Re: [linux-sunxi] Re: [PATCH 2/8] ARM: sun4i: Add display blocks for the sun4i dtsi.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

If you want I work with a Allwinner A20 (my board are derived from OlinuXino-Micro-A20), and I will interest with LVDS function.

I use your patch but I have nothing to display on my screen.
You can see my work on https://github.com/Philippe12/linux-sunxi/tree/sun7i-A20-lvds
My hardware is good, it word with u-boot and a older kernel 3.4.104

I use a dlc screen (dlc0700DDG-T-11) my fault is probably on simple-panel information but I didn't seen were

If you can tell me some things to check.

Thank for your help
Best regards
Philippe FOUQUET


Le lundi 13 février 2017 17:46:48 UTC+1, Priit Laes a écrit :
On Mon, 2017-02-13 at 17:20 +0800, Chen-Yu Tsai wrote:
> On Mon, Feb 13, 2017 at 5:16 PM, Maxime Ripard
> <maxime...@free-electrons.com> wrote:
> > Hi,
> >
> > On Sat, Feb 11, 2017 at 07:43:59PM +0200, Priit Laes wrote:
> > > Added basic display pipeline consisting of tcon, display backend
> > > and
> > > frontend blocks.
> > >
> > > Signed-off-by: Priit Laes <pl...@xxxxxxxxx>
> > > ---
> > >  arch/arm/boot/dts/sun4i-a10.dtsi | 104
> > > +++++++++++++++++++++++++++++++++++++++
> > >  1 file changed, 104 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi
> > > b/arch/arm/boot/dts/sun4i-a10.dtsi
> > > index ba20b48..70991c9 100644
> > > --- a/arch/arm/boot/dts/sun4i-a10.dtsi
> > > +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
> > > @@ -779,6 +779,45 @@
> > >                       #size-cells = <0>;
> > >               };
> > >
> > > +             tcon0: lcd-controller@1c0c000 {
> > > +                     compatible = "allwinner,sun5i-a13-tcon";
> >
> > There's a few bits here and there that need to be setup differently
> > in
> > A10, so you cannot reuse that compatible (same thing for the
> > other).
> >
> > Also, I'd really like to have all the blocks listed here, and not
> > only
> > the first pipeline. Ideally, on the A10, the two pipelines should
> > be
> > enabled too.
>
> The display pipeline driver has to be fixed before that can happen
> though. And I haven't started to work on what I proposed yet. Though
> if someone wants to take over I can forward any design plans I have.

Well, my plan was to get at least minimum bits mainlined and then build
additional features on top.

Wens, it would be cool though, if you could share your plans.

Unfortunately I have only single A10 device (with LVDS and mini-HDMI)
but I don't actually have other LVDS-displays I could easily use with
A20 devices (I have CubieTruck and A20-Olinuxino Micro).

Päikest,
Priit :)
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux