Enable stereoscopic output for HDMI and DisplayPort connectors on NV50+ (G80+) hardware. We do not enable stereoscopy on older hardware in case there is some older board that still has HDMI output but for which we have no logic for setting the Vendor InfoFrame. With this, I get an obvious 3D output when using the "testdisplay" program from intel-gpu-tools with the "-3" parameter and outputting to a 3D-capable HDMI display, for all available 3D modes (be they TB, SBSH, or FP) on all four G80+ DISPs. Signed-off-by: Alastair Bridgewater <alastair.bridgewater@xxxxxxxxx> --- drivers/gpu/drm/nouveau/nouveau_connector.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 4e3563e..a2ee93a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -1322,6 +1322,13 @@ nouveau_connector_create(struct drm_device *dev, int index) break; } + /* HDMI 3D support */ + if ((disp->disp.oclass >= NV50_DISP) + && ((type == DRM_MODE_CONNECTOR_DisplayPort) + || (type == DRM_MODE_CONNECTOR_eDP) + || (type == DRM_MODE_CONNECTOR_HDMIA))) + connector->stereo_allowed = true; + /* defaults, will get overridden in detect() */ connector->interlace_allowed = false; connector->doublescan_allowed = false; -- 2.10.2 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
