2017-04-13 16:05 keltezéssel, Alex Deucher írta:
On Thu, Apr 13, 2017 at 9:03 AM, Boszormenyi Zoltan <zboszor@xxxxx> wrote:
Hi,
how can I disable the behaviour in the KMS drivers
that enables all outputs at once?
It is very annoying that on a POS machine with an
1024x768 LVDS and a 800x480 secondary monitor (both built-in)
the KMS driver wakes up both. Then the framebuffer console
and plymouth use both screens, making the primary output
very odd with only the top-left part used by the boot splash.
I would like the boot splash to be shown only on the primary
output at its full resolution instead of on all outputs using
the smallest common rectangle.
Is there a kernel command line configuration that achieves this?
The device in question uses the gma500 kernel driver but the same
behaviour is observed with the i915 and radeon drivers.
The problem is fbdev is not multi-head aware. The fbdev emulation in
the KMS drivers attempts to light up all monitors so that something
shows up on all heads. If you really want different per head
configurations, you need to use the KMS API directly. As a
workaround, you can use the kernel command line to disable the output
you don't want to be lit up. See:
https://wiki.archlinux.org/index.php/kernel_mode_setting
for more info. basically add video=TV-1:d to disable the output in
question. Replace TV-1 with whatever connector you want to disable.
I tried adding video=DVI-D-1:d to the kernel command line.
The effect is while the second output is indeed disabled, the
framebuffer console still takes the second output's resolution
into account and the boot splash is still using only the top-left
800x480 part of the 1024x768 primary screen.
Also, the secondary screen got disabled also in X which is not desired.
Can I wake it up under X somehow? This device is using the modesetting
DDX driver.
Thanks,
Zoltán
Alex
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
