Em Sun, 5 Mar 2017 18:00:32 +0800
Randy Li <ayaka@xxxxxxxxxxx> escreveu:
> The formats added by this patch are:
> V4L2_PIX_FMT_P010
> V4L2_PIX_FMT_P010M
> V4L2_PIX_FMT_P016
> V4L2_PIX_FMT_P016M
> Currently, none of driver uses those format.
>
> Also a variant of V4L2_PIX_FMT_P010M pixel format is added.
> The V4L2_PIX_FMT_P010CM is a compat variant of the V4L2_PIX_FMT_P010,
> which uses the unused 6 bits to store the next pixel. And with
> the alignment requirement of the hardware, it usually would be
> some extra space left at the end of a stride.
You should check your patches with checkpatch... I'm getting
this:
WARNING: 'simliar' may be misspelled - perhaps 'similar'?
#61: FILE: Documentation/media/uapi/v4l/pixfmt-p010.rst:13:
+chroma samples as simliar to ``V4L2_PIX_FMT_NV12``
WARNING: 'simliar' may be misspelled - perhaps 'similar'?
#334: FILE: Documentation/media/uapi/v4l/pixfmt-p016.rst:13:
+chroma samples as simliar to ``V4L2_PIX_FMT_NV12``
>
> Signed-off-by: Randy Li <ayaka@xxxxxxxxxxx>
> ---
> Documentation/media/uapi/v4l/pixfmt-p010.rst | 126 ++++++++++++++++++++++++
> Documentation/media/uapi/v4l/pixfmt-p010m.rst | 135 ++++++++++++++++++++++++++
> Documentation/media/uapi/v4l/pixfmt-p016.rst | 125 ++++++++++++++++++++++++
> Documentation/media/uapi/v4l/pixfmt-p016m.rst | 134 +++++++++++++++++++++++++
> Documentation/media/uapi/v4l/yuv-formats.rst | 4 +
> include/uapi/linux/videodev2.h | 5 +
> 6 files changed, 529 insertions(+)
> create mode 100644 Documentation/media/uapi/v4l/pixfmt-p010.rst
> create mode 100644 Documentation/media/uapi/v4l/pixfmt-p010m.rst
> create mode 100644 Documentation/media/uapi/v4l/pixfmt-p016.rst
> create mode 100644 Documentation/media/uapi/v4l/pixfmt-p016m.rst
>
> diff --git a/Documentation/media/uapi/v4l/pixfmt-p010.rst b/Documentation/media/uapi/v4l/pixfmt-p010.rst
> new file mode 100644
> index 0000000..59ed118
> --- /dev/null
> +++ b/Documentation/media/uapi/v4l/pixfmt-p010.rst
> @@ -0,0 +1,126 @@
> +.. -*- coding: utf-8; mode: rst -*-
> +
> +.. _V4L2-PIX-FMT-P010:
> +
> +******************************************************
> +V4L2_PIX_FMT_P010 ('P010')
> +******************************************************
> +
> +
> +V4L2_PIX_FMT_P010
> +Formats with ½ horizontal and vertical chroma resolution. One luminance and
> +one chrominance plane with alternating
> +chroma samples as simliar to ``V4L2_PIX_FMT_NV12``
It is probably ok to use the UTF symbol for 1/2, but you should check
if both PDF and HTML outputs will be ok.
> +
> +
> +Description
> +===========
> +
> +It is a two-plane versions of the YUV 4:2:0 format. The three
> +components are separated into two sub-images or planes. The Y plane is
> +first. The Y plane has 16 bits per pixel, but only 10 bits are used with the
> +rest 6 bits set to zero. For ``V4L2_PIX_FMT_P010``, a combined CbCr plane
> +immediately follows the Y plane in memory. The CbCr
> +plane is the same width, in bytes, as the Y plane (and of the image),
> +but is half as tall in pixels. Each CbCr pair belongs to four pixels.
> +For example, Cb\ :sub:`0`/Cr\ :sub:`0` belongs to Y'\ :sub:`00`,
> +Y'\ :sub:`01`, Y'\ :sub:`10`, Y'\ :sub:`11`.
> +If the Y plane has pad bytes after each row, then the CbCr plane has as
> +many pad bytes after its rows.
> +
> +**Byte Order.**
> +Each cell is two bytes.
> +
> +
> +.. flat-table::
> + :header-rows: 0
> + :stub-columns: 0
> +
> + * - start + 0:
> + - Y'\ :sub:`00`
> + - Y'\ :sub:`01`
> + - Y'\ :sub:`02`
> + - Y'\ :sub:`03`
> + * - start + 4:
> + - Y'\ :sub:`10`
> + - Y'\ :sub:`11`
> + - Y'\ :sub:`12`
> + - Y'\ :sub:`13`
> + * - start + 8:
> + - Y'\ :sub:`20`
> + - Y'\ :sub:`21`
> + - Y'\ :sub:`22`
> + - Y'\ :sub:`23`
> + * - start + 12:
> + - Y'\ :sub:`30`
> + - Y'\ :sub:`31`
> + - Y'\ :sub:`32`
> + - Y'\ :sub:`33`
> + * - start + 16:
> + - Cb\ :sub:`00`
> + - Cr\ :sub:`00`
> + - Cb\ :sub:`01`
> + - Cr\ :sub:`01`
> + * - start + 20:
> + - Cb\ :sub:`10`
> + - Cr\ :sub:`10`
> + - Cb\ :sub:`11`
> + - Cr\ :sub:`11`
> +
> +
> +**Color Sample Location..**
> +
> +.. flat-table::
> + :header-rows: 0
> + :stub-columns: 0
> +
> + * -
> + - 0
> + -
> + - 1
> + - 2
> + -
> + - 3
> + * - 0
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> + * -
> + -
> + - C
> + -
> + -
> + - C
> + -
> + * - 1
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> + * -
> + * - 2
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> + * -
> + -
> + - C
> + -
> + -
> + - C
> + -
> + * - 3
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> diff --git a/Documentation/media/uapi/v4l/pixfmt-p010m.rst b/Documentation/media/uapi/v4l/pixfmt-p010m.rst
> new file mode 100644
> index 0000000..6697d15
> --- /dev/null
> +++ b/Documentation/media/uapi/v4l/pixfmt-p010m.rst
> @@ -0,0 +1,135 @@
> +.. -*- coding: utf-8; mode: rst -*-
> +
> +.. _V4L2-PIX-FMT-P010M:
> +
> +***********************************************************************************
> +V4L2_PIX_FMT_P010M ('PM10')
> +***********************************************************************************
> +
> +
> +V4L2_PIX_FMT_P010M
> +Variation of ``V4L2_PIX_FMT_P010`` with planes non contiguous in memory.
> +
> +
> +Description
> +===========
> +
> +This is a multi-planar, two-plane version of the YUV 4:2:0 format. The
> +three components are separated into two sub-images or planes.
> +``V4L2_PIX_FMT_P010M`` differs from ``V4L2_PIX_FMT_P010`` in that the
> +two planes are non-contiguous in memory, i.e. the chroma plane do not
> +necessarily immediately follows the luma plane. The luminance data
> +occupies the first plane. The Y plane has 16 bits per pixel, but only
> +10 bits are used with the rest 6 bits set to zero. In the
> +second plane there is a chrominance data with alternating chroma
> +samples. The CbCr plane is the same width, in bytes, as the Y plane (and
> +of the image), but is half as tall in pixels. Each CbCr pair belongs to
> +four pixels. For example, Cb\ :sub:`0`/Cr\ :sub:`0` belongs to
> +Y'\ :sub:`00`, Y'\ :sub:`01`, Y'\ :sub:`10`, Y'\ :sub:`11`.
