i915 invert backlight brightness

[Georgios Dakidis <georgiosdakidis@xxxxxxxxxxxxxx>]

lspci -n

00:02.0 0300: 8086:0f31 (rev 0e)

lspci -nn

00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0e)

dmesg ( with drm.debug=14)

[    0.000000] Linux version 4.10.9-1-ARCH (builduser@tobias) (gcc version 6.3.1 20170306 (GCC) ) #1 SMP PREEMPT Sat Apr 8 12:39:59 CEST 2017

[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=50e93c6c-d398-419e-90cc-26a0c6621a9d rw quiet i8042.nomux=1 i8042.reset psmouse.resync_time=1 drm.debug=14

[    0.000000] x86/fpu: Legacy x87 FPU detected.

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable

[    0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable

[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable

[    0.000000] BIOS-e820: [mem 0x000000001f000000-0x00000000200fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000078998fff] usable

[    0.000000] BIOS-e820: [mem 0x0000000078999000-0x0000000078a28fff] type 20

[    0.000000] BIOS-e820: [mem 0x0000000078a29000-0x00000000792a8fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000792a9000-0x00000000793a8fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000793a9000-0x00000000793e8fff] ACPI data

[    0.000000] BIOS-e820: [mem 0x00000000793e9000-0x0000000079ffffff] usable

[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] efi: EFI v2.40 by INSYDE Corp.

[    0.000000] efi:  ACPI 2.0=0x793e8014  ESRT=0x78b75618  SMBIOS=0x78c62000

[    0.000000] SMBIOS 2.7 present.

[    0.000000] DMI: Plaisio Turbo X/Turbo X, BIOS 25.04 03/17/2014

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-BFFFF uncachable

[    0.000000]   C0000-FFFFF write-protect

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 0FFD00000 mask FFFC00000 write-protect

[    0.000000]   1 base 000000000 mask F80000000 write-back

[    0.000000]   2 base 07C000000 mask FFC000000 uncachable

[    0.000000]   3 base 07B000000 mask FFF000000 uncachable

[    0.000000]   4 base 07AE00000 mask FFFE00000 uncachable

[    0.000000]   5 disabled

[    0.000000]   6 disabled

[    0.000000]   7 disabled

[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 

[    0.000000] esrt: Reserving ESRT space from 0x0000000078b75618 to 0x0000000078b75650.

[    0.000000] Scanning 1 areas for low memory corruption

[    0.000000] Base memory trampoline at [ffff88000007c000] 7c000 size 24576

[    0.000000] BRK [0x02d5f000, 0x02d5ffff] PGTABLE

[    0.000000] BRK [0x02d60000, 0x02d60fff] PGTABLE

[    0.000000] BRK [0x02d61000, 0x02d61fff] PGTABLE

[    0.000000] BRK [0x02d62000, 0x02d62fff] PGTABLE

[    0.000000] BRK [0x02d63000, 0x02d63fff] PGTABLE

[    0.000000] BRK [0x02d64000, 0x02d64fff] PGTABLE

[    0.000000] RAMDISK: [mem 0x372c7000-0x3795afff]

[    0.000000] ACPI: Early table checksum verification disabled

[    0.000000] ACPI: RSDP 0x00000000793E8014 000024 (v02 render)

[    0.000000] ACPI: XSDT 0x00000000793E8120 0000AC (v01 render renderpc 00000003      01000013)

[    0.000000] ACPI: FACP 0x00000000793E5000 00010C (v05 render renderpc 00000003 ACPI 00040000)

[    0.000000] ACPI: DSDT 0x00000000793D4000 00B075 (v02 render renderpc 00000003 ACPI 00040000)

[    0.000000] ACPI: FACS 0x0000000079372000 000040

[    0.000000] ACPI: UEFI 0x00000000793E7000 000236 (v01 render renderpc 00000001 ACPI 00040000)

[    0.000000] ACPI: MSDM 0x00000000793E6000 000055 (v03 render renderpc 00000001 ACPI 00040000)

[    0.000000] ACPI: HPET 0x00000000793E4000 000038 (v01 render renderpc 00000003 ACPI 00040000)

[    0.000000] ACPI: LPIT 0x00000000793E3000 000104 (v01 render renderpc 00000003 ACPI 00040000)

[    0.000000] ACPI: APIC 0x00000000793E2000 000084 (v03 render renderpc 00000003 ACPI 00040000)

[    0.000000] ACPI: MCFG 0x00000000793E1000 00003C (v01 render renderpc 00000003 ACPI 00040000)

[    0.000000] ACPI: SLIC 0x00000000793E0000 000176 (v01 render renderpc 00000003 ACPI 00040000)

[    0.000000] ACPI: SSDT 0x00000000793D3000 0005EC (v01 render CpuDptf  00000003 ACPI 00040000)

[    0.000000] ACPI: SSDT 0x00000000793D2000 0006DB (v01 render DptfTab  00000003 ACPI 00040000)

[    0.000000] ACPI: SSDT 0x00000000793D1000 000763 (v01 render CpuPm    00003000 ACPI 00040000)

[    0.000000] ACPI: SSDT 0x00000000793D0000 000290 (v01 render Cpu0Tst  00003000 ACPI 00040000)

[    0.000000] ACPI: SSDT 0x00000000793CF000 00017A (v01 render ApTst    00003000 ACPI 00040000)

[    0.000000] ACPI: UEFI 0x00000000793CE000 000042 (v01 render renderpc 00000000 ACPI 00040000)

[    0.000000] ACPI: SSDT 0x00000000793CD000 0003E6 (v01 render IsctTabl 00001000 ACPI 00040000)

[    0.000000] ACPI: FPDT 0x00000000793CC000 000044 (v01 render renderpc 00000002 ACPI 00040000)

[    0.000000] ACPI: BGRT 0x00000000793CB000 000038 (v01 render renderpc 00000001 ACPI 00040000)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] No NUMA configuration found

[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000079ffffff]

[    0.000000] NODE_DATA(0) allocated [mem 0x78703000-0x78707fff]

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.000000]   DMA32    [mem 0x0000000001000000-0x0000000079ffffff]

[    0.000000]   Normal   empty

[    0.000000]   Device   empty

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000006efff]

[    0.000000]   node   0: [mem 0x0000000000070000-0x0000000000085fff]

[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001effffff]

[    0.000000]   node   0: [mem 0x0000000020100000-0x0000000078998fff]

[    0.000000]   node   0: [mem 0x00000000793e9000-0x0000000079ffffff]

[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff]

[    0.000000] On node 0 totalpages: 492596

[    0.000000]   DMA zone: 64 pages used for memmap

[    0.000000]   DMA zone: 23 pages reserved

[    0.000000]   DMA zone: 3972 pages, LIFO batch:0

[    0.000000]   DMA32 zone: 7744 pages used for memmap

[    0.000000]   DMA32 zone: 488624 pages, LIFO batch:31

[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable

[    0.000000] Reserving Intel graphics memory at 0x000000007b000000-0x000000007effffff

[    0.000000] ACPI: PM-Timer IO Port: 0x408

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])

[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000

[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs

[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

[    0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x00086000-0x0009ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x200fffff]

[    0.000000] PM: Registered nosave memory: [mem 0x78999000-0x78a28fff]

[    0.000000] PM: Registered nosave memory: [mem 0x78a29000-0x792a8fff]

[    0.000000] PM: Registered nosave memory: [mem 0x792a9000-0x793a8fff]

[    0.000000] PM: Registered nosave memory: [mem 0x793a9000-0x793e8fff]

[    0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns

[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1

[    0.000000] percpu: Embedded 35 pages/cpu @ffff880078400000 s103640 r8192 d31528 u524288

[    0.000000] pcpu-alloc: s103640 r8192 d31528 u524288 alloc=1*2097152

[    0.000000] pcpu-alloc: [0] 0 1 2 3

[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 484765

[    0.000000] Policy zone: DMA32

[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=50e93c6c-d398-419e-90cc-26a0c6621a9d rw quiet i8042.nomux=1 i8042.reset psmouse.resync_time=1 drm.debug=14

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] Calgary: detecting Calgary via BIOS EBDA area

[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[    0.000000] Memory: 1883268K/1970384K available (6367K kernel code, 1090K rwdata, 1984K rodata, 1292K init, 1032K bss, 87116K reserved, 0K cma-reserved)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000] Preemptible hierarchical RCU implementation.

[    0.000000] Build-time adjustment of leaf fanout to 64.

[    0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4

[    0.000000] NR_IRQS:8448 nr_irqs:1024 16

[    0.000000] Console: colour dummy device 80x25

[    0.000000] console [tty0] enabled

[    0.000000] tsc: Detected 2165.800 MHz processor

[    0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 4333.08 BogoMIPS (lpj=7219333)

[    0.000035] pid_max: default: 32768 minimum: 301

[    0.000055] ACPI: Core revision 20160930

[    0.016364] ACPI: 7 ACPI AML tables successfully acquired and loaded

[    0.017122] Security Framework initialized

[    0.017125] Yama: becoming mindful.

[    0.017320] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)

[    0.018177] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)

[    0.018581] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)

[    0.018587] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)

[    0.018989] CPU: Physical Processor ID: 0

[    0.018992] CPU: Processor Core ID: 0

[    0.018996] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'

[    0.018997] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)

[    0.019005] mce: CPU supports 6 MCE banks

[    0.019014] CPU0: Thermal monitoring enabled (TM1)

[    0.019019] process: using mwait in idle threads

[    0.019023] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0

[    0.019025] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0

[    0.019262] Freeing SMP alternatives memory: 24K

[    0.022517] ftrace: allocating 25114 entries in 99 pages

[    0.039836] smpboot: Max logical packages: 2

[    0.040791] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.073816] TSC deadline timer enabled

[    0.073820] smpboot: CPU0: Intel(R) Celeron(R) CPU  N2840  @ 2.16GHz (family: 0x6, model: 0x37, stepping: 0x8)

[    0.083846] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.

