On 03/07/2017 05:42 PM, Neil Armstrong wrote: > In order to describe the RGB and YUB bus formats used to feed the > Synopsys DesignWare HDMI TX Controller, add missing formats to the > list of Bus Formats. > > Documentation for these formats is added in a separate patch. > > Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> > --- > include/uapi/linux/media-bus-format.h | 13 +++++++++++-- > 1 file changed, 11 insertions(+), 2 deletions(-) > > diff --git a/include/uapi/linux/media-bus-format.h b/include/uapi/linux/media-bus-format.h > index 2168759..7cc820b 100644 > --- a/include/uapi/linux/media-bus-format.h > +++ b/include/uapi/linux/media-bus-format.h > @@ -33,7 +33,7 @@ > > #define MEDIA_BUS_FMT_FIXED 0x0001 > > -/* RGB - next is 0x1018 */ > +/* RGB - next is 0x101b */ > #define MEDIA_BUS_FMT_RGB444_1X12 0x1016 > #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE 0x1001 > #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE 0x1002 > @@ -57,8 +57,11 @@ > #define MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA 0x1012 > #define MEDIA_BUS_FMT_ARGB8888_1X32 0x100d > #define MEDIA_BUS_FMT_RGB888_1X32_PADHI 0x100f > +#define MEDIA_BUS_FMT_RGB101010_1X30 0x1018 > +#define MEDIA_BUS_FMT_RGB121212_1X36 0x1019 > +#define MEDIA_BUS_FMT_RGB161616_1X48 0x101a > > -/* YUV (including grey) - next is 0x2026 */ > +/* YUV (including grey) - next is 0x202c */ > #define MEDIA_BUS_FMT_Y8_1X8 0x2001 > #define MEDIA_BUS_FMT_UV8_1X8 0x2015 > #define MEDIA_BUS_FMT_UYVY8_1_5X8 0x2002 > @@ -90,12 +93,18 @@ > #define MEDIA_BUS_FMT_YVYU10_1X20 0x200e > #define MEDIA_BUS_FMT_VUY8_1X24 0x2024 > #define MEDIA_BUS_FMT_YUV8_1X24 0x2025 > +#define MEDIA_BUS_FMT_UYVY8_1_1X24 0x2026 > #define MEDIA_BUS_FMT_UYVY12_1X24 0x2020 > #define MEDIA_BUS_FMT_VYUY12_1X24 0x2021 > #define MEDIA_BUS_FMT_YUYV12_1X24 0x2022 > #define MEDIA_BUS_FMT_YVYU12_1X24 0x2023 > #define MEDIA_BUS_FMT_YUV10_1X30 0x2016 > +#define MEDIA_BUS_FMT_UYVY10_1_1X30 0x2027 > #define MEDIA_BUS_FMT_AYUV8_1X32 0x2017 > +#define MEDIA_BUS_FMT_UYVY12_1_1X36 0x2028 > +#define MEDIA_BUS_FMT_YUV12_1X36 0x2029 > +#define MEDIA_BUS_FMT_YUV16_1X48 0x202a > +#define MEDIA_BUS_FMT_UYVY16_1_1X48 0x202b > > /* Bayer - next is 0x3021 */ > #define MEDIA_BUS_FMT_SBGGR8_1X8 0x3001 > These new bus formats: #define MEDIA_BUS_FMT_UYVY8_1_1X24 0x2026 #define MEDIA_BUS_FMT_UYVY10_1_1X30 0x2027 #define MEDIA_BUS_FMT_UYVY12_1_1X36 0x2028 #define MEDIA_BUS_FMT_UYVY16_1_1X48 0x202b are all 4:2:0, right? I think these should all be renamed to: #define MEDIA_BUS_FMT_UYYVYY8_1X24 0x2026 #define MEDIA_BUS_FMT_UYYVYY10_1X30 0x2027 #define MEDIA_BUS_FMT_UYYVYY12_1X36 0x2028 #define MEDIA_BUS_FMT_UYYVYY16_1X48 0x202b Conform the other 4:2:0 format MEDIA_BUS_FMT_YDYUYDYV8_1X16 (except without the 'D'!). I am slightly unsure about the _1. Strictly speaking we're transferring two pixels per bus-sample, so _0_5 might be more accurate. Sakari, what's your opinion about that? Regards, Hans _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