> +
> +``V4L2_PIX_FMT_P010M`` is intended to be used only in drivers and
> +applications that support the multi-planar API, described in
> +:ref:`planar-apis`.
> +
> +If the Y plane has pad bytes after each row, then the CbCr plane has as
> +many pad bytes after its rows.
> +
> +**Byte Order.**
> +Each cell is two bytes.
> +
> +.. flat-table::
> + :header-rows: 0
> + :stub-columns: 0
> +
> + * - start0 + 0:
> + - Y'\ :sub:`00`
> + - Y'\ :sub:`01`
> + - Y'\ :sub:`02`
> + - Y'\ :sub:`03`
> + * - start0 + 4:
> + - Y'\ :sub:`10`
> + - Y'\ :sub:`11`
> + - Y'\ :sub:`12`
> + - Y'\ :sub:`13`
> + * - start0 + 8:
> + - Y'\ :sub:`20`
> + - Y'\ :sub:`21`
> + - Y'\ :sub:`22`
> + - Y'\ :sub:`23`
> + * - start0 + 12:
> + - Y'\ :sub:`30`
> + - Y'\ :sub:`31`
> + - Y'\ :sub:`32`
> + - Y'\ :sub:`33`
> + * -
> + * - start1 + 0:
> + - Cb\ :sub:`00`
> + - Cr\ :sub:`00`
> + - Cb\ :sub:`01`
> + - Cr\ :sub:`01`
> + * - start1 + 4:
> + - Cb\ :sub:`10`
> + - Cr\ :sub:`10`
> + - Cb\ :sub:`11`
> + - Cr\ :sub:`11`
> +
> +
> +**Color Sample Location..**
> +
> +
> +
> +.. flat-table::
> + :header-rows: 0
> + :stub-columns: 0
> +
> + * -
> + - 0
> + -
> + - 1
> + - 2
> + -
> + - 3
> + * - 0
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> + * -
> + -
> + - C
> + -
> + -
> + - C
> + -
> + * - 1
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> + * -
> + * - 2
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> + * -
> + -
> + - C
> + -
> + -
> + -
> + - C
> + -
> + * - 3
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> diff --git a/Documentation/media/uapi/v4l/pixfmt-p016.rst b/Documentation/media/uapi/v4l/pixfmt-p016.rst
> new file mode 100644
> index 0000000..a6d60b3
> --- /dev/null
> +++ b/Documentation/media/uapi/v4l/pixfmt-p016.rst
> @@ -0,0 +1,125 @@
> +.. -*- coding: utf-8; mode: rst -*-
> +
> +.. _V4L2-PIX-FMT-P016:
> +
> +******************************************************
> +V4L2_PIX_FMT_P016 ('P016')
> +******************************************************
> +
> +
> +V4L2_PIX_FMT_P016
> +Formats with ½ horizontal and vertical chroma resolution. One luminance and
> +one chrominance plane with alternating
> +chroma samples as simliar to ``V4L2_PIX_FMT_NV12``
> +
> +
> +Description
> +===========
> +
> +It is a two-plane versions of the YUV 4:2:0 format. The three
> +components are separated into two sub-images or planes. The Y plane is
> +first. The Y plane has 16 bits per pixel. For ``V4L2_PIX_FMT_P016``, a
> +combined CbCr plane immediately follows the Y plane in memory. The CbCr
> +plane is the same width, in bytes, as the Y plane (and of the image),
> +but is half as tall in pixels. Each CbCr pair belongs to four pixels.
> +For example, Cb\ :sub:`0`/Cr\ :sub:`0` belongs to Y'\ :sub:`00`,
> +Y'\ :sub:`01`, Y'\ :sub:`10`, Y'\ :sub:`11`.
> +If the Y plane has pad bytes after each row, then the CbCr plane has as
> +many pad bytes after its rows.
> +
> +**Byte Order.**
> +Each cell is two bytes.
> +
> +
> +.. flat-table::
> + :header-rows: 0
> + :stub-columns: 0
> +
> + * - start + 0:
> + - Y'\ :sub:`00`
> + - Y'\ :sub:`01`
> + - Y'\ :sub:`02`
> + - Y'\ :sub:`03`
> + * - start + 4:
> + - Y'\ :sub:`10`
> + - Y'\ :sub:`11`
> + - Y'\ :sub:`12`
> + - Y'\ :sub:`13`
> + * - start + 8:
> + - Y'\ :sub:`20`
> + - Y'\ :sub:`21`
> + - Y'\ :sub:`22`
> + - Y'\ :sub:`23`
> + * - start + 12:
> + - Y'\ :sub:`30`
> + - Y'\ :sub:`31`
> + - Y'\ :sub:`32`
> + - Y'\ :sub:`33`
> + * - start + 16:
> + - Cb\ :sub:`00`
> + - Cr\ :sub:`00`
> + - Cb\ :sub:`01`
> + - Cr\ :sub:`01`
> + * - start + 20:
> + - Cb\ :sub:`10`
> + - Cr\ :sub:`10`
> + - Cb\ :sub:`11`
> + - Cr\ :sub:`11`
> +
> +
> +**Color Sample Location..**
> +
> +.. flat-table::
> + :header-rows: 0
> + :stub-columns: 0
> +
> + * -
> + - 0
> + -
> + - 1
> + - 2
> + -
> + - 3
> + * - 0
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> + * -
> + -
> + - C
> + -
> + -
> + - C
> + -
> + * - 1
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> + * -
> + * - 2
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> + * -
> + -
> + - C
> + -
> + -
> + - C
> + -
> + * - 3
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> diff --git a/Documentation/media/uapi/v4l/pixfmt-p016m.rst b/Documentation/media/uapi/v4l/pixfmt-p016m.rst
> new file mode 100644
> index 0000000..14c434d
> --- /dev/null
> +++ b/Documentation/media/uapi/v4l/pixfmt-p016m.rst
> @@ -0,0 +1,134 @@
> +.. -*- coding: utf-8; mode: rst -*-
> +
> +.. _V4L2-PIX-FMT-P016M:
> +
> +***********************************************************************************
> +V4L2_PIX_FMT_P016M ('PM16')
> +***********************************************************************************
> +
> +
> +V4L2_PIX_FMT_P016M
> +Variation of ``V4L2_PIX_FMT_P016`` with planes non contiguous in memory.
> +
> +
> +Description
> +===========
> +
> +This is a multi-planar, two-plane version of the YUV 4:2:0 format. The
> +three components are separated into two sub-images or planes.
> +``V4L2_PIX_FMT_P016M`` differs from ``V4L2_PIX_FMT_P016`` in that the
> +two planes are non-contiguous in memory, i.e. the chroma plane do not
> +necessarily immediately follows the luma plane. The luminance data
> +occupies the first plane. The Y plane has 16 bits per pixel. In the
> +second plane there is a chrominance data with alternating chroma
> +samples. The CbCr plane is the same width, in bytes, as the Y plane (and
> +of the image), but is half as tall in pixels. Each CbCr pair belongs to
> +four pixels. For example, Cb\ :sub:`0`/Cr\ :sub:`0` belongs to
> +Y'\ :sub:`00`, Y'\ :sub:`01`, Y'\ :sub:`10`, Y'\ :sub:`11`.
> +
> +``V4L2_PIX_FMT_P016M`` is intended to be used only in drivers and
> +applications that support the multi-planar API, described in
> +:ref:`planar-apis`.
> +
> +If the Y plane has pad bytes after each row, then the CbCr plane has as
> +many pad bytes after its rows.
> +
> +**Byte Order.**
> +Each cell is two bytes.
> +
> +.. flat-table::
> + :header-rows: 0
> + :stub-columns: 0
> +
> + * - start0 + 0:
> + - Y'\ :sub:`00`
> + - Y'\ :sub:`01`
> + - Y'\ :sub:`02`
> + - Y'\ :sub:`03`
> + * - start0 + 4:
> + - Y'\ :sub:`10`
> + - Y'\ :sub:`11`
> + - Y'\ :sub:`12`
> + - Y'\ :sub:`13`
> + * - start0 + 8:
> + - Y'\ :sub:`20`
> + - Y'\ :sub:`21`
> + - Y'\ :sub:`22`
> + - Y'\ :sub:`23`
> + * - start0 + 12:
> + - Y'\ :sub:`30`
> + - Y'\ :sub:`31`
> + - Y'\ :sub:`32`
> + - Y'\ :sub:`33`
> + * -
> + * - start1 + 0:
> + - Cb\ :sub:`00`
> + - Cr\ :sub:`00`
> + - Cb\ :sub:`01`
> + - Cr\ :sub:`01`
> + * - start1 + 4:
> + - Cb\ :sub:`10`
> + - Cr\ :sub:`10`
> + - Cb\ :sub:`11`
> + - Cr\ :sub:`11`
> +
> +
> +**Color Sample Location..**
> +
> +
> +
> +.. flat-table::
> + :header-rows: 0
> + :stub-columns: 0
> +
> + * -
> + - 0
> + -
> + - 1
> + - 2
> + -
> + - 3
> + * - 0
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> + * -
> + -
> + - C
> + -
> + -
> + - C
> + -
> + * - 1
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> + * -
> + * - 2
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> + * -
> + -
> + - C
> + -
> + -
> + -
> + - C
> + -
> + * - 3
> + - Y
> + -
> + - Y
> + - Y
> + -
> + - Y
> diff --git a/Documentation/media/uapi/v4l/yuv-formats.rst b/Documentation/media/uapi/v4l/yuv-formats.rst
> index 3334ea4..1474192 100644
> --- a/Documentation/media/uapi/v4l/yuv-formats.rst
> +++ b/Documentation/media/uapi/v4l/yuv-formats.rst
> @@ -53,3 +53,7 @@ to brightness information.
> pixfmt-nv16m
> pixfmt-nv24
> pixfmt-m420
> + pixfmt-p010
> + pixfmt-p010m
> + pixfmt-p016
> + pixfmt-p016m
> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
> index 45184a2..d2f2013 100644
> --- a/include/uapi/linux/videodev2.h
> +++ b/include/uapi/linux/videodev2.h
> @@ -550,6 +550,8 @@ struct v4l2_pix_format {
> #define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */
> #define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */
> #define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */
> +#define V4L2_PIX_FMT_P010 v4l2_fourcc('P', '0', '1', '0') /* 20 Y/CbCr 4:2:0, 10 bits per channel */
> +#define V4L2_PIX_FMT_P016 v4l2_fourcc('P', '0', '1', '6') /* 32 Y/CbCr 4:2:0, 16 bits per channel */
>
> /* two non contiguous planes - one Y, one Cr + Cb interleaved */
> #define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */
> @@ -558,6 +560,9 @@ struct v4l2_pix_format {
> #define V4L2_PIX_FMT_NV61M v4l2_fourcc('N', 'M', '6', '1') /* 16 Y/CrCb 4:2:2 */
> #define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 macroblocks */
> #define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 macroblocks */
> +#define V4L2_PIX_FMT_P010M v4l2_fourcc('P', 'M', '1', '0') /* 32 Y/CbCr 4:2:0, 10 bits per channel */
> +#define V4L2_PIX_FMT_P016M v4l2_fourcc('P', 'M', '1', '6') /* 32 Y/CbCr 4:2:0, 16 bits per channel */
> +#define V4L2_PIX_FMT_P010CM v4l2_fourcc('C', 'M', '1', '0') /* 20 Y/CbCr 4:2:0, 10 bits per channel, compact format */
>
> /* three planes - Y Cb, Cr */
> #define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */
Thanks,
Mauro
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