[    0.083862] ... version:                3

[    0.083863] ... bit width:              40

[    0.083864] ... generic registers:      2

[    0.083865] ... value mask:             000000ffffffffff

[    0.083866] ... max period:             0000007fffffffff

[    0.083867] ... fixed-purpose events:   3

[    0.083868] ... event mask:             0000000700000003

[    0.107421] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

[    0.113903] smp: Bringing up secondary CPUs ...

[    0.140641] x86: Booting SMP configuration:

[    0.140643] .... node  #0, CPUs:      #1

[    0.224162] smp: Brought up 1 node, 2 CPUs

[    0.224166] smpboot: Total of 2 processors activated (8669.92 BogoMIPS)

[    0.224899] devtmpfs: initialized

[    0.225028] x86/mm: Memory block size: 128MB

[    0.231452] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes)

[    0.231455] PM: Registering ACPI NVS region [mem 0x792a9000-0x793a8fff] (1048576 bytes)

[    0.231579] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns

[    0.231591] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.231670] pinctrl core: initialized pinctrl subsystem

[    0.231742] RTC time: 20:10:57, date: 04/15/17

[    0.231923] NET: Registered protocol family 16

[    0.240744] cpuidle: using governor ladder

[    0.254088] cpuidle: using governor menu

[    0.254091] PCCT header not found.

[    0.254143] ACPI: bus type PCI registered

[    0.254145] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.254259] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)

[    0.254339] PCI: not using MMCONFIG

[    0.254342] PCI: Using configuration type 1 for base access

[    0.270986] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[    0.271445] ACPI: Added _OSI(Module Device)

[    0.271446] ACPI: Added _OSI(Processor Device)

[    0.271448] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.271449] ACPI: Added _OSI(Processor Aggregator Device)

[    0.285252] ACPI: Dynamic OEM Table Load:

[    0.285265] ACPI: SSDT 0xFFFF880073DED800 000440 (v01 PmRef  Cpu0Ist  00003000 INTL 20121220)

[    0.285642] ACPI: Dynamic OEM Table Load:

[    0.285652] ACPI: SSDT 0xFFFF880073DEC000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20121220)

[    0.286460] ACPI: Dynamic OEM Table Load:

[    0.286470] ACPI: SSDT 0xFFFF880073EDCA00 00015F (v01 PmRef  ApIst    00003000 INTL 20121220)

[    0.286819] ACPI: Dynamic OEM Table Load:

[    0.286828] ACPI: SSDT 0xFFFF880073F0BB40 00008D (v01 PmRef  ApCst    00003000 INTL 20121220)

[    0.287790] ACPI : EC: EC started

[    0.541160] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC

[    0.541163] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.541166] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions

[    0.541167] ACPI: Interpreter enabled

[    0.541204] ACPI: (supports S0 S3 S4 S5)

[    0.541206] ACPI: Using IOAPIC for interrupt routing

[    0.541265] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)

[    0.542108] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources

[    0.542123] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.571124] ACPI: Power Resource [USBC] (on)

[    0.576530] ACPI: Power Resource [PLPE] (on)

[    0.576883] ACPI: Power Resource [PLPE] (on)

[    0.585199] ACPI: Power Resource [CLK0] (on)

[    0.585290] ACPI: Power Resource [CLK1] (on)

[    0.667906] ACPI: Power Resource [FN00] (off)

[    0.668940] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.668948] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.669029] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM

[    0.669049] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge

[    0.669622] PCI host bridge to bus 0000:00

[    0.669627] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]

[    0.669629] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]

[    0.669632] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]

[    0.669634] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

[    0.669636] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[    0.669639] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]

[    0.669641] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]

[    0.669643] pci_bus 0000:00: root bus resource [mem 0x80000000-0x909ffffe window]

[    0.669646] pci_bus 0000:00: root bus resource [bus 00-ff]

[    0.669657] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000

[    0.669833] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000

[    0.669846] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]

[    0.669857] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]

[    0.669867] pci 0000:00:02.0: reg 0x20: [io  0x3050-0x3057]

[    0.670047] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601

[    0.670065] pci 0000:00:13.0: reg 0x10: [io  0x3048-0x304f]

[    0.670075] pci 0000:00:13.0: reg 0x14: [io  0x305c-0x305f]

[    0.670084] pci 0000:00:13.0: reg 0x18: [io  0x3040-0x3047]

[    0.670093] pci 0000:00:13.0: reg 0x1c: [io  0x3058-0x305b]

[    0.670102] pci 0000:00:13.0: reg 0x20: [io  0x3020-0x303f]

[    0.670112] pci 0000:00:13.0: reg 0x24: [mem 0x90917000-0x909177ff]

[    0.670160] pci 0000:00:13.0: PME# supported from D3hot

[    0.670304] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330

[    0.670322] pci 0000:00:14.0: reg 0x10: [mem 0x90900000-0x9090ffff 64bit]

[    0.670384] pci 0000:00:14.0: PME# supported from D3hot D3cold

[    0.670494] pci 0000:00:14.0: System wakeup disabled by ACPI

[    0.670575] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000

[    0.670599] pci 0000:00:1a.0: reg 0x10: [mem 0x90800000-0x908fffff]

[    0.670612] pci 0000:00:1a.0: reg 0x14: [mem 0x90700000-0x907fffff]

[    0.670717] pci 0000:00:1a.0: PME# supported from D0 D3hot

[    0.670868] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300

[    0.670890] pci 0000:00:1b.0: reg 0x10: [mem 0x90910000-0x90913fff 64bit]

[    0.670964] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[    0.671109] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400

[    0.671184] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[    0.671265] pci 0000:00:1c.0: System wakeup disabled by ACPI

[    0.671338] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400

[    0.671401] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[    0.671485] pci 0000:00:1c.1: System wakeup disabled by ACPI

[    0.671556] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400

[    0.671618] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold

[    0.671699] pci 0000:00:1c.2: System wakeup disabled by ACPI

[    0.671771] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400

[    0.671834] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold

[    0.671915] pci 0000:00:1c.3: System wakeup disabled by ACPI

[    0.671991] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100

[    0.672200] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500

[    0.672233] pci 0000:00:1f.3: reg 0x10: [mem 0x90914000-0x9091401f]

[    0.672304] pci 0000:00:1f.3: reg 0x20: [io  0x3000-0x301f]

[    0.672617] pci 0000:01:00.0: [10ec:b723] type 00 class 0x028000

[    0.672640] pci 0000:01:00.0: reg 0x10: [io  0x2000-0x20ff]

[    0.672672] pci 0000:01:00.0: reg 0x18: [mem 0x90600000-0x90603fff 64bit]

[    0.672786] pci 0000:01:00.0: supports D1 D2

[    0.672789] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.672855] pci 0000:01:00.0: System wakeup disabled by ACPI

[    0.681156] pci 0000:00:1c.0: PCI bridge to [bus 01]

[    0.681161] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]

[    0.681165] pci 0000:00:1c.0:   bridge window [mem 0x90600000-0x906fffff]

[    0.681265] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000

[    0.681286] pci 0000:02:00.0: reg 0x10: [io  0x1000-0x10ff]

[    0.681314] pci 0000:02:00.0: reg 0x18: [mem 0x90500000-0x90500fff 64bit]

[    0.681332] pci 0000:02:00.0: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref]

[    0.681424] pci 0000:02:00.0: supports D1 D2

[    0.681426] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.681482] pci 0000:02:00.0: System wakeup disabled by ACPI

[    0.691158] pci 0000:00:1c.1: PCI bridge to [bus 02]

[    0.691163] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]

[    0.691167] pci 0000:00:1c.1:   bridge window [mem 0x90500000-0x905fffff]

[    0.691172] pci 0000:00:1c.1:   bridge window [mem 0x90400000-0x904fffff 64bit pref]

[    0.691252] pci 0000:00:1c.2: PCI bridge to [bus 03]

[    0.691333] pci 0000:00:1c.3: PCI bridge to [bus 04]

[    0.705333] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.705459] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.705583] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.705706] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.705830] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.705953] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.706079] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.706206] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.

[    0.709352] ACPI: Enabled 4 GPEs in block 00 to 3F

[    0.709469] ACPI : EC: event unblocked

[    0.709478] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62

[    0.709481] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events

[    0.709736] pci 0000:00:02.0: vgaarb: setting as boot VGA device

[    0.709740] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

[    0.709747] pci 0000:00:02.0: vgaarb: bridge control possible

[    0.709748] vgaarb: loaded

[    0.709866] Registered efivars operations

[    0.717277] PCI: Using ACPI for IRQ routing

[    0.718664] PCI: pci_cache_line_size set to 64 bytes

[    0.718716] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]

[    0.718718] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]

[    0.718720] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]

[    0.718721] e820: reserve RAM buffer [mem 0x78999000-0x7bffffff]

[    0.718723] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]

[    0.718907] NetLabel: Initializing

[    0.718908] NetLabel:  domain hash size = 128

[    0.718909] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO

[    0.718935] NetLabel:  unlabeled traffic allowed by default

[    0.719499] clocksource: Switched to clocksource refined-jiffies

[    0.731020] VFS: Disk quotas dquot_6.6.0

[    0.731054] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[    0.731228] pnp: PnP ACPI init

[    0.731341] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.732417] system 00:01: [io  0x0680-0x069f] has been reserved

[    0.732420] system 00:01: [io  0x0400-0x047f] has been reserved

[    0.732423] system 00:01: [io  0x0500-0x05fe] has been reserved

[    0.732425] system 00:01: [io  0x0600-0x061f] has been reserved

[    0.732430] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved

[    0.732435] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.732577] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)

[    0.732643] pnp 00:03: Plug and Play ACPI device, IDs ETD0424 PNP0f03 (active)

[    0.733164] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved

[    0.733167] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved

[    0.733170] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved

[    0.733173] system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved

[    0.733176] system 00:04: [mem 0xfed0c000-0xfed0ffff] has been reserved

[    0.733178] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved

[    0.733181] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved

[    0.733184] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved

[    0.733186] system 00:04: [mem 0xfef00000-0xfeffffff] has been reserved

[    0.733192] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.735390] pnp: PnP ACPI: found 5 devices

[    0.743623] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    0.743644] clocksource: Switched to clocksource acpi_pm

[    0.743667] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000

[    0.743681] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000

[    0.743684] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000

[    0.743687] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000

[    0.743695] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000

[    0.743698] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000

[    0.743701] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000

[    0.743710] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000

[    0.743713] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000

[    0.743716] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000

[    0.743719] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000

[    0.743722] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000

[    0.743725] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000

[    0.743728] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000

[    0.743730] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000

[    0.743733] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000

[    0.743736] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000

[    0.743739] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000

[    0.743742] pci 0000:00:1c.2: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000

[    0.743744] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000

[    0.743747] pci 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000

[    0.743759] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]

[    0.743762] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[    0.743767] pci 0000:00:1c.2: BAR 14: no space for [mem size 0x00200000]

[    0.743769] pci 0000:00:1c.2: BAR 14: failed to assign [mem size 0x00200000]

[    0.743777] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]

[    0.743779] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[    0.743784] pci 0000:00:1c.3: BAR 14: no space for [mem size 0x00200000]

[    0.743786] pci 0000:00:1c.3: BAR 14: failed to assign [mem size 0x00200000]

[    0.743793] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]

[    0.743795] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[    0.743801] pci 0000:00:1c.2: BAR 13: assigned [io  0x4000-0x4fff]

[    0.743805] pci 0000:00:1c.3: BAR 13: assigned [io  0x5000-0x5fff]

[    0.743811] pci 0000:00:1c.3: BAR 14: no space for [mem size 0x00200000]

[    0.743813] pci 0000:00:1c.3: BAR 14: failed to assign [mem size 0x00200000]

[    0.743821] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]

[    0.743823] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[    0.743827] pci 0000:00:1c.2: BAR 14: no space for [mem size 0x00200000]

[    0.743830] pci 0000:00:1c.2: BAR 14: failed to assign [mem size 0x00200000]

[    0.743837] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]

[    0.743839] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[    0.743846] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]

[    0.743849] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]

[    0.743853] pci 0000:00:1c.0: PCI bridge to [bus 01]

[    0.743856] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]

[    0.743861] pci 0000:00:1c.0:   bridge window [mem 0x90600000-0x906fffff]

[    0.743869] pci 0000:00:1c.1: PCI bridge to [bus 02]

[    0.743872] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]

[    0.743876] pci 0000:00:1c.1:   bridge window [mem 0x90500000-0x905fffff]

[    0.743880] pci 0000:00:1c.1:   bridge window [mem 0x90400000-0x904fffff 64bit pref]

[    0.743886] pci 0000:00:1c.2: PCI bridge to [bus 03]

[    0.743888] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]

[    0.743898] pci 0000:00:1c.3: PCI bridge to [bus 04]

[    0.743900] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]

[    0.743910] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]

[    0.743913] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]

[    0.743915] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]

[    0.743918] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]

[    0.743920] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]

[    0.743922] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]

[    0.743925] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]

[    0.743927] pci_bus 0000:00: resource 11 [mem 0x80000000-0x909ffffe window]

[    0.743930] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]

[    0.743932] pci_bus 0000:01: resource 1 [mem 0x90600000-0x906fffff]

[    0.743934] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]

[    0.743937] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff]

[    0.743939] pci_bus 0000:02: resource 2 [mem 0x90400000-0x904fffff 64bit pref]

[    0.743942] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]

[    0.743944] pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]

[    0.744093] NET: Registered protocol family 2

[    0.744347] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

[    0.744410] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)

[    0.744482] TCP: Hash tables configured (established 16384 bind 16384)

[    0.744565] UDP hash table entries: 1024 (order: 3, 32768 bytes)

[    0.744583] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)

[    0.744661] NET: Registered protocol family 1

[    0.744686] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[    0.745044] PCI: CLS 64 bytes, default 64

[    0.745154] Unpacking initramfs...

[    0.885570] Freeing initrd memory: 6736K

[    0.885638] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f37ff50e1e, max_idle_ns: 440795224014 ns

[    0.885678] clocksource: Switched to clocksource tsc

[    0.885805] Scanning for low memory corruption every 60 seconds

[    0.886839] Initialise system trusted keyrings

[    0.890331] workingset: timestamp_bits=40 max_order=19 bucket_order=0

[    0.893318] zbud: loaded

[    0.894419] Key type asymmetric registered

[    0.894494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)

[    0.894547] io scheduler noop registered

[    0.894548] io scheduler deadline registered

[    0.894562] io scheduler cfq registered (default)

[    0.895444] efifb: probing for efifb

[    0.895464] efifb: framebuffer at 0x80000000, using 4160k, total 4160k

[    0.895466] efifb: mode is 1366x768x32, linelength=5504, pages=1

[    0.895467] efifb: scrolling: redraw

[    0.895469] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0

[    0.901602] Console: switching to colour frame buffer device 170x48

[    0.907479] fb0: EFI VGA frame buffer device

[    0.907494] intel_idle: MWAIT substates: 0x33000020

[    0.907496] intel_idle: v0.4.1 model 0x37

[    0.907670] intel_idle: lapic_timer_reliable_states 0xffffffff

[    0.909862] GHES: HEST is not enabled!

[    0.910012] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    0.930338] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[    0.931545] hpet: number irqs doesn't agree with number of timers

[    0.931584] Linux agpgart interface v0.103

[    0.931993] rtc_cmos 00:00: RTC can wake from S4

[    0.932248] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0

[    0.932278] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram

[    0.932295] intel_pstate: Intel P-state driver initializing

[    0.932556] ledtrig-cpu: registered to indicate activity on CPUs

[    0.934188] NET: Registered protocol family 10

[    0.950261] Segment Routing with IPv6

[    0.950301] NET: Registered protocol family 17

[    0.951234] microcode: sig=0x30678, pf=0x8, revision=0x829

[    0.951549] microcode: Microcode Update Driver: v2.2.

[    0.952416] registered taskstats version 1

[    0.952434] Loading compiled-in X.509 certificates

[    0.952475] zswap: loaded using pool lzo/zbud

[    0.952971]   Magic number: 13:851:194

[    0.953106] rtc_cmos 00:00: setting system clock to 2017-04-15 20:10:58 UTC (1492287058)

[    0.953214] PM: Hibernation image not present or could not be loaded.

[    0.955998] Freeing unused kernel memory: 1292K

[    0.956002] Write protecting the kernel read-only data: 10240k

[    0.957389] Freeing unused kernel memory: 1812K

[    0.957878] Freeing unused kernel memory: 64K

[    0.992825] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)

[    0.996052] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    0.996151] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    0.997657] random: udevadm: uninitialized urandom read (16 bytes read)

[    0.997698] random: udevadm: uninitialized urandom read (16 bytes read)

[    1.004536] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    1.004569] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    1.004583] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    1.004981] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    1.005020] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    1.068025] sdhci: Secure Digital Host Controller Interface driver

[    1.068027] sdhci: Copyright(c) Pierre Ossman

[    1.076247] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12

[    1.087235] mmc0: SDHCI controller on ACPI [80860F14:01] using ADMA

[    1.090041] serio: i8042 KBD port at 0x60,0x64 irq 1

[    1.090049] serio: i8042 AUX port at 0x60,0x64 irq 12

[    1.090107] SCSI subsystem initialized

[    1.092428] libata version 3.00 loaded.

