From: Clint Taylor <clinton.a.taylor@xxxxxxxxx> Adding DPCD register definitions from the DP 1.3 specification for CEC over AUX support. Signed-off-by: Clint Taylor <clinton.a.taylor@xxxxxxxxx> --- include/drm/drm_dp_helper.h | 59 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index c0bd0d7..d188aff 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -603,6 +603,9 @@ #define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 0x2003 /* 1.2 */ #define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI1 0x2004 /* 1.2 */ +# define RX_GTC_MSTR_REQ_STATUS_CHANGE (1 << 0) +# define LOCK_ACQUISITION_REQUEST (1 << 1) +# define CEC_IRQ (1 << 2) #define DP_LINK_SERVICE_IRQ_VECTOR_ESI0 0x2005 /* 1.2 */ @@ -636,6 +639,62 @@ # define DP_VSC_EXT_CEA_SDP_SUPPORTED (1 << 6) /* DP 1.4 */ # define DP_VSC_EXT_CEA_SDP_CHAINING_SUPPORTED (1 << 7) /* DP 1.4 */ +/* HDMI CEC tunneling over AUX DP 1.3 section 5.3.3.3.1 DPCD 1.4+ */ +#define CEC_TUNNELING_CAPABILITY 0x3000 +# define CEC_TUNNELING_CAPABLE (1 << 0) +# define CEC_SNOOPING_CAPABLE (1 << 1) +# define CEC_MULTIPLE_LA_CAPABLE (1 << 2) + +#define CEC_TUNNELING_CONTROL 0x3001 +# define CEC_TUNNELING_ENABLE (1 << 0) +# define CEC_SNOOPING_ENABLE (1 << 1) + +#define CEC_RX_MESSAGE_INFO 0x3002 +# define CEC_RX_MESSAGE_LEN_MASK (0xf << 0) +# define CEC_RX_MESSAGE_LEN_SHIFT 0 +# define CEC_RX_MESSAGE_HPD_STATE (1 << 4) +# define CEC_RX_MESSAGE_HPD_LOST (1 << 5) +# define CEC_RX_MESSAGE_ACKED (1 << 6) +# define CEC_RX_MESSAGE_ENDED (1 << 7) + +#define CEC_TX_MESSAGE_INFO 0x3003 +# define CEC_TX_MESSAGE_LEN_MASK (0xf << 0) +# define CEC_TX_MESSAGE_LEN_SHIFT 0 +# define CEC_TX_RETRY_COUNT_MASK (0x7 << 4) +# define CEC_TX_RETRY_COUNT_SHIFT 4 +# define CEC_TX_MESSAGE_SEND (1 << 7) + +#define CEC_TUNNELING_IRQ_FLAGS 0x3004 +# define CEC_RX_MESSAGE_INFO_VALID (1 << 0) +# define CEC_RX_MESSAGE_OVERFLOW (1 << 1) +# define CEC_TX_MESSAGE_SENT (1 << 4) +# define CEC_TX_LINE_ERROR (1 << 5) +# define CEC_TX_ADDRESS_NACK_ERROR (1 << 6) +# define CEC_TX_DATA_NACK_ERROR (1 << 7) + +#define CEC_LOGICAL_ADDRESS_MASK 0x300E /* 0x300F word */ +# define CEC_LOGICAL_ADDRESS_0 (1 << 0) +# define CEC_LOGICAL_ADDRESS_1 (1 << 1) +# define CEC_LOGICAL_ADDRESS_2 (1 << 2) +# define CEC_LOGICAL_ADDRESS_3 (1 << 3) +# define CEC_LOGICAL_ADDRESS_4 (1 << 4) +# define CEC_LOGICAL_ADDRESS_5 (1 << 5) +# define CEC_LOGICAL_ADDRESS_6 (1 << 6) +# define CEC_LOGICAL_ADDRESS_7 (1 << 7) +#define CEC_LOGICAL_ADDRESS_MASK_2 0x300F /* 0x300E word */ +# define CEC_LOGICAL_ADDRESS_8 (1 << 0) +# define CEC_LOGICAL_ADDRESS_9 (1 << 1) +# define CEC_LOGICAL_ADDRESS_10 (1 << 2) +# define CEC_LOGICAL_ADDRESS_11 (1 << 3) +# define CEC_LOGICAL_ADDRESS_12 (1 << 4) +# define CEC_LOGICAL_ADDRESS_13 (1 << 5) +# define CEC_LOGICAL_ADDRESS_14 (1 << 6) +# define CEC_LOGICAL_ADDRESS_15 (1 << 7) + +#define CEC_RX_MESSAGE_BUFFER 0x3010 +#define CEC_TX_MESSAGE_BUFFER 0x3020 +#define CEC_MESSAGE_BUFFER_LENGTH 0x10 + /* DP 1.2 Sideband message defines */ /* peer device type - DP 1.2a Table 2-92 */ #define DP_PEER_DEVICE_NONE 0x0 -- 1.7.9.5 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
