 {
+ compatible = "allwinner,sun6i-a31-drc";
+ reg = <0x01e50000 0x10000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_DRC1>, <&ccu CLK_IEP_DRC1>,
+ <&ccu CLK_DRAM_DRC1>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_AHB1_DRC1>;
+
+ assigned-clocks = <&ccu CLK_IEP_DRC1>;
+ assigned-clock-rates = <300000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ drc1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ drc1_in_be1: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be1_out_drc1>;
+ };
+ };
+
+ drc1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ drc1_out_tcon1: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon1_in_drc1>;
+ };
};
};
};
@@ -926,6 +1087,11 @@
reg = <0>;
remote-endpoint = <&fe0_out_be0>;
};
+
+ be0_in_fe1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&fe1_out_be0>;
+ };
};
be0_out: port@1 {
--
2.11.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