[    1.093383] ahci 0000:00:13.0: version 3.0

[    1.093547] ahci 0000:00:13.0: controller can't do DEVSLP, turning off

[    1.101259] ACPI: bus type USB registered

[    1.102077] usbcore: registered new interface driver usbfs

[    1.102103] usbcore: registered new interface driver hub

[    1.102143] usbcore: registered new device driver usb

[    1.103782] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode

[    1.103786] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso

[    1.106339] scsi host0: ahci

[    1.106536] scsi host1: ahci

[    1.106623] ata1: SATA max UDMA/133 abar m2048@0x90917000 port 0x90917100 irq 87

[    1.106625] ata2: DUMMY

[    1.107403] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    1.107412] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1

[    1.108503] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810

[    1.108508] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported

[    1.111485] hub 1-0:1.0: USB hub found

[    1.111503] hub 1-0:1.0: 6 ports detected

[    1.112830] xhci_hcd 0000:00:14.0: xHCI Host Controller

[    1.112836] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2

[    1.113676] hub 2-0:1.0: USB hub found

[    1.113690] hub 2-0:1.0: 1 port detected

[    1.299720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[    1.419241] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    1.437490] usb 1-3: new high-speed USB device number 2 using xhci_hcd

[    1.468286] ata1.00: ATA-8: TOSHIBA MQ01ABF050, AM0P1A, max UDMA/100

[    1.468296] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[    1.471833] ata1.00: configured for UDMA/100

[    1.472866] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABF0 1A   PQ: 0 ANSI: 5

[    1.517481] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)

[    1.517485] sd 0:0:0:0: [sda] 4096-byte physical blocks

[    1.517513] sd 0:0:0:0: [sda] Write Protect is off

[    1.517516] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    1.517562] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    1.654870]  sda: sda1 sda2 sda3 sda4

[    1.656951] sd 0:0:0:0: [sda] Attached SCSI disk

[    1.687075] usb 1-4: new high-speed USB device number 3 using xhci_hcd

[    1.820984] hub 1-4:1.0: USB hub found

[    1.821237] hub 1-4:1.0: 4 ports detected

[    2.047713] random: fast init done

[    2.103723] usb 1-4.1: new high-speed USB device number 4 using xhci_hcd

[    2.290385] usb 1-4.2: new full-speed USB device number 5 using xhci_hcd

[    2.584963] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)

[    3.718392] random: crng init done

[    3.852906] ip_tables: (C) 2000-2006 Netfilter Core Team

[    3.908653] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)

[    3.908876] systemd[1]: Detected architecture x86-64.

[    3.911056] systemd[1]: Set hostname to <computer>.

[    5.251303] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.

[    5.251467] systemd[1]: Listening on Journal Socket.

[    5.251501] systemd[1]: Reached target Login Prompts.

[    5.251557] systemd[1]: Listening on LVM2 metadata daemon socket.

[    5.252258] systemd[1]: Created slice System Slice.

[    5.253214] systemd[1]: Mounting Debug File System...

[    5.253567] systemd[1]: Created slice system-systemd\x2dfsck.slice.

[    5.423577] EXT4-fs (sda4): re-mounted. Opts: data="">

[    5.537245] usbip_core: USB/IP Core v1.0.0

[    5.548533] usbcore: registered new device driver usbip-host

[    5.548538] usbip_host: USB/IP Host Driver v1.0.0

[    7.733239] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[    7.749593] systemd-journald[155]: Received request to flush runtime journal from PID 1

[    7.791135] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2

[    7.792331] ACPI: Lid Switch [LID0]

[    7.792426] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3

[    7.792430] ACPI: Power Button [PWRB]

[    7.792504] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4

[    7.792508] ACPI: Sleep Button [SLPB]

[    7.792599] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5

[    7.792602] ACPI: Power Button [PWRF]

[    7.937323] [drm] Initialized

[    8.182894] hidraw: raw HID events driver (C) Jiri Kosina

[    8.210020] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED

[    8.212880] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params

[    8.212926] [drm:i915_driver_load [i915]] No PCH found.

[    8.212968] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00

[    8.213159] [drm:intel_device_info_dump [i915]] i915 device info: gen=7, pciid=0x0f31 rev=0x0e

[    8.213198] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no

[    8.213237] [drm:intel_device_info_dump [i915]] i915 device info: is_i85x: no

[    8.213275] [drm:intel_device_info_dump [i915]] i915 device info: is_i915g: no

[    8.213313] [drm:intel_device_info_dump [i915]] i915 device info: is_i945gm: no

[    8.213352] [drm:intel_device_info_dump [i915]] i915 device info: is_g33: no

[    8.213390] [drm:intel_device_info_dump [i915]] i915 device info: is_g4x: no

[    8.214995] [drm:intel_device_info_dump [i915]] i915 device info: is_pineview: no

[    8.217650] [drm:intel_device_info_dump [i915]] i915 device info: is_broadwater: no

[    8.217690] [drm:intel_device_info_dump [i915]] i915 device info: is_crestline: no

[    8.217729] [drm:intel_device_info_dump [i915]] i915 device info: is_ivybridge: no

[    8.217768] [drm:intel_device_info_dump [i915]] i915 device info: is_valleyview: yes

[    8.217807] [drm:intel_device_info_dump [i915]] i915 device info: is_cherryview: no

[    8.217845] [drm:intel_device_info_dump [i915]] i915 device info: is_haswell: no

[    8.217884] [drm:intel_device_info_dump [i915]] i915 device info: is_broadwell: no

[    8.217923] [drm:intel_device_info_dump [i915]] i915 device info: is_skylake: no

[    8.217961] [drm:intel_device_info_dump [i915]] i915 device info: is_broxton: no

[    8.218000] [drm:intel_device_info_dump [i915]] i915 device info: is_kabylake: no

[    8.218038] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no

[    8.218077] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: no

[    8.218115] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: no

[    8.218154] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: no

[    8.218192] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: no

[    8.218231] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: no

[    8.218269] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: no

[    8.218308] [drm:intel_device_info_dump [i915]] i915 device info: has_gmbus_irq: yes

[    8.218347] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: yes

[    8.218385] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: no

[    8.218424] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes

[    8.218462] [drm:intel_device_info_dump [i915]] i915 device info: has_hw_contexts: yes

[    8.218501] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no

[    8.218539] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: no

[    8.218577] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: no

[    8.218616] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no

[    8.218654] [drm:intel_device_info_dump [i915]] i915 device info: has_pipe_cxsr: no

[    8.218693] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no

[    8.218731] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: yes

[    8.218770] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes

[    8.218808] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no

[    8.218847] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: no

[    8.218885] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes

[    8.218923] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: no

[    8.218962] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no

[    8.219000] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no

[    8.219039] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no

[    8.219077] [drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no

[    8.219115] [drm:intel_device_info_dump [i915]] i915 device info: has_decoupled_mmio: no

[    8.219195] [drm:intel_device_info_runtime_init [i915]] slice mask: 0000

[    8.219235] [drm:intel_device_info_runtime_init [i915]] slice total: 0

[    8.219273] [drm:intel_device_info_runtime_init [i915]] subslice total: 0

[    8.219312] [drm:intel_device_info_runtime_init [i915]] subslice mask 0000

[    8.219350] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 0

[    8.219388] [drm:intel_device_info_runtime_init [i915]] EU total: 0

[    8.219427] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 0

[    8.219465] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n

[    8.219503] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n

[    8.219542] [drm:intel_device_info_runtime_init [i915]] has EU power gating: n

[    8.219580] [drm:i915_driver_load [i915]] ppgtt mode: 1

[    8.219618] [drm:i915_driver_load [i915]] use GPU sempahores? yes

[    8.219630] [drm] Memory usable by graphics device = 2048M

[    8.219672] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

[    8.219712] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 64M

[    8.219715] checking generic (80000000 410000) vs hw (80000000 10000000)

[    8.219716] fb: switching to inteldrmfb from EFI VGA

[    8.219750] Console: switching to colour dummy device 80x25

[    8.219899] [drm] Replacing VGA console driver

[    8.219978] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 65536K

[    8.220211] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7936f018

[    8.220266] [drm:intel_opregion_setup [i915]] Public ACPI methods supported

[    8.220308] [drm:intel_opregion_setup [i915]] ASLE supported

[    8.220351] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

[    8.220461] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[    8.220463] [drm] Driver supports precise vblank timestamp query.

[    8.220516] [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz

[    8.220559] [drm:intel_bios_init [i915]] VBT signature "$VBT VALLEYVIEW    ", BDB version 178

[    8.220602] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

[    8.220645] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

[    8.220688] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-19)

[    8.220730] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)

[    8.220773] [drm:intel_bios_init [i915]] DRRS supported mode is seamless

[    8.220816] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:

[    8.220829] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 0 71400 1366 1414 1446 1488 768 771 777 800 0x8 0xa

[    8.220872] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255

[    8.220915] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT

[    8.220958] [drm:intel_bios_init [i915]] DRRS State Enabled:1

[    8.221019] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

[    8.221073] [drm:intel_update_rawclk [i915]] rawclk rate: 200000 kHz

[    8.221122] [drm:intel_power_well_enable [i915]] enabling always-on

[    8.221161] [drm:intel_power_well_enable [i915]] enabling display

[    8.221205] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-01

[    8.221246] [drm:intel_power_well_enable [i915]] enabling dpio-tx-b-23

[    8.221287] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-01

[    8.221328] [drm:intel_power_well_enable [i915]] enabling dpio-tx-c-23

[    8.221369] [drm:intel_power_well_enable [i915]] enabling dpio-common

[    8.221844] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0

[    8.221889] [drm:intel_modeset_init [i915]] 2 display pipes available.

