Hi Tomi,
Thank you for the patch.
On Tuesday 28 Mar 2017 16:08:12 Tomi Valkeinen wrote:
> From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
>
> The associated backlight device can be configured via DT by providing the
> phandle to the device.
>
> If the backlight device is configured, the driver can manage the backligt
> along with the panel's power state, iow it can turn on the backlight when
> the panel is enabled and turn it off when the panel is disabled.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> ---
> drivers/gpu/drm/omapdrm/displays/panel-dpi.c | 37 ++++++++++++++++++++++--
The backlight property is missing from the DT bindings.
> 1 file changed, 35 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
> b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c index
> 38003208d9ca..51fc78eb212c 100644
> --- a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
> +++ b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
> @@ -16,6 +16,7 @@
> #include <linux/of.h>
> #include <linux/of_gpio.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/backlight.h>
>
> #include <video/omap-panel-data.h>
> #include <video/of_display_timing.h>
> @@ -30,6 +31,8 @@ struct panel_drv_data {
>
> struct videomode vm;
>
> + struct backlight_device *backlight;
> +
> /* used for non-DT boot, to be removed */
> int backlight_gpio;
>
> @@ -97,6 +100,11 @@ static int panel_dpi_enable(struct omap_dss_device
> *dssdev) if (gpio_is_valid(ddata->backlight_gpio))
> gpio_set_value_cansleep(ddata->backlight_gpio, 1);
>
> + if (ddata->backlight) {
> + ddata->backlight->props.power = FB_BLANK_UNBLANK;
> + backlight_update_status(ddata->backlight);
> + }
> +
> dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
>
> return 0;
> @@ -113,6 +121,11 @@ static void panel_dpi_disable(struct omap_dss_device
> *dssdev) if (gpio_is_valid(ddata->backlight_gpio))
> gpio_set_value_cansleep(ddata->backlight_gpio, 0);
>
> + if (ddata->backlight) {
> + ddata->backlight->props.power = FB_BLANK_POWERDOWN;
> + backlight_update_status(ddata->backlight);
> + }
> +
> gpiod_set_value_cansleep(ddata->enable_gpio, 0);
> regulator_disable(ddata->vcc_supply);
>
> @@ -209,6 +222,7 @@ static int panel_dpi_probe_of(struct platform_device
> *pdev) {
> struct panel_drv_data *ddata = platform_get_drvdata(pdev);
> struct device_node *node = pdev->dev.of_node;
> + struct device_node *bl_node;
> struct omap_dss_device *in;
> int r;
> struct display_timing timing;
> @@ -236,10 +250,19 @@ static int panel_dpi_probe_of(struct platform_device
> *pdev)
>
> ddata->backlight_gpio = -ENOENT;
>
> + bl_node = of_parse_phandle(node, "backlight", 0);
> + if (bl_node) {
> + ddata->backlight = of_find_backlight_by_node(bl_node);
> + of_node_put(bl_node);
> +
> + if (!ddata->backlight)
> + return -EPROBE_DEFER;
> + }
> +
> r = of_get_display_timing(node, "panel-timing", &timing);
> if (r) {
> dev_err(&pdev->dev, "failed to get video timing\n");
> - return r;
> + goto free_backlight;
> }
>
> videomode_from_timing(&timing, &ddata->vm);
> @@ -247,12 +270,19 @@ static int panel_dpi_probe_of(struct platform_device
> *pdev) in = omapdss_of_find_source_for_first_ep(node);
> if (IS_ERR(in)) {
> dev_err(&pdev->dev, "failed to find video source\n");
> - return PTR_ERR(in);
> + r = PTR_ERR(in);
> + goto free_backlight;
> }
>
> ddata->in = in;
>
> return 0;
> +
> +free_backlight:
I would name this error_free_backlight to clearly show it's an error label, or
just error as there's a single one.
> + if (ddata->backlight)
> + put_device(&ddata->backlight->dev);
> +
> + return r;
> }
>
> static int panel_dpi_probe(struct platform_device *pdev)
> @@ -321,6 +351,9 @@ static int __exit panel_dpi_remove(struct
> platform_device *pdev)
>
> omap_dss_put_device(in);
>
> + if (ddata->backlight)
> + put_device(&ddata->backlight->dev);
> +
> return 0;
> }
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