[    8.221973] [drm:intel_modeset_init [i915]] CZ clock rate: 333333 kHz

[    8.222018] [drm:intel_update_cdclk [i915]] Current CD clock rate: 333333 kHz

[    8.222061] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 400000 kHz

[    8.222103] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 360000 kHz

[    8.222110] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem

[    8.222483] [drm:intel_crt_reset [i915]] crt adpa set to 0xf40000

[    8.222531] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B

[    8.222580] [drm:intel_dp_init_connector [i915]] using AUX B for port B (platform default)

[    8.222634] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B

[    8.222687] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (platform default)

[    8.222737] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port C

[    8.222786] [drm:intel_dp_init_connector [i915]] using AUX C for port C (platform default)

[    8.222834] [drm:intel_dp_pps_init [i915]] initial power sequencer for port C: pipe A

[    8.222880] [drm:intel_pps_dump_state [i915]] cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

[    8.222922] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000

[    8.222965] [drm:intel_dp_init_panel_power_sequencer.part.15 [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

[    8.223007] [drm:intel_dp_init_panel_power_sequencer.part.15 [i915]] backlight on delay 1, off delay 200

[    8.223051] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06

[    8.223098] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on

[    8.223142] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000d

[    8.223614] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 81 41 00 00 01 80 02 00 00 00 0f 03 00

[    8.224044] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID D2SLV5 HW-rev 0.0 SW-rev 1.5

[    8.227562] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer

[    8.228653] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer

[    8.229962] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer

[    8.231010] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer

[    8.233086] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer

[    8.235313] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer

[    8.236364] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer

[    8.237677] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer

[    8.238726] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer

[    8.240032] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer

[    8.241224] ACPI: AC Adapter [ADP1] (on-line)

[    8.242796] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer

[    8.243849] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer

[    8.245158] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer

[    8.246208] [drm:drm_dp_i2c_do_msg [drm_kms_helper]] native defer

[    8.247259] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found

[    8.247315] [drm:intel_dp_init_connector [i915]] Downclock mode is not found. DRRS not supported

[    8.247360] [drm:intel_dp_init_connector [i915]] using pipe A for initial backlight setup

[    8.247406] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 2450/7812

[    8.247453] [drm:intel_dsi_init [i915]]

[    8.247517] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:33:pipe A] hw state readout: enabled

[    8.247562] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:42:pipe B] hw state readout: disabled

[    8.247607] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:44:CRT] hw state readout: disabled, pipe A

[    8.247652] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:45:DP B] hw state readout: disabled, pipe A

[    8.247839] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:49:HDMI B] hw state readout: disabled, pipe A

[    8.247887] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:52:DP C] hw state readout: enabled, pipe A

[    8.247931] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:53:eDP-1] hw state readout: enabled

[    8.247976] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:43:VGA-1] hw state readout: disabled

[    8.248020] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:46:DP-1] hw state readout: disabled

[    8.248064] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:50:HDMI-A-1] hw state readout: disabled

[    8.248123] [drm:intel_dump_pipe_config [i915]] [CRTC:33:pipe A][setup_hw_state]

[    8.248166] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 0

[    8.248210] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 5054136, gmch_n: 8388608, link_m: 140392, link_n: 524288, tu: 64

[    8.248252] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0

[    8.248294] [drm:intel_dump_pipe_config [i915]] requested mode:

[    8.248306] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 72299 1366 1414 1446 1526 768 771 777 790 0x40 0x9

[    8.248349] [drm:intel_dump_pipe_config [i915]] adjusted mode:

[    8.248359] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 72299 1366 1414 1446 1526 768 771 777 790 0x40 0x9

[    8.248403] [drm:intel_dump_pipe_config [i915]] crtc timings: 72299 1366 1414 1446 1526 768 771 777 790, type: 0x40 flags: 0x9

[    8.248446] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1366x768

[    8.248489] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000

[    8.248531] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0

[    8.248574] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0

[    8.248616] [drm:intel_dump_pipe_config [i915]] planes on this crtc

[    8.248659] [drm:intel_dump_pipe_config [i915]] [PLANE:25:primary A] disabled, scaler_id = 0

[    8.248702] [drm:intel_dump_pipe_config [i915]] [PLANE:27:sprite A] disabled, scaler_id = 0

[    8.248745] [drm:intel_dump_pipe_config [i915]] [PLANE:29:sprite B] disabled, scaler_id = 0

[    8.248787] [drm:intel_dump_pipe_config [i915]] [PLANE:31:cursor A] disabled, scaler_id = 0

[    8.248831] [drm:intel_dump_pipe_config [i915]] [CRTC:42:pipe B][setup_hw_state]

[    8.248874] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0

[    8.248916] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0

[    8.248958] [drm:intel_dump_pipe_config [i915]] requested mode:

[    8.248969] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0

[    8.249012] [drm:intel_dump_pipe_config [i915]] adjusted mode:

[    8.249021] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0

[    8.249065] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0

[    8.249107] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0

[    8.249150] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000

[    8.249192] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0

[    8.249570] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0

[    8.250051] [drm:intel_dump_pipe_config [i915]] planes on this crtc

[    8.250096] [drm:intel_dump_pipe_config [i915]] [PLANE:34:primary B] disabled, scaler_id = 0

[    8.250139] [drm:intel_dump_pipe_config [i915]] [PLANE:36:sprite C] disabled, scaler_id = 0

[    8.250181] [drm:intel_dump_pipe_config [i915]] [PLANE:38:sprite D] disabled, scaler_id = 0

[    8.250224] [drm:intel_dump_pipe_config [i915]] [PLANE:40:cursor B] disabled, scaler_id = 0

[    8.250269] [drm:vlv_get_fifo_size [i915]] Pipe A primary A FIFO size: 256

[    8.250309] [drm:vlv_get_fifo_size [i915]] Pipe A sprite A FIFO size: 128

[    8.250349] [drm:vlv_get_fifo_size [i915]] Pipe A sprite B FIFO size: 127

[    8.250389] [drm:vlv_get_fifo_size [i915]] Pipe B primary B FIFO size: 256

[    8.250484] [drm:vlv_get_fifo_size [i915]] Pipe B sprite C FIFO size: 128

[    8.250524] [drm:vlv_get_fifo_size [i915]] Pipe B sprite D FIFO size: 127

[    8.250564] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15

[    8.250603] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15

[    8.250643] [drm:vlv_wm_get_hw_state [i915]] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0

[    8.250697] [drm:i9xx_get_initial_plane_config [i915]] pipe/plane A/0 with fb: size=1366x768@32, offset=0, pitch 5504, size 0x408000

[    8.250739] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=408000

[    8.250801] [drm:intel_alloc_initial_plane_obj.isra.92 [i915]] initial plane fb obj ffff880077395080

[    8.250849] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [40a000, 7ffff000]

[    8.252517] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [408000, 409000]

[    8.252573] [drm:gen6_ppgtt_init [i915]] Allocated pde space (2M) at GTT entry: 7fdf0

[    8.254426] [drm:i915_gem_context_init [i915]] HW context support initialized

[    8.254651] [drm:intel_init_ring_buffer [i915]] render ring hws offset: 0x0040b000

[    8.254702] [drm:intel_engine_create_scratch [i915]] render ring pipe control offset: 0x7fffe000

[    8.257157] [drm:intel_init_ring_buffer [i915]] blitter ring hws offset: 0x0042e000

[    8.257277] [drm:intel_init_ring_buffer [i915]] bsd ring hws offset: 0x00451000

[    8.257366] [drm:intel_guc_setup [i915]] GuC fw status: path (null), fetch NONE, load NONE

[    8.257415] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000

[    8.257457] [drm:intel_init_gt_powersave [i915]] PCBR: 0x7eefa001

[    8.257499] [drm:vlv_init_gpll_ref_freq [i915]] GPLL reference freq: 20833 kHz

[    8.257540] [drm:intel_init_gt_powersave [i915]] DDR speed: 1333 MHz

[    8.257582] [drm:intel_init_gt_powersave [i915]] max GPU freq: 792 MHz (221)

[    8.257625] [drm:intel_init_gt_powersave [i915]] RPe GPU freq: 646 MHz (214)

[    8.257666] [drm:intel_init_gt_powersave [i915]] RP1(Guar Freq) GPU freq: 312 MHz (198)

[    8.257707] [drm:intel_init_gt_powersave [i915]] min GPU freq: 187 MHz (192)

[    8.258544] [drm:intel_update_cdclk [i915]] Current CD clock rate: 333333 kHz

[    8.258596] [drm:intel_fbdev_init [i915]] found possible fb from plane A

[    8.258638] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping

[    8.258680] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb

[    8.258724] [drm:intel_fbdev_init [i915]] pipe A area: 1366x768, bpp: 32, size: 4227072

[    8.258766] [drm:intel_fbdev_init [i915]] fb big enough for plane A (4227072 >= 4227072)

[    8.258809] [drm:intel_fbdev_init [i915]] pipe B not active, skipping

[    8.258851] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console

[    8.259185] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered

[    8.259233] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-eDP-1

[    8.259677] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1

[    8.259976] [drm:intel_opregion_register [i915]] 4 outputs detected

[    8.261102] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)

[    8.261512] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6

[    8.261600] [drm:drm_setup_crtcs [drm_kms_helper]]

[    8.261605] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:eDP-1]

[    8.261662] [drm:intel_dp_detect [i915]] [CONNECTOR:53:eDP-1]

[    8.261708] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source no, sink no

[    8.261751] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000

[    8.261793] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

[    8.261836] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

[    8.261856] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0

[    8.262279] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID D2SLV5 HW-rev 0.0 SW-rev 1.5

[    8.262573] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:eDP-1] status updated from unknown to connected

[    8.262608] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found

[    8.262617] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:eDP-1] probed modes :

[    8.262627] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"1366x768" 60 72300 1366 1414 1446 1526 768 771 777 790 0x48 0x9

[    8.262632] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:VGA-1]

[    8.262681] [drm:intel_crt_detect [i915]] [CONNECTOR:43:VGA-1] force=1

[    8.262725] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0xf40000

[    8.268819] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0xf40000, result 0

[    8.268865] [drm:intel_crt_detect [i915]] CRT not detected via hotplug

[    8.323775] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2

[    8.350409] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga

[    8.350501] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

[    8.350544] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

[    8.360224] Bluetooth: Core ver 2.22

[    8.360251] NET: Registered protocol family 31

[    8.360253] Bluetooth: HCI device and connection manager initialized

[    8.360258] Bluetooth: HCI socket layer initialized

[    8.360262] Bluetooth: L2CAP socket layer initialized

[    8.360277] Bluetooth: SCO socket layer initialized

[    8.378711] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga

[    8.378770] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

[    8.378813] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]

[    8.378821] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:VGA-1] status updated from unknown to disconnected

[    8.378833] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:VGA-1] disconnected

[    8.378846] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:46:DP-1]

[    8.378893] [drm:intel_dp_detect [i915]] [CONNECTOR:46:DP-1]

[    8.378901] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:46:DP-1] status updated from unknown to disconnected

[    8.378905] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:46:DP-1] disconnected

[    8.378910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:50:HDMI-A-1]

[    8.378953] [drm:intel_hdmi_detect [i915]] [CONNECTOR:50:HDMI-A-1]

[    8.380484] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

[    8.380527] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

[    8.382602] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

[    8.382617] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb

[    8.384772] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

[    8.384816] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

[    8.387074] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

[    8.387177] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)

[    8.387183] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:50:HDMI-A-1] status updated from unknown to disconnected

[    8.387188] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:50:HDMI-A-1] disconnected

[    8.387195] [drm:drm_setup_crtcs [drm_kms_helper]] connector 53 enabled? yes

[    8.387199] [drm:drm_setup_crtcs [drm_kms_helper]] connector 43 enabled? no

[    8.387203] [drm:drm_setup_crtcs [drm_kms_helper]] connector 46 enabled? no

[    8.387206] [drm:drm_setup_crtcs [drm_kms_helper]] connector 50 enabled? no

[    8.387259] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1

[    8.387301] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0

[    8.387345] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:33:pipe A]: 1366x768

[    8.387387] [drm:intel_fb_initial_config [i915]] connector VGA-1 not enabled, skipping

[    8.387429] [drm:intel_fb_initial_config [i915]] connector DP-1 not enabled, skipping

[    8.387471] [drm:intel_fb_initial_config [i915]] connector HDMI-A-1 not enabled, skipping

[    8.387477] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 33 (0,0)

[    8.387522] [drm:intelfb_create [i915]] re-using BIOS fb

[    8.387574] [drm:intelfb_create [i915]] allocated 1366x768 fb: 0x00000000

[    8.387588] [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]

[    8.387592] [drm:drm_setup_crtcs [drm_kms_helper]]

[    8.387596] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:eDP-1]

[    8.387639] [drm:intel_dp_detect [i915]] [CONNECTOR:53:eDP-1]

[    8.387683] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source no, sink no

[    8.387726] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000

[    8.387768] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

[    8.387811] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

[    8.388009] fbcon: inteldrmfb (fb0) is primary device

[    8.388256] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID D2SLV5 HW-rev 0.0 SW-rev 1.5

[    8.388630] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found

[    8.388639] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:eDP-1] probed modes :

[    8.388650] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"1366x768" 60 72300 1366 1414 1446 1526 768 771 777 790 0x48 0x9

[    8.388655] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:VGA-1]

[    8.388710] [drm:intel_crt_detect [i915]] [CONNECTOR:43:VGA-1] force=1

[    8.388757] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0xf40000

[    8.395861] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0xf40000, result 0

[    8.395904] [drm:intel_crt_detect [i915]] CRT not detected via hotplug

[    8.409443] Bluetooth: HCI UART driver ver 2.3

[    8.409445] Bluetooth: HCI UART protocol H4 registered

[    8.409446] Bluetooth: HCI UART protocol BCSP registered

[    8.409446] Bluetooth: HCI UART protocol LL registered

[    8.409447] Bluetooth: HCI UART protocol ATH3K registered

[    8.409448] Bluetooth: HCI UART protocol Three-wire (H5) registered

[    8.409499] Bluetooth: HCI UART protocol Intel registered

[    8.409519] Bluetooth: HCI UART protocol Broadcom registered

[    8.409520] Bluetooth: HCI UART protocol QCA registered

[    8.409521] Bluetooth: HCI UART protocol AG6XX registered

[    8.409522] Bluetooth: HCI UART protocol Marvell registered

[    8.450475] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2

[    8.483742] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga

[    8.483799] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

[    8.483843] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

[    8.501491] ACPI: Battery Slot [BAT1] (battery present)

[    8.517991] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga

[    8.518054] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

[    8.518097] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]

[    8.518104] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:VGA-1] disconnected

[    8.518110] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:46:DP-1]

[    8.518152] [drm:intel_dp_detect [i915]] [CONNECTOR:46:DP-1]

[    8.518160] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:46:DP-1] disconnected

[    8.518164] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:50:HDMI-A-1]

[    8.518206] [drm:intel_hdmi_detect [i915]] [CONNECTOR:50:HDMI-A-1]

[    8.520285] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

[    8.520328] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

[    8.521668] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().

[    8.522399] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

[    8.522412] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb

[    8.522697] thermal LNXTHERM:00: registered as thermal_zone1

[    8.522699] ACPI: Thermal Zone [TZ01] (60 C)

[    8.523789] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

[    8.523831] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

[    8.525911] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

[    8.525921] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)

[    8.525927] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:50:HDMI-A-1] disconnected

[    8.525934] [drm:drm_setup_crtcs [drm_kms_helper]] connector 53 enabled? yes

[    8.525937] [drm:drm_setup_crtcs [drm_kms_helper]] connector 43 enabled? no

[    8.525941] [drm:drm_setup_crtcs [drm_kms_helper]] connector 46 enabled? no

[    8.525944] [drm:drm_setup_crtcs [drm_kms_helper]] connector 50 enabled? no

[    8.525990] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1

[    8.526032] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0

[    8.526075] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:33:pipe A]: 1366x768

[    8.526117] [drm:intel_fb_initial_config [i915]] connector VGA-1 not enabled, skipping

[    8.526159] [drm:intel_fb_initial_config [i915]] connector DP-1 not enabled, skipping

[    8.526201] [drm:intel_fb_initial_config [i915]] connector HDMI-A-1 not enabled, skipping

[    8.526207] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 33 (0,0)

[    8.526293] [drm:intel_atomic_check [i915]] [CONNECTOR:53:eDP-1] checking for sink bpp constrains

[    8.526336] [drm:intel_atomic_check [i915]] clamping display bpp (was 30) to default limit of 24

[    8.526380] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 1 max bw 270000 pixel clock 72300KHz

[    8.526423] [drm:intel_dp_compute_config [i915]] clamping bpp for eDP panel to BIOS-provided 18

[    8.526466] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18

[    8.526507] [drm:intel_dp_compute_config [i915]] DP link bw required 130140 available 216000

[    8.526552] [drm:intel_atomic_check [i915]] hw max bpp: 30, pipe bpp: 18, dithering: 1

[    8.526595] [drm:intel_dump_pipe_config [i915]] [CRTC:33:pipe A][modeset]

[    8.526638] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 18, dithering: 1

[    8.526681] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 1; gmch_m: 2527068, gmch_n: 4194304, link_m: 140392, link_n: 524288, tu: 64

[    8.526723] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0

[    8.526765] [drm:intel_dump_pipe_config [i915]] requested mode:

[    8.526776] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 72300 1366 1414 1446 1526 768 771 777 790 0x48 0x9

[    8.526818] [drm:intel_dump_pipe_config [i915]] adjusted mode:

[    8.526828] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 72300 1366 1414 1446 1526 768 771 777 790 0x48 0x9

[    8.526871] [drm:intel_dump_pipe_config [i915]] crtc timings: 72300 1366 1414 1446 1526 768 771 777 790, type: 0x48 flags: 0x9

[    8.526914] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1366x768

[    8.526956] [drm:intel_dump_pipe_config [i915]] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000

[    8.526998] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0

[    8.527041] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0

[    8.527102] [drm:intel_dump_pipe_config [i915]] planes on this crtc

[    8.527146] [drm:intel_dump_pipe_config [i915]] [PLANE:25:primary A] FB:60, fb = 1366x768 format = XR24 little-endian (0x34325258)

[    8.527188] [drm:intel_dump_pipe_config [i915]] [PLANE:27:sprite A] disabled, scaler_id = 0

[    8.527230] [drm:intel_dump_pipe_config [i915]] [PLANE:29:sprite B] disabled, scaler_id = 0

[    8.527272] [drm:intel_dump_pipe_config [i915]] [PLANE:31:cursor A] disabled, scaler_id = 0

[    8.527318] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 266667, actual 266667

[    8.527377] [drm:intel_set_memory_cxsr [i915]] memory self-refresh is disabled

[    8.542047] [drm:intel_edp_backlight_off.part.25 [i915]]

[    8.593514] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt

[    8.703553] input: PC Speaker as /devices/platform/pcspkr/input/input7

[    8.747106] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0

[    8.747321] [drm:edp_panel_off [i915]] Turn eDP port C panel power off

[    8.747364] [drm:edp_panel_off [i915]] Wait for panel power off time

[    8.747410] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status e0000003 control abcd0000

[    8.779178] [drm:wait_panel_status [i915]] Wait complete

[    8.779234] [drm:intel_disable_pipe [i915]] disabling pipe A

[    8.792464] [drm:intel_dp_link_down [i915]]

[    8.849143] [drm:intel_update_cdclk [i915]] Current CD clock rate: 266667 kHz

[    8.849188] [drm:intel_atomic_commit_tail [i915]] [ENCODER:44:CRT]

[    8.849233] [drm:intel_atomic_commit_tail [i915]] [ENCODER:45:DP B]

[    8.849277] [drm:intel_atomic_commit_tail [i915]] [ENCODER:49:HDMI B]

[    8.849321] [drm:intel_atomic_commit_tail [i915]] [ENCODER:52:DP C]

[    8.849563] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1

[    8.849607] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on

[    8.849649] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle

[    8.945573] usbcore: registered new interface driver btusb

[    8.954096] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723

[    8.954098] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin

[    9.077665] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[    9.077682] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control

[    9.078384] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc900003cd000, 00:e0:4c:68:01:d9, XID 0c900800 IRQ 91

[    9.078386] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]

[    9.257400] iTCO_vendor_support: vendor-support=0

[    9.363853] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd0000

[    9.363942] [drm:intel_print_rc6_info [i915]] Enabling RC6 states: RC6 on

[    9.364034] [drm:wait_panel_status [i915]] Wait complete

[    9.364120] [drm:intel_enable_gt_powersave [i915]] GPLL enabled? yes

[    9.364212] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008

[    9.364298] [drm:intel_enable_gt_powersave [i915]] GPU status: 0x0000c6d0

[    9.364390] [drm:edp_panel_vdd_on [i915]] eDP port C panel power wasn't enabled

[    9.368059] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x254f00)

[    9.382015] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.

[    9.396149] psmouse serio1: elantech: Elan sample query result 00, 6e, 64

[    9.461103] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

[    9.461204] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)

[    9.461526] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[    9.570446] [drm:edp_panel_on [i915]] Turn eDP port C panel power on

[    9.570489] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle

[    9.570536] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control abcd0008

[    9.570579] [drm:wait_panel_status [i915]] Wait complete

[    9.570620] [drm:edp_panel_on [i915]] Wait for panel power on

[    9.570665] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 0000000a control abcd000b

[    9.722466] [drm:wait_panel_status [i915]] Wait complete

[    9.722511] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port C VDD off

[    9.722555] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003

[    9.722607] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on

[    9.722651] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b

[    9.723186] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0

[    9.723227] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0

[    9.723269] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1

[    9.723902] [drm:intel_dp_start_link_train [i915]] clock recovery OK

[    9.723944] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2

[    9.724868] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful

[    9.725097] [drm:vlv_pipe_set_fifo_size.isra.11 [i915]] Pipe A FIFO split 511 / 511 / 511

[    9.725139] [drm:vlv_update_wm [i915]] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0

[    9.725182] [drm:intel_enable_pipe [i915]] enabling pipe A

[    9.725232] [drm:intel_edp_backlight_on.part.24 [i915]]

[    9.725273] [drm:intel_panel_enable_backlight [i915]] pipe A

[    9.725315] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 2450

[    9.730469] [drm:intel_psr_enable [i915]] PSR not supported by this panel

[    9.741984] [drm:verify_connector_state.isra.52 [i915]] [CONNECTOR:53:eDP-1]

[    9.742042] [drm:intel_atomic_commit_tail [i915]] [CRTC:33:pipe A]

[    9.758644] Console: switching to colour frame buffer device 170x48

[    9.758761] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

[    9.775301] [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]

[    9.775305] [drm:drm_setup_crtcs [drm_kms_helper]]

[    9.775310] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:eDP-1]

[    9.775365] [drm:intel_dp_detect [i915]] [CONNECTOR:53:eDP-1]

[    9.775415] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source no, sink no

[    9.775457] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000

[    9.775499] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

[    9.775541] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

[    9.775964] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID D2SLV5 HW-rev 0.0 SW-rev 1.5

[    9.776318] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found

[    9.776326] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:eDP-1] probed modes :

[    9.776337] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"1366x768" 60 72300 1366 1414 1446 1526 768 771 777 790 0x48 0x9

[    9.776342] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:VGA-1]

[    9.776384] [drm:intel_crt_detect [i915]] [CONNECTOR:43:VGA-1] force=1

[    9.776433] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0xf40000

[    9.782453] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0xf40000, result 0

[    9.782495] [drm:intel_crt_detect [i915]] CRT not detected via hotplug

[    9.791093] usb 1-4.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested

[    9.791119] usbcore: registered new interface driver ath9k_htc

[    9.832084] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin

[    9.838494] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2

[    9.863735] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga

[    9.863794] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

[    9.863836] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

[    9.888205] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2

[    9.888209] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_config.bin

[    9.888210] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin

[    9.890429] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga

[    9.890484] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

[    9.890525] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]

[    9.890533] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:VGA-1] disconnected

[    9.890540] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:46:DP-1]

[    9.890581] [drm:intel_dp_detect [i915]] [CONNECTOR:46:DP-1]

[    9.890588] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:46:DP-1] disconnected

[    9.890593] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:50:HDMI-A-1]

[    9.890634] [drm:intel_hdmi_detect [i915]] [CONNECTOR:50:HDMI-A-1]

[    9.892692] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

[    9.892733] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

[    9.894798] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

[    9.894809] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb

[    9.896865] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

[    9.896906] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

[    9.898975] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

[    9.899023] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)

[    9.899030] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:50:HDMI-A-1] disconnected

[    9.899066] [drm:drm_setup_crtcs [drm_kms_helper]] connector 53 enabled? yes

[    9.899071] [drm:drm_setup_crtcs [drm_kms_helper]] connector 43 enabled? no

[    9.899075] [drm:drm_setup_crtcs [drm_kms_helper]] connector 46 enabled? no

[    9.899080] [drm:drm_setup_crtcs [drm_kms_helper]] connector 50 enabled? no

[    9.899140] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1

[    9.899207] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0

[    9.899262] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:33:pipe A]: 1366x768

[    9.899315] [drm:intel_fb_initial_config [i915]] connector VGA-1 not enabled, skipping

[    9.899369] [drm:intel_fb_initial_config [i915]] connector DP-1 not enabled, skipping

[    9.899422] [drm:intel_fb_initial_config [i915]] connector HDMI-A-1 not enabled, skipping

[    9.899430] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1366x768 set on crtc 33 (0,0)

[    9.900482] Bluetooth: hci0: rom_version status=0 version=1

[    9.900495] Bluetooth: cfg_sz 0, total size 22496

[    9.918865] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

[    9.993102] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8

[   10.088996] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker

[   10.089001] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[   10.089005] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)

[   10.089008] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0

[   10.089011] snd_hda_codec_realtek hdaudioC0D0:    inputs:

[   10.089015] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19

[   10.089019] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18

[   10.099746] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'

[   10.100141] rtlwifi: rtlwifi: wireless switch is on

[   10.407989] usb 1-4.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008

[   10.487436] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=3123/7812

[   10.487491] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 3123

[   10.505453] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9

[   10.506185] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10

[   10.506288] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11

[   10.506390] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12

[   10.506488] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13

[   10.591812] media: Linux media interface: v0.10

[   10.659899] ath9k_htc 1-4.1:1.0: ath9k_htc: HTC initialized with 33 credits

[   10.660020] Linux video capture interface: v2.00

[   10.928755] ath9k_htc 1-4.1:1.0: ath9k_htc: FW Version: 1.4

[   10.928761] ath9k_htc 1-4.1:1.0: FW RMW support: On

[   10.928764] ath: EEPROM regdomain: 0x809c

[   10.928766] ath: EEPROM indicates we should expect a country code

[   10.928768] ath: doing EEPROM country->regdmn map search

[   10.928770] ath: country maps to regdmn code: 0x52

[   10.928772] ath: Country alpha2 being used: CN

[   10.928774] ath: Regpair used: 0x52

[   10.935659] ieee80211 phy1: Atheros AR9271 Rev:1

[   10.944734] Adding 4194300k swap on /dev/sda3.  Priority:-1 extents:1 across:4194300k FS

[   11.219916] uvcvideo: Found UVC 1.00 device USB Video Device (090c:37c0)

[   11.224532] uvcvideo 1-3:1.0: Entity type for entity Extension 2 was not initialized!

[   11.224539] uvcvideo 1-3:1.0: Entity type for entity Processing 3 was not initialized!

[   11.224543] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!

[   11.224748] input: USB Video Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input14

[   11.224929] usbcore: registered new interface driver uvcvideo

[   11.224931] USB Video Class driver (1.1.1)

[   11.289590] rtl8723be 0000:01:00.0 wlp1s0: renamed from wlan0

[   11.301313] r8169 0000:02:00.0 enp2s0: renamed from eth0

[   11.400539] mousedev: PS/2 mouse device common for all mice

[   11.701659] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().

[   11.701747] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().

[   11.889362] ath9k_htc 1-4.1:1.0 wlp0s20u4u1: renamed from wlan1

[   11.912376] intel_rapl: Found RAPL domain package

[   11.912379] intel_rapl: Found RAPL domain core

[   12.660842] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data="">

[   12.857277] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port C VDD off

[   12.857318] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007

[   14.460010] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   14.460014] Bluetooth: BNEP filters: protocol multicast

[   14.460022] Bluetooth: BNEP socket layer initialized

[   16.620953] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready

[   16.763227] r8169 0000:02:00.0 enp2s0: link down

[   16.763318] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready

[   16.790138] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[   17.499708] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[   18.086053] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[   18.091980] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u4u1: link is not ready

[   18.293060] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u4u1: link is not ready

[   18.554582] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u4u1: link is not ready

[   19.497501] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u4u1: link is not ready

[   19.596439] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

[   21.320919] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u4u1: link is not ready

[   22.703571] [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created

[   22.708933] [drm:i915_gem_context_destroy_ioctl [i915]] HW context 1 destroyed

[   22.709788] [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created

[   22.815420] wlp0s20u4u1: authenticate with dc:9f:db:a6:32:ef

[   23.106624] wlp0s20u4u1: send auth to dc:9f:db:a6:32:ef (try 1/3)

[   23.109773] wlp0s20u4u1: authenticated

[   23.113723] ath9k_htc 1-4.1:1.0 wlp0s20u4u1: disabling HT as WMM/QoS is not supported by the AP

[   23.113726] ath9k_htc 1-4.1:1.0 wlp0s20u4u1: disabling VHT as WMM/QoS is not supported by the AP

[   23.120476] wlp0s20u4u1: associate with dc:9f:db:a6:32:ef (try 1/3)

[   23.122824] wlp0s20u4u1: RX AssocResp from dc:9f:db:a6:32:ef (capab=0x21 status=0 aid=6)

[   23.127757] wlp0s20u4u1: associated

[   23.127804] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u4u1: link becomes ready

[   23.237134] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:eDP-1]

[   23.237163] [drm:intel_dp_detect [i915]] [CONNECTOR:53:eDP-1]

[   23.237187] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source no, sink no

[   23.237208] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000

[   23.237229] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

[   23.237250] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

[   23.237275] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on

[   23.237298] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f

[   23.237702] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID D2SLV5 HW-rev 0.0 SW-rev 1.5

[   23.238062] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found

[   23.238070] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:eDP-1] probed modes :

[   23.238081] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"1366x768" 60 72300 1366 1414 1446 1526 768 771 777 790 0x48 0x9

[   23.238095] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:VGA-1]

[   23.238116] [drm:intel_crt_detect [i915]] [CONNECTOR:43:VGA-1] force=1

[   23.238140] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0xf40000

[   23.243972] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0xf40000, result 0

[   23.244016] [drm:intel_crt_detect [i915]] CRT not detected via hotplug

[   23.302261] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2

[   23.327072] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga

[   23.327101] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

[   23.327122] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

[   23.353742] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga

[   23.353771] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

[   23.353792] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]

[   23.353800] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:VGA-1] disconnected

[   23.353823] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:46:DP-1]

[   23.353844] [drm:intel_dp_detect [i915]] [CONNECTOR:46:DP-1]

[   23.353852] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:46:DP-1] disconnected

[   23.353863] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:50:HDMI-A-1]

[   23.353883] [drm:intel_hdmi_detect [i915]] [CONNECTOR:50:HDMI-A-1]

[   23.356074] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

[   23.356101] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

[   23.357236] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

[   23.357250] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb

[   23.359452] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

[   23.359474] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

[   23.360595] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

[   23.360604] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)

[   23.360610] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:50:HDMI-A-1] disconnected

[   23.939751] [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created

[   26.297081] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port C VDD off

[   26.297106] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007

[   27.758410] Bluetooth: RFCOMM TTY layer initialized

[   27.758419] Bluetooth: RFCOMM socket layer initialized

[   27.758428] Bluetooth: RFCOMM ver 1.11

[   27.811556] [drm:vlv_pipe_set_fifo_size.isra.11 [i915]] Pipe A FIFO split 511 / 511 / 511

[   27.811600] [drm:vlv_update_wm [i915]] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=937, cursor=0 level=0 cxsr=1

[   27.811637] [drm:intel_set_memory_cxsr [i915]] memory self-refresh is enabled

[   34.349541] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   34.349580] [drm:drm_mode_setcrtc [drm]] [CRTC:33:pipe A]

[   34.349593] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:53:eDP-1]

[   34.362238] [drm:vlv_pipe_set_fifo_size.isra.11 [i915]] Pipe A FIFO split 511 / 511 / 511

[   34.363027] [drm:vlv_pipe_set_fifo_size.isra.11 [i915]] Pipe A FIFO split 511 / 511 / 511

[   34.725290] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   34.851307] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   34.867133] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   34.883598] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   34.899606] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   34.917265] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   34.932758] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   34.959196] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   34.983556] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.001354] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.035714] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.075273] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.105133] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.140887] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.170319] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.206898] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.271937] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.332336] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.353710] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.370964] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.384202] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.404742] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.416647] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.437909] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.449920] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.470042] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.485855] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.500236] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.517959] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.536971] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.550872] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.568271] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.584310] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.604532] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.617300] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.634675] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.651719] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.668568] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.683690] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.702917] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.717715] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   35.734176] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   35.753378] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   36.663299] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   36.774158] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   36.803470] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   36.818628] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   36.835426] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   36.857767] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   36.887575] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   36.903894] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   36.918381] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   36.936002] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   37.002454] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   37.026882] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   37.036237] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   37.053886] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   37.077152] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   37.085579] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   37.108005] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   37.119682] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   37.141201] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   37.152886] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   37.175393] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   37.186759] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   37.753304] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   38.012539] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   38.273591] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   38.526092] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   38.894212] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   39.146873] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   39.373412] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   39.574515] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   40.482630] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   40.509336] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   40.531348] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   40.552849] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   41.024680] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   41.040460] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   41.058819] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   41.073283] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   41.089987] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   41.106680] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   41.124405] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   41.142453] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   41.159636] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   41.174877] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   41.192390] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   41.206603] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   41.223317] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   41.237625] [drm:drm_mode_addfb2 [drm]] [FB:56]

[   42.065771] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   42.066246] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer

[   42.066260] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer

[   42.066290] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   42.066569] [drm:vlv_pipe_set_fifo_size.isra.11 [i915]] Pipe A FIFO split 511 / 511 / 511

[   42.066599] [drm:vlv_update_wm [i915]] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=937, cursor=0 level=0 cxsr=1

[   42.164975] [drm:drm_mode_addfb2 [drm]] [FB:59]

[   42.453401] [drm:drm_mode_setcrtc [drm]] [CRTC:33:pipe A]

[   42.453416] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:53:eDP-1]

[   43.201020] [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created

[   43.215470] [drm:i915_gem_context_destroy_ioctl [i915]] HW context 1 destroyed

[   43.703771] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:eDP-1]

[   43.703800] [drm:intel_dp_detect [i915]] [CONNECTOR:53:eDP-1]

[   43.703824] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source no, sink no

[   43.703846] [drm:intel_dp_print_rates [i915]] source rates: 162000, 270000

[   43.703867] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

[   43.703888] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

[   43.703912] [drm:edp_panel_vdd_on [i915]] Turning eDP port C VDD on

[   43.703936] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f

[   43.704337] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID D2SLV5 HW-rev 0.0 SW-rev 1.5

[   43.704693] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found

[   43.704701] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:53:eDP-1] probed modes :

[   43.704711] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"1366x768" 60 72300 1366 1414 1446 1526 768 771 777 790 0x48 0x9

[   43.706126] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:46:DP-1]

[   43.706155] [drm:intel_dp_detect [i915]] [CONNECTOR:46:DP-1]

[   43.706164] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:46:DP-1] disconnected

[   43.706180] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:50:HDMI-A-1]

[   43.706201] [drm:intel_hdmi_detect [i915]] [CONNECTOR:50:HDMI-A-1]

[   43.708247] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

[   43.708267] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

[   43.710299] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

[   43.710310] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb

[   43.712581] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

[   43.712601] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

[   43.713753] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

[   43.713762] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)

[   43.713769] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:50:HDMI-A-1] disconnected

[   43.713801] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:VGA-1]

[   43.713827] [drm:intel_crt_detect [i915]] [CONNECTOR:43:VGA-1] force=1

[   43.713855] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0xf40000

[   43.721106] [drm:intel_crt_detect [i915]] valleyview hotplug adpa=0xf40000, result 0

[   43.721154] [drm:intel_crt_detect [i915]] CRT not detected via hotplug

[   43.777745] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2

[   43.803723] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga

[   43.803752] [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

[   43.803773] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

[   43.830387] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus vga

[   43.830417] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

[   43.830438] [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]

[   43.830445] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:VGA-1] disconnected

[   43.853591] [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created

[   43.863857] [drm:i915_gem_context_destroy_ioctl [i915]] HW context 1 destroyed

[   43.865039] [drm:i915_gem_context_create_ioctl [i915]] HW context 1 created

[   44.513238] fuse init (API version 7.26)

[   45.678037] [drm:vlv_pipe_set_fifo_size.isra.11 [i915]] Pipe A FIFO split 511 / 511 / 511

[   45.678063] [drm:vlv_update_wm [i915]] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=937, cursor=0 level=0 cxsr=1

[   46.777099] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port C VDD off

[   46.777124] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007

[   52.620415] [drm:drm_mode_addfb2 [drm]] [FB:64]

[   52.696301] [drm:drm_mode_addfb2 [drm]] [FB:62]

[   52.894247] [drm:drm_mode_addfb2 [drm]] [FB:67]

[   67.738066] [drm:vlv_pipe_set_fifo_size.isra.11 [i915]] Pipe A FIFO split 511 / 511 / 511

[   67.738091] [drm:vlv_update_wm [i915]] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=937, cursor=0 level=0 cxsr=1

[   73.760160] [drm:vlv_pipe_set_fifo_size.isra.11 [i915]] Pipe A FIFO split 511 / 511 / 511

[   73.760216] [drm:vlv_update_wm [i915]] Setting FIFO watermarks - A: plane=425, cursor=0, sprite0=0, sprite1=0, SR: plane=937, cursor=0 level=0 cxsr=1

[  144.720805] [drm:vlv_pipe_set_fifo_size.isra.11 [i915]] Pipe A FIFO split 511 / 511 / 511

[  144.720922] [drm:vlv_update_wm [i915]] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=937, cursor=0 level=0 cxsr=1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel